Job description for operating room nurse

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for operating room nurse. Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

A person with a secondary medical education who has undergone special training in working in the surgical dressing unit is appointed to the position of an operating nurse.
Appointed and dismissed by the chief physician of the hospital on the proposal of the chief nurse in accordance with applicable law.
Directly reports to the senior operating nurse, in the process of preparation and during the operation - to the surgeon and his assistants, during the period of duty - to the doctor on duty of the department.
In his work, he is guided by the rules and instructions for the section of work being performed, orders and instructions from higher officials.

II. Official duties

Prepares the operating room and participants for the operation.
Monitors the timely delivery of the patient to the operating room, its correct laying on the operating table and transportation from the operating room.
Provides assistance to participants in the operation during its implementation, providing participants with the necessary tools, materials, equipment.
During the operation, he monitors the timely return of instruments and dressings.
Monitors compliance with the rules of asepsis and antisepsis by all personnel in the operating room.
At the end of the operation, collects tools, counts them; performs the appropriate processing of tools.
Prepares linen, dressing and suture material, clothes, masks, instruments and devices for sterilization; controls the quality of sterilization.
Follows the timely referral for histological and bacteriological examination of the material taken during the operation from the patient.
Maintains required accounting records.
Accepts and hands over duty in the operating unit, checks the availability of sterile linen, materials, solutions, tools, etc., necessary for duty, the serviceability of the equipment, and the sanitary condition of the operating room. After the end of the duty, he counts the spent and remaining surgical linen and materials.

III. Rights

The operating nurse has the right to:

Give orders to the nurse of the operating unit during the operation;
Check the volume and quality of the work performed by the nurses;
Monitor compliance with the rules of asepsis and antisepsis during the operation;
Make suggestions to the senior operating sister and the head of the department on improving the organization of their work;
Receive information necessary for the performance of their duties;
To take part in the work of meetings held in the hospital and department, where issues related to its competence are considered;
Improve professional qualifications in advanced courses or at the workplace in the prescribed manner.

IV. A responsibility

The Operating Room Nurse is responsible for:

performance of the duties assigned to it;
organization of their work, timely and qualified execution of orders, instructions and instructions of the management, regulatory legal acts on their activities;
compliance with internal regulations, fire safety and safety;
timely and high-quality execution of medical and other official documentation provided for by the current regulatory documents;
providing, in accordance with the established procedure, statistical and other information on its activities;
prompt action, including timely informing the management, to eliminate violations of safety, fire and sanitary rules that pose a threat to the activities of the healthcare institution, its employees, patients and visitors.

For violation of labor discipline, legislative and regulatory acts, an operating nurse may be held in accordance with applicable law, depending on the severity of the misconduct, to disciplinary, material, administrative and criminal liability.

We recommend interesting articles Section Job descriptions:

▪ Chief designer of the production department of the television broadcasting department. Job description

▪ Vehicle driver. Job description

▪ Electric and gas welder. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

Fuel from the air 12.06.2018

Canadian specialists from Carbon Engineering have developed a method that will allow using chemical reactions to extract carbon dioxide from the atmosphere. And it, in turn, can be used in the production of gasoline and diesel fuel.

Proposed by Canadian engineers - not the first in this area. However, most of the available technologies remain too expensive. According to various estimates, the cost of obtaining a ton of CO2 is one thousand dollars. Representatives of Carbon Engineering claim that the gas produced using their technology will cost no more than $232 for the same volume.

The authors of the new method actively worked on the creation and improvement of special structures that resemble modern cooling towers. Air is pumped into them with the help of fans and there it interacts with an alkaline solution. The resulting liquid is subsequently frozen, and then gradually heated until it becomes thick. The substance interacts with slaked lime, then carbon dioxide is released. And it can already be used in the production of gasoline and diesel fuel.

Taking into account all the costs, the new fuel will be more expensive than conventional gasoline. But its producers will still be able to compete with companies that receive fuel using standard methods. Experts have already tested the technology at a small facility in British Columbia. If the innovators manage to find sponsors, the engineers plan to build a large plant to produce carbon dioxide using the new technology no later than 2021.

Other interesting news:

▪ puddle drink

▪ Qualcomm 8-core chip

▪ World's largest XNUMXD printed building

▪ City in a wind tunnel

▪ Road traffic can exacerbate allergies

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the site Electrician in the house. Article selection

▪ article Var, Var, give me back my legions! Popular expression

▪ Why Did Director John Ford Lose His Weather Forecaster Service? Detailed answer

▪ article Work on the equipment of seamless fastening of book blocks. Standard instruction on labor protection

▪ article Proportional control equipment. Encyclopedia of radio electronics and electrical engineering

▪ article Reducing fluctuations in the supply network during welding. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews