Job description for the head of the first-aid post

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for the head of the medical center. Full Document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

A doctor (paramedic) who has training (work experience) in emergency care is appointed to the position of the head of the first-aid post.
The head of the first-aid post reports to the head of the civil aviation structural unit, on the basis of which the work of the first-aid post (an aviation enterprise or a medical institution) is organized.
On medical issues, the head of the first-aid post interacts with _______.
Interaction with medical issues may be determined by another established procedure, taking into account the specific working conditions of the first-aid post.
The head of the first-aid post works in accordance with the schedule and is guided in the work by the Regulations on the first-aid post, these Instructions and the charter _______.

II. Official duties

Organization of the work of the first-aid post and control over the work of the medical and other personnel of this unit.
Scheduling medical personnel on duty.
Provision of the first-aid post with medical equipment, tools, medicines, dressings and emergency kits.
Control over the correct storage, expenses and accounting of medicines, especially potent, narcotic, poisonous drugs and dressings.
Providing conditions for the implementation of the tasks and functions of the first-aid post.
Drawing up a schedule for the training of medical personnel in emergency care, medicine and other medical issues and monitoring its implementation.
Organization and conduct of classes with medical workers to provide assistance to victims.
Ensuring safety and labor protection.
Systematic control over the quality of accounting and reporting medical documentation.
Participation in the selection and placement of medical staff.
Appeal to the head of the airport with a proposal to encourage or impose penalties on employees of the first-aid post.
Making proposals to the administration to improve the work of the first-aid post.
Professional development at least once every 1 years.

III. Rights

The head of the medical center has the right to:

Require, in accordance with the established procedure, from the officials of the airport terminal the necessary assistance in organizing the work of the first-aid post.
Involve employees designated by the administration.
Interact and collaborate with local health agencies and medical service.
Prepare requests for obtaining the necessary equipment for the operation of the first-aid post.
Make proposals to eliminate shortcomings in the organization of the work of the first-aid post.
Participate in the preparation and conduct of meetings and meetings on medical care.
Improve their skills through self-education, attending thematic classes, training in special medical institutions.

IV. A responsibility

The head of the medical center is responsible
The head of the first-aid post is responsible for non-fulfillment or improper fulfillment of official duties provided for by this Instruction.

We recommend interesting articles Section Job descriptions:

▪ TV designer. Job description

▪ Psychologist. Job description

▪ Head of production and technical department. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

Flexible and elastic glass 12.03.2014

The US National Laboratory at Los Alamos, known for its central location in the US military nuclear program, has advanced in the development of flexible glass that can be used in mobile devices. The goal of the researchers was to create a "stretchy glass" that would bend when trying to deform or fall.

Scientists conditionally call their development "metallic" glass, since, like metals, it consists of partially structured groups of atoms, in contrast to ordinary (amorphous) glass, in which the atoms of its constituent substances are arranged randomly.

"Usually, plastic deformation leads to immediate glass failure," says Seth Imhoff of the Los Alamos lab. bending under force and then returning to its original shape.

As can be understood from the publication in Product Design And Development, the bending of "metallic" glass occurs on the scale of the so-called "shear bands" 10-20 nanometers in size. The addition of many bends in the nanoscale allows the effect of glass elasticity to appear on the macroscale.

Technology Business Research analyst Ezra Gottheil, commenting on the Los Alamos lab, says stretchable glass could be a big win for mobile device users: "These expensive toys are very vulnerable. Users would be happier if their phones and tablets were more durable. Sellers would have fewer sales but more satisfied customers."

Developers of "metal" glass from Los Alamos, along with other project participants from the universities of Wisconsin, Barcelona and Tohoku in Japan, believe that, in addition to creating flexible gadgets, it could find applications in sports, space technology, etc.

Other interesting news:

▪ Yeast fungi will be sent into outer space

▪ Toshiba EBTZ1041-SK-A1 Wearable IoT Kit

▪ Mobile phone with FM receiver

▪ Charging electric vehicles in 10 minutes

▪ GaN-on-silicon LEDs

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the site Electrician in the house. Article selection

▪ article They don't know what they're doing. Popular expression

▪ article How do plants get their food? Detailed answer

▪ article Adjuster of machine tools and machine tools. Standard instruction on labor protection

▪ article Universal car USB-adapter K-, L-lines. Encyclopedia of radio electronics and electrical engineering

▪ article Scheme, pinout (pinout) cable Panasonic GD-70, GD-90. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews