Job description for a radiologist of the X-ray department (office)

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for a radiologist of the X-ray department (office). Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The main task of the radiologist is the timely and high-quality conduct of X-ray diagnostic studies for patients and X-ray therapy if there is an appropriate room in the department.
The appointment and dismissal of a radiologist is carried out by the chief doctor of the polyclinic in the prescribed manner.
The radiologist reports to the head of the X-ray department (office).
His work is guided by:

guidelines and orders of municipal health authorities,
this job description,
methodological recommendations for improving the work of the X-ray room.

II. Official duties

Regularly carry out the reception of patients according to the schedule approved by the administration of the polyclinic.
Carry out x-ray examinations for patients (fluoroscopy, radiography of organs and systems) in order to make a timely diagnosis and early detection of the disease.
Instruct both the attending physicians and other medical staff of this polyclinic on the preparation of patients for certain types of x-ray examinations.
Supervise the work of junior and middle medical staff of the office, check the correctness and timeliness of the execution of medical orders.
Follow the exact preparation of the recipe for chemical solutions.
Monitor compliance by the X-ray room staff with internal regulations, labor protection and safety regulations, and, if necessary, give instructions to the X-ray laboratory assistant.
Have a work plan and quarterly analyze the main indicators for the X-ray service, participate in the preparation of annual reports of the X-ray room.
Monitor the rational use of x-ray films.
Comply with the rules of safety, labor protection and internal labor regulations.
Before starting work, check the readiness of the equipment, the condition of the measuring instruments and tubes.
Make sure that the X-ray machine is not subjected to loads exceeding the passport data of the equipment.
Comply with established patient care standards.
Ensure compliance with fire prevention measures and, in particular, the correct storage of x-ray films.
Pass a medical examination in a timely manner.
Report immediately to the head of the X-ray room, and in his absence - to the head doctor of the clinic or his deputy for the medical unit about all emergencies (electric shock, radiation injury, fire, etc.) that occurred in the office.
Conduct explanatory work among clinicians about the possible adverse effects of excessive exposure of patients with frequent and unreasonable x-ray examinations.
Improve your theoretical level and professional qualifications by reading specialized literature, participating in the work of the X-ray society, scientific and practical conferences, seminars, ten days, periodic training in advanced training courses.
Participate in the organization and conduct of advanced training activities for the middle and junior medical staff of the cabinet.
Follow the principles of deontology.

III. Rights

The radiologist has the right to:

apply any x-ray method of examination, worked out and accepted in this department (office), in order to identify the disease and decide on the appointment of a patient for an additional x-ray examination;
refuse the X-ray examination prescribed by the attending physician, if it is not necessary;
refer patients, if necessary, to consultations of other specialists (phthisiatrician, neuropathologist, otolaryngologist, etc.), including, with the consent of the head of the department, and a more qualified radiologist, as well as refer patients for additional clinical examination;
to produce, with the permission of the head of the X-ray department, the placement of X-ray laboratory assistants and orderlies of the department in certain areas of work;
do not allow medical personnel who have not undergone a medical examination to work in the X-ray room;
take part in conferences, meetings, medical councils, pathological and anatomical analyzes, discussion of research results, etc.

IV. A responsibility

The radiologist is responsible for:

failure to fulfill the obligations stipulated by the current legal acts and this instruction;
poor quality of his work and his subordinate staff.

We recommend interesting articles Section Job descriptions:

▪ Engineer-adjuster of radio-electronic equipment and devices. Job description

▪ Rheumatologist. Job description

▪ Hydraulic technician. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

Gaming laptop Maingear Pulse 17 07.11.2013

Maingear has announced the Maingear Pulse 17 gaming laptop. According to the manufacturer, this model is the thinnest and most compact 17-inch gaming laptop in the world.

The standard equipment of the notebook includes a 17,3-inch anti-glare matte display with a resolution of 1920 x 1080 pixels; quad-core processor Intel Core i7-4700HQ (2,4-3,4 GHz); 16 GB DDR3-1600 MHz RAM (two 8 GB modules); graphics accelerator Nvidia GeForce GTX 765M; 1TB hard drive and 256GB SSD.

The Maingear Pulse 17 features a multi-color backlit keyboard from SteelSeries. There is also a DVD drive, a 2 MP webcam, a 7-in-1 card reader, an HDMI output, audio jacks, four USB 3.0 ports, two Mini DisplayPort ports, 802.11n Wi-Fi and Bluetooth modules, and a port for connecting a network cable.

Separately noted is the Creative Sound Blaster Cinema audio system, which includes two speakers and a subwoofer. For a fee, it is possible to increase the capacity of the solid state drive up to 512 GB, replace the DVD drive with a Blu-ray burner, and also install an 802.11ac Wi-Fi module.

The laptop measures 418,3 x 286,7 x 21,6 mm and weighs 2,72 kg.

The Maingear Pulse 17 gaming laptop will be available soon for $2099 and will be available in six colors.

Other interesting news:

▪ Laser cooling

▪ Oxygen ion battery

▪ The smell of a partner improves sleep

▪ New speed record for electric cars

▪ Combined dual laser DVD drive

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the site Stories from the life of radio amateurs. Selection of articles

▪ article And submit strawberries here! Popular expression

▪ article Why are some insects harmful to humans? Detailed answer

▪ article Improvement worker. Job description

▪ article Economical chandelier. Encyclopedia of radio electronics and electrical engineering

▪ article Simple powerful voltage regulators. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews