Job description for senior operator

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for senior operator. Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The senior operator belongs to the category of employees.
The senior cameraman is appointed to the position and dismissed by order of the director, in accordance with the terms of the concluded contract, upon the proposal of the Chief Director.
The senior operator must have a higher or secondary specialized education or special training received from a television company.
The senior cameraman reports directly to the Editor-in-Chief in terms of organizing filming, and the Chief Director in terms of ensuring the quality of the filmed video material.
A group of operators of the Company is subordinate to the Senior Operator.
The senior operator must know:

legislation of Ukraine on the media, regulations, orders of the company’s management.
technical means and technology for creating television programs.
exposure metering, framing methods, lighting techniques, reportage and artistic photography techniques.
requirements for filming at the Company: high technical quality, filming with lighting, filming with a tripod, filming montage phrases.
the procedure and timing for submitting information to the Chief Director about the work done.

II. Official duties

The main task of the Senior Operator is the unconditional and high-quality implementation of these instructions, as well as the requirements of the director and immediate supervisor related to labor functions.
Monitors the work process of the Company's operators. Monitors the quality of the footage they film.
Carries out video shooting of stories for information programs or for other Company programs, monitoring the quality of image and sound.
Checks the serviceability of the video camera and other technical equipment before filming.
Prepares chargers before shooting.
Keeps records of the work done.
Stores the video camera, microphone and accessories in specially designated areas (safe).
Complies with internal labor regulations, terms of the employment contract, orders and instructions of the general director and immediate supervisor.

III. Rights

The senior operator has the right:

Get acquainted with the projects for the technical re-equipment of the Company.
Submit proposals for optimization of the work of the Company and specifically operators for consideration by management.
Involve specialists from other divisions of the Company in solving assigned tasks.

IV. A responsibility

The senior operator bears disciplinary and financial responsibility for:

improper performance of duties provided for in this Job Description;
internal labor regulations;
labor contract;
orders and orders of the director, as well as the immediate supervisor.

We recommend interesting articles Section Job descriptions:

▪ Art director for printing. Job description

▪ Day care doctor. Job description

▪ Tiler-tiler. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

Gel that allows you to stick sensors to internal organs 30.12.2014

The ability to track physiological parameters is necessary for scientific research, accurate diagnosis of diseases and monitoring the health of the patient.

One effective way to collect relevant data is to measure electrical and other parameters using sensors. And if everything is more or less clear with the attachment of sensors to the surface of the body, then attaching the electrode to the surface of the internal organ is not so simple. At least, it was before the development of Japanese researchers, which is described in the publications of the Japanese Agency for Science and Technology JST and Nature Communications.

The sensors are supposed to be attached to moist, soft, shape-changing tissues and organs using a special gel based on polyvinyl alcohol. It has elasticity and other properties necessary to ensure reliable contact of sensors with living tissue for at least several hours.

So far, of course, it has only gone as far as animal experiments. But these experiments confirmed the viability of the idea. Scientists hope that over time, the development will find application in medical devices and prostheses.

Other interesting news:

▪ Solar sails for spacecraft

▪ Miniature neural networks of the brain are grown

▪ Earth has another satellite

▪ Sugar based fuel cell

▪ Infinite energy from black holes

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ site section Regulators of current, voltage, power. Article selection

▪ Themis article. Popular expression

▪ article Why is the thumb on the hind foot of a bat called a toilet? Detailed answer

▪ article Weigher. Standard instruction on labor protection

▪ article Energy of the Sun. Encyclopedia of radio electronics and electrical engineering

▪ article Device for tuning KB antennas. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews