Job description for a cleaner of industrial premises

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for a cleaner of industrial premises. Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The cleaner of industrial premises is hired and released from the work performed by order of the director (manager) of the enterprise.
The industrial premises cleaner reports directly to the head of the economic department.
In his work, the cleaner of industrial premises is guided by:

current legislation;
regulation on the economic department;
this Job Description.

Qualification requirements: an employee with secondary general education or incomplete secondary education can be accepted for the position of cleaner of industrial premises without presenting requirements for work experience.
The cleaner of industrial premises must know:

industrial sanitation requirements;
appointment and concentration of disinfectants and detergents;
cleaning rules, device and operating rules for the equipment used.

II. Official duties

Removes production waste and garbage in workshops and other industrial premises.
Wipes dust, sweeps and washes manually or with the help of machines and devices floors, stairs, flights of stairs and landings, windows, walls, ceilings in industrial premises.
Prepares various cleaning and disinfecting solutions for cleaning floors, walls, windows and ceilings.
Transports waste and garbage from production facilities to a designated location.
Receives detergents, inventory and cleaning materials.
Fills tanks with drinking water.
Arranges rubbish bins, cleans and disinfects them.
Cleans and disinfects toilets, showers, dressing rooms and other common areas in the workplace.

III. Rights

The cleaner of industrial premises has the right to:

report to the head of the economic department on all identified shortcomings within their competence;
make proposals for improving the work related to the duties provided for in this Job Description.

IV. A responsibility

The cleaner of industrial premises is responsible for:

quality and timeliness of fulfillment of the duties assigned to him by this Job Description;
compliance with the internal labor regulations of the enterprise;
compliance with instructions on labor protection, fire safety and industrial sanitation.

We recommend interesting articles Section Job descriptions:

▪ Lifter. Job description

▪ Beautician. Job description

▪ Maintenance station manager. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

New digital IGBT driver 31.08.2008

Semikron has introduced a new generation of IGBT gate drivers. The SKYPER 52 driver, based on a digital signal processor, allows the transmission of isolated control and sensor signals, as well as individual setting of the protection circuit.

The use of the SKYPER 52 driver makes it possible to simplify and reduce the cost of developing powerful converter devices and improve the reliability of the entire system. The SKYPER 52 digital driver is designed to drive IGBTs with an operating voltage of 1200 and 1700 V.

With 9W per channel and up to 50A peak output current, it is capable of paralleling modules with a total collector current of 9000A. In addition, the SKYPER 52 is suitable for high-frequency applications that require a powerful control circuit capable of operating at frequencies up to 100 kHz.

The driver isolation voltage is 4 kV and the gate turn-off voltage is -15 V. Input signal levels of 3,3 and 5 V (LVDS standard) make it possible to connect the SKYPER 52 directly to the output of the microcontroller.

Other interesting news:

▪ Gravity Accumulator

▪ Bluetooth range - more than 200 meters

▪ Apple MacBook

▪ JVC DLA-Z4 1K projector

▪ Communication with sensors through the wall

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the website Electrotechnical materials. Article selection

▪ article Hard to learn, easy to fight. Popular expression

▪ article Where do buns grow on trees? Detailed answer

▪ article Cystitis. Health care

▪ article Capacitance meter. Encyclopedia of radio electronics and electrical engineering

▪ article A simple extension cord for the remote control. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews