Free technical library

Job description for the chief engineer of the project. Full Document

Occupational Safety and Health / Job descriptions

 Comments on the article

I. General Provisions

1. The chief project engineer (CPI) is appointed by order of the general director of the enterprise from among the managers or specialists.
2. The Chief Project Engineer must have:

• higher professional (technical) education;
• at least 5 years of experience in the gas industry;
• a certificate confirming completion of training in the design of gas supply systems.

3. In his work, the chief engineer of the project is guided by the current Rules, SNiPs, GOSTs, methodological and regulatory materials for the design of gas supply systems, guidelines for the development and execution of design estimates, the Regulations on the internal production quality control system for design work, as well as this Job Description.

II. Tasks and responsibilities

The Chief Project Engineer is responsible for:

1. Provide technical guidance for projects.
2. Review and approve design estimates.
3. Based on the use of the most expedient and economical design solutions, to ensure a high technical and economic level of the designed facilities and the quality of design estimates.
4. Participate in the coordination of design decisions and in the discussion of the project in higher organizations and examination bodies.
5. Analyze and generalize the experience of design, construction and operation of the constructed facilities, prepare on this basis proposals for improving the design and implementation of measures to improve the technical and economic level of design solutions.
6. Monitor the obligatory compliance with the requirements of the current SNiPs, GOSTs, rules, instructions and guidelines for design and other methodological and regulatory documents when implementing projects for gasification.
7. Monitor the validity period, timely renewal and making the necessary changes to the license for design work.

III. Rights

The chief project engineer has the right to:

1. Submit proposals for the consideration of the General Director on improving the work related to the duties provided for in this instruction.
2. Refuse to approve and return for revision the design and estimate documentation, made in violation of the requirements of the current regulatory and guidance materials, as well as deviations from the technical specifications.
3. Suspend project team personnel from work in case of gross violations of current regulatory requirements in the project documentation.

IV. A responsibility

The Chief Project Engineer is responsible for:

1. organizing the activities of the project team;
2. high-quality and timely execution of design estimates;
3. compliance with the requirements of this Job Description.

 We recommend interesting articles Section Job descriptions:

▪  Chief designer of the production department of the television broadcasting department. Job description

▪ Sales assistant-cashier. Job description

▪ Enamel burner. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive Iron mining on Mars 01.10.2022 Australian researchers at Swinburne University of Technology have developed a process to produce iron on Mars. They propose using concentrated sunlight as an energy source, and extracting iron from regolith using carbothermal reduction. Experiments on the Perseverance rover have shown the possibility of extracting oxygen on the Red Planet using the electrolysis of carbon dioxide (CO2). During this process, a large amount of carbon monoxide (CO) is released as a by-product. The researchers propose to combine an oxygen plant with iron production to use by-products. In their calculations, the scientists showed that the hot gas produced by the electrolysis of carbon dioxide would be rich in CO (91%). It can be used to preheat regolith. In addition, by condensing the monoxide, pure carbon can be obtained. The researchers analyzed the composition of the Martian regolith (soil) and found that by adding 10% carbon to it at a temperature of 1120 ° C and a pressure of 7 mbar (atmospheric pressure on Mars), liquid iron can be obtained with a conversion of 99,9%. In this case, the alloy will contain a small amount of impurities of carbon, silicon, phosphorus and chromium. Experts believe that the resulting material can be used for the independent production of various machines and devices for a colony on Mars. The technology is based solely on local materials and does not require the delivery of goods from the Earth.

Other interesting news:

▪ Programmable Signal Generator LTC6903/6904

▪ Marine fish are toxic and carcinogenic

▪ ASRock Mars 4000U Mini PC

▪ MESO instead of CMOS

▪ Refueling at home

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ site section Welding equipment. Article selection

▪ article Victim of public temperament. Popular expression

▪ article What is ceramics? Detailed answer

▪ article Communication node controller. Job description

▪ article Ink powders. Simple recipes and tips

▪ article Who touched the mirror? Focus secret. Focus Secret

Leave your comment on this article:

All languages ​​of this page

Arabic	Hebrew	Polish
Bengali	Hindi	Portuguese
Chinese	Italian	Spanish
English	Japanese	Turkish
French	Korean	Ukrainian
German	Malay	Vietnamese

Home page | Library | Articles | Website map | Site Reviews

www.diagram.com.ua
2000-2024