Turning one card into another. Effective trick and its solution

Free technical library

EFFECTIVE FOCUSES AND THEIR CLUES
Free library / Directory / Spectacular tricks and their clues

Turning one card into another. Focus secret

Spectacular tricks and their clues

Directory / Spectacular tricks and their clues

Comments on the article

Focus Description:

You can turn one card into another or change its suit. For example, the king of spades can become the king of hearts.

Focus secret:

To do this, you only need to change the point in the corner of the map. This can be achieved with a double card. In this case, that part of the middle side is cut out, on which there should be a point. The back card is glued to the front only at the edges, it is completely white, only in its upper corner there is a point, for example, a spade. This point will be visible in the hole made in the top card, and due to this the card will change its suit.

Focus Turning one card into another

Between these two cards is a movable plate, driven by a pin passing through the back side, on which (meaning the plate) a red point is drawn. By setting this plate in motion, you place a red point in front of the hole that borders the spade point. This makes the card look like a king of hearts.

If you have modern cards, then in this case both spectacle parts on the front card are cut out. And on the card lying under this card a spade point is drawn.

A movable plate of such a shape and size that it can cover either the top or the middle of the card. If such a plate is moved up, then the card becomes a spade suit, if this plate is lowered, then the peak point of the back card opens, and the plate closes its red point. Moreover, the card will depict the king of spades.

This mechanical map can be used in a variety of ways. For example, it fits perfectly into focus with a card "coming out" from the deck. In this case, the mechanical card must be one of the "coming out" cards and depict the king of hearts.

When you summon the King of Hearts, a mechanical card will appear showing the King of Spades. You are surprised to ask the viewer if he really chose the king of hearts. Since the viewer will insist on her own, then you, as if tired of arguing, agree to turn her into the king of worms.

With these words, you take a card and hold it with your middle and thumb, touching its front side with a magic wand and at the same time with your index finger, move the plate. In this case, the card turns into the king of hearts. But you can further notice that the viewer is still mistaken and, in order not to spoil the deck with two kings, you will again turn it into the king of spades. What do you do with your magic wand.

Another way to use mechanical charts is to use cardboard boxes. In this case, we need two mechanical cards. One of them, made in the form of the king of spades, is hidden in one box in advance, and the other, in the form of the king of hearts, is in another.

Two spectators are invited to choose one card each. You force two ordinary kings of the corresponding suits with it. After taking cards from the audience and showing the boxes so that they look empty, you place a card in each of them. Moreover, you put the king of hearts in the box with the king of spades and vice versa.

You close both boxes and order both cards to switch places. By opening the boxes, you demonstrate obedience to the cards. Then say:

“You probably think that these boxes are so clever. To prove to you that this is not so, I will again order the cards to change places, but this time I will not put them in boxes, but only take one in each hand. If you're careful enough, you'll see the cards go from one hand to the other. Notice that the king of spades is in my right hand and the king of hearts is in my left. One, two, three!"

You accompany these words with a kick and the movement of cards.

"Did you see how they flew? Here is the king of hearts in my right hand, and the king of spades was in my left, and I put each one in my box."

You put each card in the box that it previously occupied, and again make the transformation without locking the boxes. You continue:

"Take the trouble to notice in which box I put which card: the king of hearts in the box on the right, and the king of spades in the box on the left."

The audience agrees with you.

"Excuse me," you say, "it seems you made a mistake. You may not have noticed that the cards have changed places again." You demonstrate to everyone that this is indeed the case, and then close the boxes so that the originally selected cards are on top.

Opening the boxes, you show that they have changed places again, say:

"I have already proved to you that the secret of the trick is not in the boxes. Perhaps you would like to inspect the cards themselves?"

With these words, you give the cards to the spectators for inspection.

The transformation of one card into another can also be achieved with the help of a "flip" card. This is a map, across which in the middle is attached a movable plate of half its size. When the plate is folded in one direction, it covers the top of the card, flipping it in the other direction, you close the bottom half of it.

Focus Turning one card into another

Let the lady of clubs (whose back side is cut off) be pasted on one of these halves, and nine tambourines, made in the same way, on the other.

Such a card will alternately be the queen of clubs, then the nine of tambourines, depending on where the plate is bent. The rubber band tends to bend it down so that in the normal position the card becomes the nine of tambourines. When you show the card to the audience, the plate is folded in the opposite direction so that the card becomes the queen of clubs.

You can hold the rubber band with your thumb and forefinger until the appropriate moment. If the pressure stops, then the plate will rise, and the card will immediately turn into a nine of diamonds.

Author: Louis Hoffmann

We recommend interesting articles Section Spectacular tricks and their clues:

▪ Living computer

▪ Afghan rings

▪ Artificial coloring of flowers

See other articles Section Spectacular tricks and their clues.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

The threat of space debris to the Earth's magnetic field 01.05.2024

More and more often we hear about an increase in the amount of space debris surrounding our planet. However, it is not only active satellites and spacecraft that contribute to this problem, but also debris from old missions. The growing number of satellites launched by companies like SpaceX creates not only opportunities for the development of the Internet, but also serious threats to space security. Experts are now turning their attention to the potential implications for the Earth's magnetic field. Dr. Jonathan McDowell of the Harvard-Smithsonian Center for Astrophysics emphasizes that companies are rapidly deploying satellite constellations, and the number of satellites could grow to 100 in the next decade. The rapid development of these cosmic armadas of satellites can lead to contamination of the Earth's plasma environment with dangerous debris and a threat to the stability of the magnetosphere. Metal debris from used rockets can disrupt the ionosphere and magnetosphere. Both of these systems play a key role in protecting the atmosphere and maintaining ... >>

Solidification of bulk substances 30.04.2024

There are quite a few mysteries in the world of science, and one of them is the strange behavior of bulk materials. They may behave like a solid but suddenly turn into a flowing liquid. This phenomenon has attracted the attention of many researchers, and we may finally be getting closer to solving this mystery. Imagine sand in an hourglass. It usually flows freely, but in some cases its particles begin to get stuck, turning from a liquid to a solid. This transition has important implications for many areas, from drug production to construction. Researchers from the USA have attempted to describe this phenomenon and come closer to understanding it. In the study, the scientists conducted simulations in the laboratory using data from bags of polystyrene beads. They found that the vibrations within these sets had specific frequencies, meaning that only certain types of vibrations could travel through the material. Received ... >>

Random news from the Archive

High resolution fluorescence microscopy 17.10.2014

To view the cell and its contents, we must take a microscope. Its principle of operation is relatively simple: light rays pass through an object and then enter magnifying lenses, so that we can see both the cell and some of the organelles inside it, such as the nucleus or mitochondria.

But if we want to see a protein or DNA molecule, or look at a large supramolecular complex like a ribosome, or a virus particle, then an ordinary light microscope will be useless. Back in 1873, the German physicist Ernst Abbe deduced a formula that puts a limit on the capabilities of any light microscope: it turns out that it is impossible to see an object smaller than half the wavelength of visible light - that is, less than 0,2 micrometers.

The solution, obviously, is to choose something that can replace visible light. You can use an electron beam, and then we get an electron microscope - you can observe viruses and protein molecules in it, but the observed objects during electron microscopy fall into completely unnatural conditions. Therefore, the idea of Stefan W. Hell from the Institute for Biophysical Chemistry of the Max Planck Society (Germany) turned out to be extremely successful.

The essence of the idea was that an object could be irradiated with a laser beam, which would put biological molecules into an excited state. From this state, they will begin to move into the normal state, freeing themselves from excess energy in the form of light radiation - that is, fluorescence will begin, and the molecules will become visible. But the emitted waves will be of very different lengths, and we will have an indefinite spot before our eyes. To prevent this from happening, together with the excitation laser, the object is treated with a quenching beam, which suppresses all waves except those that have a nanometer length. Radiation with a wavelength of the order of nanometers just makes it possible to distinguish one molecule from another.

The method was called STED (stimulated emission depletion), and it was for this that Stefan Hell received his part of the Nobel Prize. With STED microscopy, the object is not completely covered by laser excitation at once, but is, as it were, drawn by two thin beams of rays (exciter and quencher), because the smaller the area that fluoresces at a given time, the higher the image resolution.

The STED method was subsequently supplemented by so-called single-molecule microscopy, developed independently in the late XNUMXth century by two other current laureates, Eric Betzig of the Howard Hughes Institute and William E. Moerner of Stanford. In most physicochemical methods that rely on fluorescence, we observe the total radiation of many molecules at once. William Merner just proposed a method by which one can observe the radiation of a single molecule. While experimenting with green fluorescent protein (GFP), he noticed that the glow of its molecules can be arbitrarily turned on and off by manipulating the excitation wavelength. By turning on and off the fluorescence of different GFP molecules, they could be observed in a light microscope, ignoring the Abbe nanometer limitation. The whole image could be obtained by simply combining several images with different luminous molecules in the field of view. These data were supplemented by the ideas of Eric Betzig, who proposed to increase the resolution of fluorescence microscopy by using proteins with different optical properties (that is, roughly speaking, multi-colored).

The combination of Hell's excitation-quenching method with the Betzig-Merner sum-imposition method has made it possible to develop nanometer-resolution microscopy. With its help, we can observe not only organelles and their fragments, but also the interactions of molecules with each other (if the molecules are labeled with fluorescent proteins), which, we repeat, is far from always possible with electron microscopy methods. The value of the method can hardly be overestimated, because intermolecular contacts are what molecular biology stands on and without which it is impossible, for example, neither the creation of new drugs, nor the decoding of genetic mechanisms, nor many other things that lie in the field of modern science and technology.

Other interesting news:

▪ Ultra-budget smartphone Infinix Smart 7 HD

▪ Dell Latitude 9000, 7000 and 5000 laptops

▪ Universal card reader

▪ Shower from triangular holes

▪ US military looking for aliens

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ site section Preamplifiers. Article selection

▪ article Ten commandments for the cameraman. video art

▪ article Why did ancient Russian medallions combine Christian themes with images of snakes? Detailed answer

▪ Article Food Seller. Job description

▪ article Tuning antennas with a frequency response meter. Encyclopedia of radio electronics and electrical engineering

▪ article Light the lamp with a match! chemical experience. Chemical Experience

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews