The four kings are together. Effective trick and its solution

Free technical library

EFFECTIVE FOCUSES AND THEIR CLUES
Free library / Directory / Spectacular tricks and their clues

The four kings are together. Focus secret

Spectacular tricks and their clues

Directory / Spectacular tricks and their clues

Comments on the article

Focus Description:

Four kings are placed in different parts of the deck and after its removal they are together.

Focus Four kings are together

Focus secret:

We take four kings and unfold them like a fan.

Imperceptibly to the public, we put two others behind the second card. It doesn't matter what kind of cards they are, because they will be hidden behind the king. Having shown the kings to the audience, we fold them and put them on top of the deck.

We draw the attention of the audience that we put the kings in different parts of the deck. We take the first card, which is actually a king, and put it on the bottom of the deck. Then we take the next card, which the audience also considers the king, and put it in the middle of the deck, the other a little higher in the deck. Then we take the fourth card, which is also a king, and therefore show it to the audience. This card is placed on top of the deck.

We have three kings at the top of the deck and one at the bottom. It remains only to remove the deck - and all the kings are nearby.

Queens and jacks work well for additional cards behind the king because they are not as different from kings as other cards if someone takes a casual look at them during the distribution of cards in the deck.

Author: Louis Hoffmann

We recommend interesting articles Section Spectacular tricks and their clues:

▪ Wallet not giving away things

▪ Smoke in a glass

▪ Glass of water from pocket

See other articles Section Spectacular tricks and their clues.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

The threat of space debris to the Earth's magnetic field 01.05.2024

More and more often we hear about an increase in the amount of space debris surrounding our planet. However, it is not only active satellites and spacecraft that contribute to this problem, but also debris from old missions. The growing number of satellites launched by companies like SpaceX creates not only opportunities for the development of the Internet, but also serious threats to space security. Experts are now turning their attention to the potential implications for the Earth's magnetic field. Dr. Jonathan McDowell of the Harvard-Smithsonian Center for Astrophysics emphasizes that companies are rapidly deploying satellite constellations, and the number of satellites could grow to 100 in the next decade. The rapid development of these cosmic armadas of satellites can lead to contamination of the Earth's plasma environment with dangerous debris and a threat to the stability of the magnetosphere. Metal debris from used rockets can disrupt the ionosphere and magnetosphere. Both of these systems play a key role in protecting the atmosphere and maintaining ... >>

Solidification of bulk substances 30.04.2024

There are quite a few mysteries in the world of science, and one of them is the strange behavior of bulk materials. They may behave like a solid but suddenly turn into a flowing liquid. This phenomenon has attracted the attention of many researchers, and we may finally be getting closer to solving this mystery. Imagine sand in an hourglass. It usually flows freely, but in some cases its particles begin to get stuck, turning from a liquid to a solid. This transition has important implications for many areas, from drug production to construction. Researchers from the USA have attempted to describe this phenomenon and come closer to understanding it. In the study, the scientists conducted simulations in the laboratory using data from bags of polystyrene beads. They found that the vibrations within these sets had specific frequencies, meaning that only certain types of vibrations could travel through the material. Received ... >>

Random news from the Archive

Chameleon tanks 04.10.2016

In the Australian city of Adelaide, the annual exhibition Land Forces 2016 (Land Forces 2016), held by the Australian Department of Defense, took place. Particular attention at the exhibition was attracted by new technologies that allow tanks to change the color and structure of the camouflage pattern.

Despite the developments in the field of adaptive camouflage that have appeared in recent years, its use is limited to experiments related to the field uniform of fighters. And the camouflage of armored vehicles remains static, drawn on the object that it protects, with reference to the landscape and landscape of the theater of operations. To solve the problem, researchers at the University of South Australia, in collaboration with scientists from the Department of Defense Science and Technology Group, began developing adaptive camouflage for tanks using conductive polymers.

To do this, the armor would be coated with hermetically sealed electrochromic cells containing thin layers of polymer with an electrolyte between them. When an electric current is passed, the color of the polymer changes, and different shades can be achieved by changing the chemical structure of the polymers. The surface of the cells can be made from various materials, including glass, polycarbonate, or even polyethylene terephthalate (Dacron).

The main requirement for the application of this technology is the strength and low weight of electrochromic cells. Standard vehicle usage conditions assume normal operation in the temperature range of -40 to 80°C. In addition, the cells must withstand impact and scratches and withstand exposure to ultraviolet light. The work of Australian scientists is now focused on creating lightweight flexible cells up to 20 x 20 cm in size. They are attached to the surface of the tank with double-sided adhesive material and connected to the battery for power.

Other interesting news:

▪ liquid lens

▪ Reconstructed the navel of the earth

▪ Flying over Venus

▪ Comparator Texas Instruments TLV3691IDCKR

▪ Mobile phone with two cameras

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ site section Voltage converters, rectifiers, inverters. Article selection

▪ article Miracle-yudo fish-whale. Popular expression

▪ article Why was the Voice of America not allowed to broadcast in the United States until 2013? Detailed answer

▪ article Specialist, engineering and technical worker, administrative and managerial personnel. Standard instruction on labor protection

▪ article VHF radio transmitter. Encyclopedia of radio electronics and electrical engineering

▪ article Battery charge-discharge device. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews