Menu English Ukrainian russian Home

Free technical library for hobbyists and professionals Free technical library


ENCYCLOPEDIA OF RADIO ELECTRONICS AND ELECTRICAL ENGINEERING
Free library / Encyclopedia of radio electronics and electrical engineering / Electrician

Annex 3. Standards for testing electrical equipment and apparatus for electrical installations of consumers

Electrode boilers

Free technical library

Encyclopedia of radio electronics and electrical engineering / Rules for the technical operation of consumer electrical installations (PTE)

Comments on the article Comments on the article

K, T or M - are produced within the time limits established by the PPR system.

Name of the test Type of test Test norms Directions
25.1. Measurement of the resistance of the water column of the insulating insert K, T or M The resistance of the water column (Ohm) in each of the inserts must be at least 0,06Uф×n; where Uф - phase voltage of the electrode boiler, V; n - the number of insulating inserts of all boilers in the boiler room Measured for electrode boilers with voltages above 1000 V
Not less than 200n Measured for electrode boilers up to 1000 V
25.2. Measuring the resistivity of feed (mains) water K, M At 20°C must be within the limits specified by the manufacturer It is measured at electrode boilers before start-up and when changing the source of water supply, and when supplied from open reservoirs - at least 4 times a year
25.3. Power frequency overvoltage test: К Test duration - 1 min. -
1) insulation of the boiler body together with insulating inserts freed from water   See table. 5 (Annex 3.1) -
2) insulating inserts   Produced by two times the rated phase voltage -
25.4. Boiler insulation resistance measurement without water К Not less than 0,5 MΩ, unless higher requirements are specified by the manufacturer Measured in the position of the electrodes at maximum and minimum power in relation to the body with a megohmmeter for a voltage of 2500 V
25.5. Checking the operation of the boiler safety equipment K, T, M Manufactured in accordance with local regulations and manufacturer's instructions  

See other articles Section Rules for the technical operation of consumer electrical installations (PTE).

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

acid underground 04.02.2007

It has long been proposed to pump at least some of the carbon dioxide produced by burning fossil fuels underground to combat global warming. By staying there, this gas will not contribute to the greenhouse effect.

Since the spring of 2006, a thermal power plant has already been opened in Belgium, sending its combustion products to underground layers. Norway has started pumping carbon dioxide under the bottom of the North Sea, into depleted oil wells, a similar project is being prepared in Algeria. But it is not clear how reliable this method of storing harmful gas is, whether the gas will begin to seep into the atmosphere.

A group of American geophysicists decided to study the processes taking place underground. They pumped 1600 tons of liquid carbon dioxide into sandstone formations at a depth of one and a half kilometers near Houston, Texas. For the year that has passed since the beginning of the experiment, no leaks have been established. But, dissolving in groundwater, carbon dioxide makes them slightly acidic, which allows the water to quickly dissolve the carbonate minerals that hold the sandstone together. So over time, the rock can loosen and release gas to the outside.

True, geophysicists emphasize that dissolution is "quick" on a geologic time scale, and the entire process can take thousands of years. However, the authors of the study recommend choosing carbon dioxide-free rocks or formations that are isolated from the surface by clay or shale.

Other interesting news:

▪ Rugged Smartphone Cat S32

▪ Robotic gardening system AlphaGarden

▪ Fujifilm returns to the black and white film market

▪ Childhood for testosterone

▪ Hexgears Hyeku F2 Mechanical Keyboard

News feed of science and technology, new electronics

 

Interesting materials of the Free Technical Library:

▪ section of the site Audio and video surveillance. Selection of articles

▪ article Judge not, lest you be judged. Popular expression

▪ article How did the 18th century chess computer work? Detailed answer

▪ article by Valerianella. Legends, cultivation, methods of application

▪ article Compact indicator of radioactivity. Encyclopedia of radio electronics and electrical engineering

▪ article The spectator draws cards conceived by others. Focus Secret

Leave your comment on this article:

Name:


Email (optional):


A comment:





All languages ​​of this page

Home page | Library | Articles | Website map | Site Reviews

www.diagram.com.ua

www.diagram.com.ua
2000-2024