Instruction on labor protection for the assistant foreman

Free technical library

OCCUPATIONAL SAFETY AND HEALTH
Free library / Occupational Safety and Health / Standard instructions for labor protection

Instruction on labor protection for the assistant foreman

Occupational Safety and Health

Occupational Safety and Health / Standard instructions for labor protection

Comments on the article

Safe Operation

1. General safety requirements

1.1. Persons not younger than 18 years of age who have passed a preliminary medical examination upon admission to work, as well as:

induction training;
unscheduled and targeted briefings;
fire safety briefing;
initial briefing at the workplace;
electrical safety training in the workplace.

1.2. The Assistant Master must:

undergo repeated training on labor safety at the workplace at least every three months;
pass a knowledge test on the rules for the design and safe operation of lifting mechanisms;
undergo a sanitary medical examination in accordance with the order of the Ministry of Health of the Russian Federation No. 90 dated March 14, 03.96;
perform only the work that is part of his duties;
use safe working methods;
comply with the requirements of prohibiting, warning, indicative and prescriptive signs and inscriptions, as well as signals given by train compilers, vehicle drivers;
be extremely careful in traffic areas.

1.3. The assistant master must know:

the impact on a person of dangerous and harmful production factors that arise during work;
general arrangement of braiding, winding machines, including ventilation systems;
arrangement and safe operation of lifting mechanisms;
requirements for industrial sanitation, electrical safety and fire safety;
location of first aid kits;
internal labor regulations established at the enterprise;
the requirements of this instruction, instructions on fire safety measures, instructions on electrical safety;
appointment of personal protective equipment;
rules and regulations on labor protection, safety and industrial sanitation;
be able to provide first aid to victims, use fire extinguishing equipment, call the fire brigade in the event of a fire.

Assistant foreman in the work must be guided by the requirements of this manual.

1.4. During work, the assistant foreman may be exposed to the following hazards:

objects and tools falling from a height;
increased temperature of washing solutions;
increased humidity and air mobility of the working area;
increased noise levels;
moving vehicles, mechanisms, rolling stock;
insufficient lighting at night.

1.5. The assistant master must use the following PPE: cotton suit, combined gloves, boots.

1.6. The assistant foreman must comply with the following fire safety requirements:

smoking only in designated areas;
do not approach the gas welding machine, gas cylinders of flammable liquids, gaseous liquids and containers with impregnating oil with an open flame;
do not touch oxygen cylinders with hands contaminated with oil;
know and be able to use primary fire extinguishing equipment.

1.6. Personal clothing and overalls must be stored separately in lockers and dressing rooms. It is prohibited to take work clothes outside the enterprise.

1.7. Eating should only be in canteens, buffets or specially designated rooms with appropriate equipment. Before eating, wash your hands thoroughly with soap and water.

1.8. For non-compliance with the safety requirements set forth in this manual, the assistant master is responsible in accordance with applicable law.

2. Safety requirements before starting work

2.1. Before starting work, the assistant master must:

put on the overalls and safety shoes that are required by the norms, put them in order;
tuck the loose ends of the clothes so that they do not hang down;
establish the sequence of operations;
inspect your workplace;
turn on the ventilation system;
check the presence of guards and safety devices;
check the availability and serviceability of tools, measuring instruments, templates, as well as their presence on racks and repair installations of spare parts and materials;
check the availability of fire fighting equipment;
check the serviceability of ladders, bridges, ensure their reliable installation;
make sure the workplace is well lit.

3. Safety requirements during work

3.1. Be careful while working.

3.2. Monitor the correct implementation of work methods by the staff of the kit.

3.3. Regularly and carefully carry out preventive inspection of machines.

3.4. Removal of machine guards must be carried out only with the machine stopped and the electric motor de-energized.

3.5. Use only designated lanes. Climbing over cars and crawling under them is prohibited.

3.6. When working together, coordinate their actions with the actions of other workers.

3.7. It is forbidden to inspect and repair electrical networks, electrical equipment and electrical installations, replace electric lamps, as well as touch live parts and bare wires.

3.8. When sharpening tools, use a protective shield or wear safety glasses.

3.9. When setting up and repairing machines:

stop the car, put up a poster on the starter "do not turn on - people are working";
carefully check the serviceability of individual parts;
do not leave protruding parts on open rotating parts;
carefully fasten the bolts.

3.10. The workplace and passages to it should be kept clean, not allowing them to be cluttered with spare parts removed from the car.

3.11. Cleaning material must be stored in metal boxes with tight-fitting lids.

3.12. Before using the ladders, make sure that they are in good condition, check for the presence of an inventory number on their bowstrings, the date of the next test, belonging to the workshop, the presence of tips and ties, and the absence of chips.

3.13. Before starting the machine, warn others with a prearranged signal.

4. Safety requirements in emergency situations

4.1. In the event of an emergency, the assistant foreman is obliged to stop work, immediately inform the foreman and then follow his commands.

4.3. When eliminating an emergency, it is necessary to act in accordance with the approved plan for eliminating accidents.

4.4. In the event of a fire that could lead to an explosion, you must:

notify the fire brigade immediately;
start extinguishing the fire;
organize the evacuation of people;
organize a meeting with the fire brigade.

In the event of an electrical fire, use only carbon dioxide or powder fire extinguishers.

4.5. If the insulation of electrical equipment is damaged, stop work, notify the master and resume work only after the damage has been eliminated.

4.6. In case of injury or illness, the locksmith must stop work, transfer duties to another person, notify the master and contact the first-aid post.

5. Safety requirements at the end of work

5.1. At the end of the work, the assistant master should:

tidy up the workplace and eliminate traces of spilled oil;
fold the tool, inventory and fixtures in a specially designated place;
collect used cleaning material in metal boxes with a tight-fitting lid;
take off your overalls and put them in the dressing room closet.

5.2. Wash contaminated clothing if necessary.

5.3. After work or in cases of contamination of body parts, take a shower.

5.4. The assistant foreman must inform the foreman about all violations of the production process.

We recommend interesting articles Section Standard instructions for labor protection:

▪ Safety diver. Standard instruction on labor protection

▪ Landing dangerous trees. Standard instruction on labor protection

▪ Cutter of veneer and facing materials on scissors. Standard instruction on labor protection

See other articles Section Standard instructions for labor protection.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Artificial leather for touch emulation 15.04.2024

In a modern technology world where distance is becoming increasingly commonplace, maintaining connection and a sense of closeness is important. Recent developments in artificial skin by German scientists from Saarland University represent a new era in virtual interactions. German researchers from Saarland University have developed ultra-thin films that can transmit the sensation of touch over a distance. This cutting-edge technology provides new opportunities for virtual communication, especially for those who find themselves far from their loved ones. The ultra-thin films developed by the researchers, just 50 micrometers thick, can be integrated into textiles and worn like a second skin. These films act as sensors that recognize tactile signals from mom or dad, and as actuators that transmit these movements to the baby. Parents' touch to the fabric activates sensors that react to pressure and deform the ultra-thin film. This ... >>

Petgugu Global cat litter 15.04.2024

Taking care of pets can often be a challenge, especially when it comes to keeping your home clean. A new interesting solution from the Petgugu Global startup has been presented, which will make life easier for cat owners and help them keep their home perfectly clean and tidy. Startup Petgugu Global has unveiled a unique cat toilet that can automatically flush feces, keeping your home clean and fresh. This innovative device is equipped with various smart sensors that monitor your pet's toilet activity and activate to automatically clean after use. The device connects to the sewer system and ensures efficient waste removal without the need for intervention from the owner. Additionally, the toilet has a large flushable storage capacity, making it ideal for multi-cat households. The Petgugu cat litter bowl is designed for use with water-soluble litters and offers a range of additional ... >>

The attractiveness of caring men 14.04.2024

The stereotype that women prefer "bad boys" has long been widespread. However, recent research conducted by British scientists from Monash University offers a new perspective on this issue. They looked at how women responded to men's emotional responsibility and willingness to help others. The study's findings could change our understanding of what makes men attractive to women. A study conducted by scientists from Monash University leads to new findings about men's attractiveness to women. In the experiment, women were shown photographs of men with brief stories about their behavior in various situations, including their reaction to an encounter with a homeless person. Some of the men ignored the homeless man, while others helped him, such as buying him food. A study found that men who showed empathy and kindness were more attractive to women compared to men who showed empathy and kindness. ... >>

Random news from the Archive

Flexible and elastic glass 12.03.2014

The US National Laboratory at Los Alamos, known for its central location in the US military nuclear program, has advanced in the development of flexible glass that can be used in mobile devices. The goal of the researchers was to create a "stretchy glass" that would bend when trying to deform or fall.

Scientists conditionally call their development "metallic" glass, since, like metals, it consists of partially structured groups of atoms, in contrast to ordinary (amorphous) glass, in which the atoms of its constituent substances are arranged randomly.

"Usually, plastic deformation leads to immediate glass failure," says Seth Imhoff of the Los Alamos lab. bending under force and then returning to its original shape.

As can be understood from the publication in Product Design And Development, the bending of "metallic" glass occurs on the scale of the so-called "shear bands" 10-20 nanometers in size. The addition of many bends in the nanoscale allows the effect of glass elasticity to appear on the macroscale.

Technology Business Research analyst Ezra Gottheil, commenting on the Los Alamos lab, says stretchable glass could be a big win for mobile device users: "These expensive toys are very vulnerable. Users would be happier if their phones and tablets were more durable. Sellers would have fewer sales but more satisfied customers."

Developers of "metal" glass from Los Alamos, along with other project participants from the universities of Wisconsin, Barcelona and Tohoku in Japan, believe that, in addition to creating flexible gadgets, it could find applications in sports, space technology, etc.

Other interesting news:

▪ High-speed remote radar-metal detector

▪ Optical fiber from food agar

▪ The use of graphene will become even more efficient

▪ Diode to protect high-speed interfaces from static electricity

▪ Cancer is preventable

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the site Experiments in chemistry. Article selection

▪ article Sources of pollution of the hydrosphere. Basics of safe life

▪ article How did the Inca Empire die? Detailed answer

▪ Skeleton Coast article. Nature miracle

▪ article VHF radio frequency synthesizer control unit. Encyclopedia of radio electronics and electrical engineering

▪ article Relay protection. General requirements. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews