OCCUPATIONAL SAFETY AND HEALTH
Instructions for labor protection when sorting round timber using an automated timber conveyor Occupational Safety and Health / Standard instructions for labor protection Safe Operation 1. General requirements for labor protection General labor protection requirements are set out in the instructions "General requirements for labor protection for workers engaged in logging and forestry work". 2. Labor protection requirements before starting work 2.1. Before starting work, the round timber stacker must:
2.2. All malfunctions that cannot be eliminated on their own should be reported to the master. It is not allowed to work on faulty equipment, faulty tools and on an unprepared and icy workplace not strewn with anti-slip materials. 3. Labor protection requirements during work 3.1. The employee must perform only the work that is entrusted to him by his immediate supervisor. 3.2. Before starting the timber conveyor, you must make sure that there are no people along its entire length and warn others about the start by giving a signal. 3.3. The alignment of the ends of the assortments in the forest stores should be carried out only when the timber conveyor is stopped. In this case, the stop of the timber conveyor by the stacker must be duplicated by the operator. The start of the timber conveyor must be carried out by the operator at the signal of the stacker who stopped the timber conveyor. 3.4. When maintaining the assortment, in order to exclude its premature dumping, it is not allowed to correct or level the assortment moving along the timber conveyor. 3.5. During the operation of the timber conveyor it is not allowed:
3.6. The operator is not allowed:
4. Labor protection requirements in emergency situations 4.1. At the stop signal, the operator or stacker must immediately stop the timber transporter, regardless of who gave this signal. 4.2. If it is necessary to eliminate a malfunction, carry out maintenance, clean debris and snow from the throwers, drive and tension stations, the upper and lower branches of the sorting timber conveyor, pedestrian flooring, bridges, stairs, forest storage, as well as in the event of people appearing in the danger zone, the operator or stacker must stop the sorting timber conveyor and turn off the main switch. 4.3. In case of failure of the automated control system for the dumpers, the stacker should reset the assortments in manual mode from the push-button control station. 4.4. The victim or eyewitness must notify the foreman or the appropriate work manager of each accident. 4.5. Each worker must be able to provide first aid. Assistance must be provided immediately at the scene of the incident. The first step is to eliminate the source of injury (turn off the engine, stop the mechanism, remove the victim from under the whip, etc.). The provision of assistance should begin with the most significant that threatens the health or life of a person: in case of severe bleeding, apply a tourniquet, and then bandage the wound; if a closed fracture is suspected, apply a splint; with open fractures, you should first bandage the wound, and then apply a splint; for burns, apply a dry bandage; in case of frostbite, gently rub the affected area using soft or fluffy tissues. If spinal injuries are suspected, the victim can only be transported in the supine position on a rigid base. After providing first aid, the victim should be sent to the nearest medical facility. 5. Labor protection requirements at the end of work 5.1. The operator must stop the timber conveyor, turn off the main switch, check the serviceability of the timber conveyor components, electrical equipment and the discharge control device. 5.2. Stackers must clean the workplaces, clean the timber conveyor and sidewalks from debris and other foreign objects, collect tools and take them to the place designated for this. 5.3. During the maintenance and cleaning of the timber conveyor, a sign must hang on the control panel with the inscription "Do not operate! Maintenance in progress!". 5.4. Any deficiencies in the field of labor protection must be reported to the foreman or the relevant work manager. We recommend interesting articles Section Standard instructions for labor protection: ▪ An employee who receives glassware from the public. Standard instruction on labor protection ▪ Plasterer. Standard instruction on labor protection ▪ Working on a cardboard cutter. Standard instruction on labor protection See other articles Section Standard instructions for labor protection. Read and write useful comments on this article. Latest news of science and technology, new electronics: Artificial leather for touch emulation
15.04.2024 Petgugu Global cat litter
15.04.2024 The attractiveness of caring men
14.04.2024
Other interesting news: ▪ Rare earths from the ocean floor ▪ Lamp on bioluminescent bacteria News feed of science and technology, new electronics
Interesting materials of the Free Technical Library: ▪ site section Low frequency amplifiers. Article selection ▪ article Without dogma. Popular expression ▪ article Have there been global warmings before? Detailed answer ▪ European olive article. Legends, cultivation, methods of application ▪ article Wayward map. Focus Secret
Leave your comment on this article: All languages of this page Home page | Library | Articles | Website map | Site Reviews www.diagram.com.ua |