Instruction on labor protection for a music director

Free technical library

OCCUPATIONAL SAFETY AND HEALTH
Free library / Occupational Safety and Health / Standard instructions for labor protection

Occupational safety instructions for the music director. Full Document

Occupational Safety and Health

Occupational Safety and Health / Standard instructions for labor protection

Comments on the article

Safe Operation

1. General requirements for labor protection

1.1. Persons at least 18 years of age who have undergone appropriate training, instructions on labor protection, medical examination and who have no contraindications for health reasons are allowed to work independently as a music director.

1.2. When working as a music director, comply with internal labor regulations and established work and rest schedules.

1.3. When conducting classes in a music room, workers and children may be exposed to the following hazardous factors:

impaired visual acuity in case of insufficient illumination of the music hall;
injuries when children fall during dance and other active activities;
electric shock when using faulty electrical sound-reproducing musical devices and instruments.

1.4. A room thermometer should be posted in the music room to monitor the temperature.

1.5. Employees are required to comply with fire safety rules, know the location of primary fire extinguishing equipment and the directions of evacuation in case of fire.

1.6. In case of an accident, immediately inform the administration of the institution.

1.7. In the process of work, observe the rules of personal hygiene, keep the workplace clean.

1.8. Persons who fail to comply with or violate labor safety instructions are subject to disciplinary action in accordance with internal labor regulations and, if necessary, are subject to an extraordinary test of their knowledge of labor safety norms and regulations.

2. Labor protection requirements before starting work

2.1. Turn on the lighting of the music room fully and make sure that the lamps are working properly. The lowest illumination should be: with fluorescent lamps, at least 200 lux (13 W/sq. m), with incandescent lamps, at least 100 lux (32 W/sq. m).

2.2. Make sure that the electrical equipment of the music room is working:

lamps must be securely suspended from the ceiling and have light-diffusing fittings;
switching boxes must be closed with lids, and electrical sockets must be closed with false plugs;
cases and covers of switches and sockets should not have cracks and chips, as well as bare contacts.

2.3. When using electric sound-reproducing musical devices and instruments in classes, make sure that they are in good working order and that the supply cables and electrical plugs are intact.

2.4. Check the sanitary condition of the music hall and ventilate it by opening windows or transoms and doors. The windows in the open position should be fixed with hooks, and the transoms should have stops. Finish ventilation in 30 minutes. before the children arrive.

2.5. Make sure that the air temperature in the music room is not lower than 19°C.

2.6. Make sure carpets and runners are securely fastened to the floor to prevent children from falling.

3. Labor protection requirements during work

3.1. Strictly observe the methodology for conducting music lessons.

3.2. Observe the established duration of the music lesson:

for younger and middle groups - 10-15 minutes;
for the senior group - 20-25 minutes;
for the preparatory group - 25-30 min.

3.3. During the lesson, maintain discipline and order, make sure that the children follow all the instructions of the music director and educator.

3.4. Do not allow children to leave the place of the lesson without permission.

3.5. When using electric sound-reproducing devices and instruments (tape recorder, player, TV, etc.) during a music lesson, follow the “Instructions on labor protection when using technical teaching aids.”

3.6. When the lid of a musical instrument (piano, piano, etc.) is raised, make sure that the lid rests securely and steadily on the stop, do not put your hands under the raised lid.

4. Labor protection requirements in emergency situations

4.1. If a fire occurs, immediately evacuate children from the music room, report the fire to the administration of the institution and the nearest fire department, and begin to extinguish the fire using primary fire extinguishing equipment.

4.2. In case of injury, provide first aid to the victim, if necessary, send him to the nearest medical institution and inform the administration of the institution.

4.3. In case of electric shock, turn off immediately. tension and if the victim has no breathing and pulse, give him artificial respiration or conduct an indirect (closed) heart massage until breathing and pulse are restored and send the victim to the nearest medical institution.

5. Labor protection requirements at the end of work

5.1. Switch off electrical sound-reproducing devices and instruments.

5.2. Remove inventory and equipment to designated area.

5.3. Ventilate the music room, close the windows, transoms and turn off the lights.

We recommend interesting articles Section Standard instructions for labor protection:

▪ Maintenance of PCM system equipment. Standard instruction on labor protection

▪ Work on a milling machine. Standard instruction on labor protection

▪ Work on the die-cutting press PVE-2 for cutting labels. Standard instruction on labor protection

See other articles Section Standard instructions for labor protection.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Artificial leather for touch emulation 15.04.2024

In a modern technology world where distance is becoming increasingly commonplace, maintaining connection and a sense of closeness is important. Recent developments in artificial skin by German scientists from Saarland University represent a new era in virtual interactions. German researchers from Saarland University have developed ultra-thin films that can transmit the sensation of touch over a distance. This cutting-edge technology provides new opportunities for virtual communication, especially for those who find themselves far from their loved ones. The ultra-thin films developed by the researchers, just 50 micrometers thick, can be integrated into textiles and worn like a second skin. These films act as sensors that recognize tactile signals from mom or dad, and as actuators that transmit these movements to the baby. Parents' touch to the fabric activates sensors that react to pressure and deform the ultra-thin film. This ... >>

Petgugu Global cat litter 15.04.2024

Taking care of pets can often be a challenge, especially when it comes to keeping your home clean. A new interesting solution from the Petgugu Global startup has been presented, which will make life easier for cat owners and help them keep their home perfectly clean and tidy. Startup Petgugu Global has unveiled a unique cat toilet that can automatically flush feces, keeping your home clean and fresh. This innovative device is equipped with various smart sensors that monitor your pet's toilet activity and activate to automatically clean after use. The device connects to the sewer system and ensures efficient waste removal without the need for intervention from the owner. Additionally, the toilet has a large flushable storage capacity, making it ideal for multi-cat households. The Petgugu cat litter bowl is designed for use with water-soluble litters and offers a range of additional ... >>

The attractiveness of caring men 14.04.2024

The stereotype that women prefer "bad boys" has long been widespread. However, recent research conducted by British scientists from Monash University offers a new perspective on this issue. They looked at how women responded to men's emotional responsibility and willingness to help others. The study's findings could change our understanding of what makes men attractive to women. A study conducted by scientists from Monash University leads to new findings about men's attractiveness to women. In the experiment, women were shown photographs of men with brief stories about their behavior in various situations, including their reaction to an encounter with a homeless person. Some of the men ignored the homeless man, while others helped him, such as buying him food. A study found that men who showed empathy and kindness were more attractive to women compared to men who showed empathy and kindness. ... >>

Random news from the Archive

Benefits of Brewing 01.07.2022

It turned out that beer is not only a revered drink and a way to express one's political position, but also a potential support for the environment, namely, an inexpensive way to remove lead from water. This conclusion was made by specialists from the Center for Bits and Atoms at the Massachusetts Institute of Technology (MIT).

In particular, scientists have found that inactive yeast can be an effective and inexpensive way to remove lead from drinking water sources.

Studies have shown that 1 gram of this yeast can remove up to 12 milligrams of lead in less than 5 minutes.

What's more, because the yeast cells used in this process are inactive and dry, they don't require much care, unlike living biomass, which requires nutrients and sunlight to keep the materials active.

Scientists have calculated that the waste yeast thrown away from one brewery, for example, in Boston (USA), is enough to clean the entire water supply of the city (with a population of almost 700 thousand people as of 2020).

At the same time, such a solution would not only purify the water necessary for the needs of the city, but would also solve the issue of waste disposal from the brewery.

The researchers note that the yeast, similar to removing lead, could also absorb other heavy metals in the water, such as cadmium and copper.

Other interesting news:

▪ Gamma rays preserve wood

▪ Panasonic is preparing to release an IP mobile phone

▪ Milk clothes

▪ 32-bit ARM Cortex-M7 processor for high performance microcontrollers

▪ ASUS Hyper M.2 X16 Card V2 Expansion Card

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the site Note to the student. Article selection

▪ article Legal and psychological foundations of self-defense. Basics of safe life

▪ article Under what conditions does an inverted rainbow occur? Detailed answer

▪ article Engineer of a drilling rig. Job description

▪ article Copper multi-band VHF antenna cactus. Encyclopedia of radio electronics and electrical engineering

▪ article Dismantling multi-terminal parts. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews