Labor protection instruction for the internal security guard

Free technical library

OCCUPATIONAL SAFETY AND HEALTH
Free library / Occupational Safety and Health / Standard instructions for labor protection

Labor protection instructions for internal security guards. Full document

Occupational Safety and Health

Occupational Safety and Health / Standard instructions for labor protection

Comments on the article

Safe Operation

1. General provisions

1.1. The instructions apply to all departments of the enterprise.

1.2. The instruction was developed on the basis of DNAOP 0.00-8.03-93 "Procedure for the development and approval by the owner of labor protection regulations in force at the enterprise", DNAOP 0.00-4.15-98 "Regulations on the development of labor protection instructions", DNAOP 0.00-4.12-99 " Model regulation on training on labor protection", SNiP III-4-80.

1.3. The instruction is valid for 3 years from the date of approval.

1.4. According to these instructions, the internal security guard (hereinafter referred to as the watchman) is instructed before starting work (initial briefing), and then every 6 months (repeated briefing).

The results of the briefing are recorded in the "Journal of registration of briefings on labor protection issues". After passing the briefing, the log must contain the signatures of the instructor and the watchman.

1.5. The owner must insure the caretaker against accidents and occupational diseases. In case of damage to the health of the caretaker through the fault of the owner, he (the caretaker) has the right to compensation for the harm caused to him.

1.6. For non-compliance with this instruction, the watchman bears disciplinary, financial, administrative and criminal liability.

1.7. Persons at least 18 years of age who have undergone a medical examination, introductory briefing on labor protection, briefing at the workplace and briefing on fire safety are allowed to work as a watchman.

1.8. The caretaker must:

1.8.1. Know the specifics of the enterprise; location of individual objects, sites, etc.

1.8.2. Comply with fire safety regulations.

1.8.3. Know the phone numbers for calling the fire department (01), police (02), ambulance (03), home phone number of the head of the enterprise, facility, site.

1.8.4. Know how to provide first aid to victims of accidents.

1.8.5. Have a first aid kit with the necessary medicines for first aid.

1.8.6. Comply with the internal labor regulations and in particular:

1.8.6.1. Do not touch electrical wires, fittings, general lighting, do not open the door of electrical cabinets.

1.8.6.2. On the territory of the enterprise, move only along paths, sidewalks, crossings specially designed for this, keeping to the right side.

1.8.6.3. Be attentive while on duty, do not engage in extraneous matters.

1.8.6.4. Do not turn on or turn off (except in an emergency) machines, machines, mechanisms.

2. Safety requirements before starting work

2.1. Accept the shift and sign in the shift acceptance-delivery journal.

2.2. Before acceptance, you must visually verify that there are no objects, fires, lying broken wires, etc. on the territory of the enterprise.

2.3. Check the alarm system, the availability of communication equipment, primary fire extinguishing, first aid equipment.

2.4. Make sure that lamps, heaters, other fire-hazardous devices are not turned on at the objects, areas, and the security and fire alarms are in good condition.

3. Safety requirements during work

3.1. Do not deviate from the route when inspecting objects, especially at night.

3.2. Do not use hand-made, open-coil heating devices, as well as electrical appliances that do not have instructions for use.

3.3. Do not repair electrical appliances and electric lighting; do not lift a broken electrical wire, do not touch a hanging wire.

3.4. Do not allow fires to be built on the protected object and near it.

3.5. Do not turn off signaling devices when the fire alarm is triggered.

3.6. The inclusion of household appliances in the electrical network is carried out using plug-in connections.

3.7. Do not come closer than 8-10 m to the electric wire lying on the ground.

3.8. When passing vehicles to the territory of the facility, you must be especially careful.

3.9. Gates for the passage of vehicles must be serviceable and equipped with latches.

3.10. When inspecting vehicles, one should not stand on their wheels; it is necessary to use portable ladders.

4. Safety requirements after finishing work

4.1. At the workplace, turn off all electrical appliances, local lighting, etc.

4.2. Tidy up the workplace, fold the documentation.

4.3. Make an entry in the change log.

4.4. Report to the manager and shift worker about all the shortcomings that occurred during the shift.

5. Safety requirements in an emergency

5.1. If possible, do not create panic, proceed to eliminate the emergency.

5.2. Keep unauthorized persons out of the danger zone.

5.3. Report what happened to your immediate supervisor.

5.4. If there are victims, it is necessary to provide them with first aid, and if necessary, call an ambulance.

5.5. Providing first aid.

5.5.1. Providing first aid in case of electric shock.

In case of electric shock, it is necessary to immediately release the victim from the action of electric current by disconnecting the electrical installation from the power source, and if it is impossible to disconnect it, pull it away from the conductive parts by clothing or using insulating material at hand.

If the victim has no breathing and pulse, it is necessary to give him artificial respiration and indirect (external) heart massage, paying attention to the pupils. Dilated pupils indicate a sharp deterioration in the blood circulation of the brain. In this state, the revival must begin immediately, and then call an "ambulance".

5.5.2. First aid for injury.

To provide first aid in case of injury, it is necessary to open an individual package, apply a sterile dressing material, which is placed in it, to the wound and tie it with a bandage.

If somehow the individual package was not found, then a clean handkerchief, a clean linen rag, etc. must be used for dressing. On a rag that is applied directly to the wound, it is advisable to drip a few drops of tincture of iodine to get a stain larger than the wound, and then apply the rag to the wound. It is especially important to apply the tincture of iodine in this way to contaminated wounds.

5.5.3. First aid for fractures, dislocations, shocks.

In case of fractures and dislocations of the limbs, it is necessary to strengthen the damaged limb with a splint, plywood plate, stick, cardboard or other similar object. The injured arm can also be hung with a bandage or handkerchief from the neck and bandaged to the torso.

In case of a skull fracture (unconsciousness after a blow to the head, bleeding from the ears or mouth), it is necessary to apply a cold object to the head (a heating pad with ice, snow or cold water) or make a cold lotion.

If a fracture of the spine is suspected, it is necessary to put the victim on the board, without lifting him, turn the victim on his stomach face down, while observing that the body does not bend, in order to avoid damage to the spinal cord.

In case of a fracture of the ribs, a sign of which is pain during breathing, coughing, sneezing, movements, it is necessary to tightly bandage the chest or pull it off with a towel during exhalation.

5.5.4. First aid for burns with acids and alkalis.

If acid or alkali gets on the skin, the damaged areas must be thoroughly rinsed with water for 15-20 minutes, after which the surface damaged by the acid should be washed with a 5% solution of baking soda, and the surface burned with alkali - with a 3% solution of boric acid or acetic acid solution.

If acid or alkali gets on the mucous membrane of the eyes, it is necessary to rinse the eyes thoroughly with a stream of water for 15-20 minutes, rinse with a 2% solution of baking soda, and rinse those burned with alkali with a 3% solution of boric acid or 3% solution of acetic acid.

In case of burns of the oral cavity with alkali, it is necessary to rinse with a 3% solution of acetic acid or 3% solution of boric acid, in case of burns with acid - with a 5% solution of baking soda.

If acid gets into the respiratory tract, you must breathe with a 10% solution of baking soda sprayed using a spray bottle; if alkali gets in, breathe with a sprayed 3% solution of acetic acid.

5.5.5. First aid for thermal burns.

In case of burns with fire, steam, hot objects, in no case should you open the formed blisters and bandage the burns with a bandage.

For first-degree burns (redness), the burned area is treated with cotton wool soaked in ethyl alcohol.

For second-degree burns (blisters), the burned area is treated with alcohol or a 3% manganese solution.

For third-degree burns (destruction of the skin tissue), the wound is covered with a sterile dressing and a doctor is called.

5.5.6. First aid for bleeding.

In order to stop bleeding, you must:

raise the injured limb up;
close the bleeding wound with a dressing (from a bag) folded into a ball, press it from above, without touching the wound itself, hold for 4-5 minutes. If the bleeding stops without removing the applied material, put another pad from another bag or a piece of cotton on top of it and bandage the wounded area (with some pressure);
in case of severe bleeding that cannot be stopped with a bandage, compression of the blood vessels that feed the wounded area is applied by bending the limb at the joints, as well as with fingers, a tourniquet or a clamp. In case of heavy bleeding, you should immediately call a doctor.

5.5.7. First aid for poisoning.

First aid for poisoning.

In case of gas poisoning, headache, "knocking in the temples", "ringing in the ears", general weakness, unconsciousness, palpitations, nausea, vomiting appear. With severe poisoning, drowsiness, apathy, indifference appear, and with severe poisoning - excited breathing, dilated pupils.

In case of all poisoning, the victim should be immediately removed or taken out of the gassed area, unbuttoned clothing that interferes with breathing, provide fresh air, lay the victim with his legs up, rub the body, cover it warmer, give ammonia to smell.

When breathing stops, begin artificial respiration.

In all cases of gas poisoning, it is necessary to give the victim to drink as much milk as possible.

5.6. If a fire occurs, start extinguishing with the available fire extinguishing equipment. If necessary, call the fire department.

5.6. Follow the instructions of the head of work to eliminate the emergency.

We recommend interesting articles Section Standard instructions for labor protection:

▪ Working with a kitchen stove. Standard instruction on labor protection

▪ Maintenance and repair of freon refrigeration units and equipment of refrigerated premises. Standard instruction on labor protection

▪ Feeder driver. Standard instruction on labor protection

See other articles Section Standard instructions for labor protection.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Artificial leather for touch emulation 15.04.2024

In a modern technology world where distance is becoming increasingly commonplace, maintaining connection and a sense of closeness is important. Recent developments in artificial skin by German scientists from Saarland University represent a new era in virtual interactions. German researchers from Saarland University have developed ultra-thin films that can transmit the sensation of touch over a distance. This cutting-edge technology provides new opportunities for virtual communication, especially for those who find themselves far from their loved ones. The ultra-thin films developed by the researchers, just 50 micrometers thick, can be integrated into textiles and worn like a second skin. These films act as sensors that recognize tactile signals from mom or dad, and as actuators that transmit these movements to the baby. Parents' touch to the fabric activates sensors that react to pressure and deform the ultra-thin film. This ... >>

Petgugu Global cat litter 15.04.2024

Taking care of pets can often be a challenge, especially when it comes to keeping your home clean. A new interesting solution from the Petgugu Global startup has been presented, which will make life easier for cat owners and help them keep their home perfectly clean and tidy. Startup Petgugu Global has unveiled a unique cat toilet that can automatically flush feces, keeping your home clean and fresh. This innovative device is equipped with various smart sensors that monitor your pet's toilet activity and activate to automatically clean after use. The device connects to the sewer system and ensures efficient waste removal without the need for intervention from the owner. Additionally, the toilet has a large flushable storage capacity, making it ideal for multi-cat households. The Petgugu cat litter bowl is designed for use with water-soluble litters and offers a range of additional ... >>

The attractiveness of caring men 14.04.2024

The stereotype that women prefer "bad boys" has long been widespread. However, recent research conducted by British scientists from Monash University offers a new perspective on this issue. They looked at how women responded to men's emotional responsibility and willingness to help others. The study's findings could change our understanding of what makes men attractive to women. A study conducted by scientists from Monash University leads to new findings about men's attractiveness to women. In the experiment, women were shown photographs of men with brief stories about their behavior in various situations, including their reaction to an encounter with a homeless person. Some of the men ignored the homeless man, while others helped him, such as buying him food. A study found that men who showed empathy and kindness were more attractive to women compared to men who showed empathy and kindness. ... >>

Random news from the Archive

Smartphone vibration motor for wiretapping 11.06.2016

Researchers from the University of Illinois at Urbana-Champaign (USA) have demonstrated the possibility of wiretapping conversations using a vibration motor that is present in every phone and smartphone and is designed to create vibration for incoming calls and messages, writes TechCrunch.

The vibration motor can be of two types - electromechanical or electromagnetic. Only the second type can be used for wiretapping.

An electromagnetic vibration motor is a coil of wire, inside of which there is a magnetic core. When an alternating electric current is applied to the winding, the core oscillates, creating vibration. Thus, electrical impulses are converted into mechanical motion. Speakers and headphones work the same way.

The microphone has a similar device. It consists, in fact, of the same parts, but in it the mechanical vibrations of the membrane are converted into electrical impulses. This fact allows some speakers to be used as a low quality microphone. Researchers have already tried this practice with a tiny electromagnetic vibration motor in a mobile device.

In their experiment, they used a Samsung Galaxy S3 smartphone with an electromagnetic vibration motor. But in order to successfully conduct the experiment, they needed to replace the control circuit for this motor with another one that they purchased at a regular radio parts store.

Other interesting news:

▪ Too much sun for Germany

▪ Charger for any portable devices

▪ Revealed the secret of tangling headphones

▪ Marvell IAP220 Single-Chip System for IoT and Wearable Electronics

▪ Flies are more dangerous than thought

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ site section Regulators of current, voltage, power. Article selection

▪ article Chewing gum for the eyes. Popular expression

▪ article How was pure crystalline iodine obtained for the first time? Detailed answer

▪ article Organization of the work of authorized (trusted) persons for labor protection

▪ Electrician's Toolkit article. Encyclopedia of radio electronics and electrical engineering

▪ article Telepathic gift. Focus Secret

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews