OCCUPATIONAL SAFETY AND HEALTH
Labor protection instruction for finishing operator. Full Document Occupational Safety and Health / Standard instructions for labor protection Safe Operation 1. General safety requirements 1.1. To work on the machine, workers who have passed the appropriate briefing at the workplace, are familiar with the operation and the basic rules of the machine, as well as the safety rules when working on this machine, are allowed. 2. Labor protection requirements before starting work 2.1. Tidy up your work clothes. Remove hair under a headdress, remove the ends. 2.2. Make sure that there is no gas pollution in the room (by smell). 2.3. Tidy up the workplace and make sure it is adequately lit and not cluttered. 2.4. Clean the equipment from fiber and fluff. 2.5. Make sure that the machine, its starting devices are in good condition, that guards and safety devices are in place and in good condition. 2.6. Check the serviceability and availability of grounding and the absence of bare wires. 2.7 Coordinate your actions with the actions of your partner. 2.8. Check the correct operation of the exhaust system. 2.9. Before starting the machine, warn others, make sure that the warning signal is heard and then start the machine. 3. Labor protection requirements during work 3.1. Be careful while working. 3.2. Do not touch moving or hot parts or the machine. 3.3. Do not brake the rotating parts of the machines with your hands or any objects. 3.4. Before lighting the burners, turn on the exhaust fans and ventilate the room for 10-15 minutes. 3.5. All oven doors must be tightly closed. 3.6. Prick the canvas on the needles of the leading chain slowly and without being distracted. 3.7. Do not open the drying chamber doors. 3.8. Do not open or remove guards while the machine is moving 3.8. Carry out cleaning and lubrication of the machine with the machine stopped and with the electric motors switched off. 3.10. After repair, do not start the gas installation of the machine without the permission of the master. 3.11. Do not leave a running gas appliance unattended. 4. Labor protection requirements at the end of work 4.1. Switch off the gas installation. 4.2. Close the burner taps and gas line taps, open the spark plug tap. 4.3. Turn off the electric motors of all fans, then turn off the main switch on the control panel. 4.4. Thoroughly clean the machine and clean the workplace, hand it over to the shifter and inform him of your comments and shortcomings during work. We recommend interesting articles Section Standard instructions for labor protection: ▪ Operation of safety ropes. Standard instruction on labor protection ▪ A food service worker at a healthcare facility. Standard instruction on labor protection ▪ Operation of Ya-1-OSV tanks. Standard instruction on labor protection See other articles Section Standard instructions for labor protection. Read and write useful comments on this article. Latest news of science and technology, new electronics: Artificial leather for touch emulation
15.04.2024 Petgugu Global cat litter
15.04.2024 The attractiveness of caring men
14.04.2024
Other interesting news: ▪ Camera with microlenses mimics eagle vision ▪ Australian city powered by solar energy ▪ Smallest 128Gb Flash Memory Chip ▪ Car camera in the license plate light ▪ Innovative Supplement for Astronauts News feed of science and technology, new electronics
Interesting materials of the Free Technical Library: ▪ site section Low frequency amplifiers. Article selection ▪ article For that guy. Popular expression ▪ article Which war formally lasted more than 2000 years? Detailed answer ▪ Article Sahara Desert. Nature miracle ▪ article Watches never lie. Focus Secret
Leave your comment on this article: All languages of this page Home page | Library | Articles | Website map | Site Reviews www.diagram.com.ua |