Labor protection instruction for a grinder

Free technical library

OCCUPATIONAL SAFETY AND HEALTH
Free library / Occupational Safety and Health / Standard instructions for labor protection

Instructions on labor protection for a grinder. Full document

Occupational Safety and Health

Occupational Safety and Health / Standard instructions for labor protection

Comments on the article

Safe Operation

1. General safety requirements

1.1. Individuals who have passed:

induction training;
fire safety briefing;
initial briefing at the workplace;
training in safe working methods and techniques for at least a 10-hour program (for work that is subject to increased safety requirements - a 20-hour program);
instructing on electrical safety at the workplace and checking the assimilation of its content.

1.2. The grinder must pass:

repeated briefing on labor safety at the workplace at least every three months;
unscheduled briefing: when changing the technological process or labor protection rules, replacing or modernizing production equipment, fixtures and tools, changing working conditions and organization, in case of violations of labor protection instructions, breaks in work for more than 60 calendar days (for work, to which are subject to increased security requirements - 30 calendar days);
dispensary medical examination - once every 2 years.

The grinder must:

comply with the internal labor regulations established at the enterprise;
comply with the requirements of this manual, fire safety instructions, electrical safety instructions;
comply with the requirements for the operation of equipment, including with a grinder;
use for its intended purpose and take care of the issued personal protective equipment.

1.3. The grinder must:

be able to provide first (pre-medical) assistance to the victim in an accident;
know the location of first aid, primary fire extinguishing equipment, main and emergency exits, evacuation routes in case of an accident or fire;
perform only the assigned work and not transfer it to others without the permission of the foreman or head of the workshop;
during work, be attentive, not be distracted and not distract others, do not allow persons who are not related to work to the workplace;
keep the workplace clean and tidy.

1.4. The locksmith-grinder must know and follow the rules of personal hygiene. Eat, smoke, rest only in specially designated areas and places. Drink water only from specially designed installations.

1.5. If any malfunctions of equipment, fixtures, tools and other shortcomings or hazards are found in the workplace, immediately inform the foreman or head of the workshop. work can only be started with their permission after the elimination of all deficiencies.

1.6. If a fire is detected or in the event of a fire:

turn off the equipment;
inform the fire brigade and administration;
start extinguishing the fire with the primary fire extinguishing equipment available in the workshop in accordance with the fire safety instructions.

In case of a threat to life - leave the premises.

1.8. In case of an accident, provide the victim with first (pre-medical) aid, immediately report the incident to the foreman or head of the workshop, take measures to preserve the situation of the incident (equipment condition), if this does not create a danger to others.

1.9. For non-compliance with the safety requirements set forth in this manual, the worker is liable in accordance with applicable law.

1.10. In accordance with the "Model Industry Standards for the Free Issue of Special Clothing, Special Footwear and Other Personal Protective Equipment to Workers and Employees", a locksmith-grinder is entitled to: a cotton suit for 12 months, combined gloves, goggles.

1.11. The main hazardous and harmful production factors under certain circumstances can be:

elements of production equipment;
faulty working tool;
flying particles of metal, abrasive wheel;
electric current;
industrial dust;
industrial noise.

2. Safety requirements before starting work

2.1. Make sure that it is in good condition and put on overalls, remove your hair under a beret or cap.

2.2. Check your workplace (the workplace of a grinder is: a place for welding stainless steel products, a workbench), it must be evenly lit (without glare), not cluttered with foreign objects.

2.3. Check the serviceability of the tool (grinding machine) and fixtures:

the condition of the wire, the integrity of the insulation, the absence of a break in the cores;
serviceability of the plug connection;
that the body of the power tool is grounded;
by external inspection, make sure that the grinding wheel is in good condition;
the presence of a protective cover;
the handle of a percussion instrument (hammer, etc.) must be oval in cross section and straight;
the surface of the hammer head must be convex, smooth, not beveled, without burrs;
impact tools (chisels, crosscuts, barbs, etc.) must have a smooth occipital part without cracks, burrs, work hardening and bevels.

2.4. If it is necessary to use a portable lamp, check: the presence of a protective grid, the serviceability of the cord and insulating tube, the serviceability of the socket and plug. The voltage of portable lamps should not exceed 42 V. It is not recommended to use self-made portable lamps.

3. Safety requirements during work

3.1. When using a grinding tool, a grinder is prohibited from:

disassemble the tool and make any repairs to the tool itself;
hold the cord of a power tool or touch a rotating tool;
transfer the tool, even if only for a short time, to other persons.

3.2. Adjustment and repair of the grinder can only be done when it is completely stopped.

3.3. In case of interruptions in work, breakage of the electrical wire and any kind of malfunction, immediately disconnect the grinder from the mains.

3.4. When using a workbench, lay only those parts and tools that are necessary for this work.

3.5. On the left side of the vise, a tool is placed on the workbench, which is taken with the left hand, and on the right - a tool that is taken with the right hand (hammer, file, wrenches, etc.), in the middle of the workbench - a measuring tool.

3.6. For convenience and to avoid microtrauma, the bench vice should be installed so that the upper part of the jaws is at the level of the locksmith's elbow.

3.7. Perform work on metalworking of metals only after they are securely fixed in a vice in order to avoid falling and injuring workers.

3.8. Sweep away dust and shavings from the workbench with a brush. Do not blow off dust and chips with compressed air, mouth, or remove dust and chips with bare hands to avoid injury to eyes and hands.

3.9. When cutting, riveting, chasing and other work in which the formation of flying metal particles is possible, you should use goggles or a mask with safety glasses, and protect the place of work with portable shields, nets so that people working or passing by do not get injured.

3.10. For safety reasons, metal dressing should be done with gloves.

3.11. Performing work jointly with several persons, coordinate their actions with the actions of other workers.

3.12. Do not touch the current-carrying parts of the equipment, electrical distribution boards, cabinets, general lighting fittings; do not step on portable electrical wires, hoses lying on the floor.

3.13. If the electrical equipment is faulty, call an electrician.

4. Safety requirements in emergency situations

4.1. In the event of a malfunction of the tool (strong noise, vibration, sparking on the body, smell of smoke), turn off the tool immediately and inform the master about it. Put the tool in storage.

5. Safety requirements at the end of work

4.1. Tidy up your workspace. Remove tools, attachments and lubricants to the place provided for them. Rags and flammable materials, in order to avoid spontaneous combustion, put in metal boxes with tight lids.

4.2. Inform the foreman about all the shortcomings that occurred during the work, and about the measures taken to eliminate them.

4.3. Take off overalls, put them in a closet, wash your hands and face with soap, take a shower if possible, and do not use chemicals for washing.

We recommend interesting articles Section Standard instructions for labor protection:

▪ Electrician for the repair and maintenance of cranes. Standard instruction on labor protection

▪ Locksmith dismantling and assembly work. Standard instruction on labor protection

▪ Hot work at gas stations. Standard instruction on labor protection

See other articles Section Standard instructions for labor protection.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Artificial leather for touch emulation 15.04.2024

In a modern technology world where distance is becoming increasingly commonplace, maintaining connection and a sense of closeness is important. Recent developments in artificial skin by German scientists from Saarland University represent a new era in virtual interactions. German researchers from Saarland University have developed ultra-thin films that can transmit the sensation of touch over a distance. This cutting-edge technology provides new opportunities for virtual communication, especially for those who find themselves far from their loved ones. The ultra-thin films developed by the researchers, just 50 micrometers thick, can be integrated into textiles and worn like a second skin. These films act as sensors that recognize tactile signals from mom or dad, and as actuators that transmit these movements to the baby. Parents' touch to the fabric activates sensors that react to pressure and deform the ultra-thin film. This ... >>

Petgugu Global cat litter 15.04.2024

Taking care of pets can often be a challenge, especially when it comes to keeping your home clean. A new interesting solution from the Petgugu Global startup has been presented, which will make life easier for cat owners and help them keep their home perfectly clean and tidy. Startup Petgugu Global has unveiled a unique cat toilet that can automatically flush feces, keeping your home clean and fresh. This innovative device is equipped with various smart sensors that monitor your pet's toilet activity and activate to automatically clean after use. The device connects to the sewer system and ensures efficient waste removal without the need for intervention from the owner. Additionally, the toilet has a large flushable storage capacity, making it ideal for multi-cat households. The Petgugu cat litter bowl is designed for use with water-soluble litters and offers a range of additional ... >>

The attractiveness of caring men 14.04.2024

The stereotype that women prefer "bad boys" has long been widespread. However, recent research conducted by British scientists from Monash University offers a new perspective on this issue. They looked at how women responded to men's emotional responsibility and willingness to help others. The study's findings could change our understanding of what makes men attractive to women. A study conducted by scientists from Monash University leads to new findings about men's attractiveness to women. In the experiment, women were shown photographs of men with brief stories about their behavior in various situations, including their reaction to an encounter with a homeless person. Some of the men ignored the homeless man, while others helped him, such as buying him food. A study found that men who showed empathy and kindness were more attractive to women compared to men who showed empathy and kindness. ... >>

Random news from the Archive

Thanks to NXP, smart chips have halved their weight 31.12.2006

NXP Semiconductors announced the start of mass deliveries of ultra-thin ICs (integrated circuits) for smart cards. They are thinner than the diameter of a human hair.

NXP's new SmartMX family of chips, specifically designed for smart cards, are less than 75 microns thick, which is 2 times thinner than standard chips currently being produced. Due to their miniaturization, the new chips allow more flexible design decisions and provide greater protection from environmental factors.

The new 75 µm wafers will be incorporated into MOV6 contactless IC chip packages used in ePassports, eVisas and other electronic documents. With a thickness of only 260 microns, MOV6 is 20% thinner than other brands on the market.

Other interesting news:

▪ Biobank for storing living brain samples

▪ Sunscreen for astronauts

▪ Hearing genes in plants

▪ OWC Mercury Elite Pro Dual 10TB External Drives

▪ Classroom with variable lighting

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ website section Television. Article selection

▪ article Someone said something or it seemed to me? Popular expression

▪ article How does the snail fool the crow in a Japanese tale reminiscent of the fable of the crow and the fox? Detailed answer

▪ article Eucalyptus round. Legends, cultivation, methods of application

▪ article Capacitance and inductance meter. Encyclopedia of radio electronics and electrical engineering

▪ article Smart magnetic goose. physical experiment

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews