Job description for an electromechanic

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for an electromechanic. Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The electrician belongs to the category of specialists.
A person who has a higher professional (technical) education and at least 6 months of experience as an electrician of the highest category or a secondary vocational (technical) education and at least 2 years of experience as an electrician of the highest category is appointed to the position of an electrician.
Appointment to a position and dismissal from it is carried out by order of the director of the enterprise upon presentation (the head of the relevant structural unit; other official).
The electrician reports directly to _______.
The electrician must know:

orders, directives, instructions, instructions and other normative and administrative documents regulating the work of an electrician;
device, principle of operation, technical characteristics and design features of instruments and equipment;
rules and procedure for testing devices and electrical measurements;
characteristic types of damage and ways to eliminate them;
organization and technology of electrical work;
the procedure for drawing up schematic diagrams for new models of devices and equipment;
fundamentals of electrical engineering, radio engineering, telemechanics; best practices in the operation, repair and maintenance of devices and equipment;
consumption rates of materials, spare parts and electricity;
fundamentals of economics, organization of production, labor and management;
fundamentals of labor legislation;
rules of internal labor regulations;
rules and norms of labor protection, safety measures, industrial sanitation and fire safety.

During the absence of an electrician (illness, vacation, etc.), his duties are performed by a person appointed in the prescribed manner. This person acquires the appropriate rights and is responsible for the proper performance of the duties assigned to him.

II. Official duties

Electrician:

Ensures good condition, trouble-free and reliable operation of serviced devices and equipment, their correct operation, timely high-quality repair and modernization in accordance with maintenance instructions, approved drawings and diagrams, current technical conditions and standards.
It studies the operating conditions of devices, identifies the causes of premature wear, and takes measures to prevent and eliminate them.
Instructs workers using these devices on the rules for their operation.
Supervises the work of electricians, controls the quality of their work, compliance with technology, safety rules, labor protection, industrial sanitation and fire safety.
Participates in the elimination of malfunctions in the operation of devices, their repair, installation and adjustment, electrical measurements and tests.
Provides jobs with materials, raw materials, spare parts, measuring instruments, protective equipment, tools and devices, technical documentation.
Masters and implements progressive methods of maintenance, repair, installation and other work on a fixed type of device.
Takes part in the development of measures to improve the reliability, quality of work of fixed technical means, in the development and modernization of existing devices.
Participates in the preparation of applications for materials, spare parts, tools and ensures their economical and rational use.
Participates in the investigation of the causes of equipment damage and the development of measures to prevent accidents and industrial injuries.

III. Rights

The electrician has the right:

Get acquainted with the draft decisions of the management of the enterprise relating to its activities.
Submit proposals for the management to improve the work related to the duties provided for in this job description.
Notify the immediate supervisor of all shortcomings in the production activities of the enterprise (its structural divisions) identified in the course of the performance of their duties and make proposals for their elimination.
Request personally or on behalf of the immediate supervisor from the heads of enterprise departments and specialists information and documents necessary for the performance of his duties.
Involve specialists from all (individual) structural divisions in solving the tasks assigned to him (if this is provided for by the regulations on structural divisions, if not, then with the permission of the management).
Require the management of the enterprise to assist in the performance of his duties and rights.

IV. A responsibility

The electrician is responsible for:

For improper performance or non-performance of their official duties provided for by this Job Description - within the limits determined by the current labor legislation of Ukraine.
For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine.
For causing material damage - within the limits determined by the current labor and civil legislation of Ukraine.

We recommend interesting articles Section Job descriptions:

▪ Instructor-methodologist in industrial gymnastics. Job description

▪ First Vice-Rector (Vice-Rector for Teaching and Educational Work) of the Higher

▪ Head of the rental department. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

DeLorean will be produced again 28.01.2016

The DeLorean Motor Company has announced news that will please fans of the fantastic trilogy "Back to the Future": the production of the DeLorean DMC-12, in which Marty McFly and Doc Brown traveled through time, will be resumed.

DeLorean DMC-12, or simply DeLorean, was produced from 1981 to 1983. Distinctive features of this model are gull-wing doors and a frame body made of composite, glued on the outside with sheets of unpainted stainless steel 1 mm thick. It was these details that gave the car a recognizable look, but participation in the cult trilogy "Back to the Future", in fact, turned the DeLorean into a legend.

Alas, the build quality of the cars left much to be desired. Sales did not live up to the creators' expectations, and the warehouses were overcrowded. The debts accumulated during the low-quality assembly and the lost credibility led to bankruptcy. As a result, the founder of the DeLorean Motor Company, John DeLorean, was arrested by the FBI in 1982 on a fabricated case of selling a consignment of cocaine. Later he was found not guilty, but it was no longer possible to save DMC-12 - the banks refused loans to Mr. DeLorean, and the government stopped funding.

And now it is reported that the US authorities have given the green light to the small-scale production of a replica of the legendary DeLorean. The body of the car is planned to be manufactured according to the original project using the same parts as in the 80s of the last century.

As for the "stuffing" of the car, it will undergo changes. In particular, modern electronics and new security systems will be used. DeLorean will also receive a new engine, which, according to unofficial information, will be able to produce up to 400 horsepower.

The release of the "car of the future" is planned to be organized in early 2017. In total, about 300 cars will enter the market at a price of "no more than 100 thousand US dollars." By comparison, refurbished DeLoreans are now available for between $45 and $55.

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the site The most important scientific discoveries. Article selection

▪ article And I, for songs and for a dream, do not need a million. Popular expression

▪ article Which country tried to prevent the development of color television due to fears of social stratification? Detailed answer

▪ Anemone article. Legends, cultivation, methods of application

▪ article Acoustic system with a double head. Encyclopedia of radio electronics and electrical engineering

▪ article The principle of operation of GSM-networks. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews