Job description for a technologist

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for process technician. Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

Technician-technologist belongs to the category of specialists.
For the position:

a technologist is appointed by a person who has a secondary vocational (technical) education without any work experience requirements;
Technician-technologist of category II - a person with secondary vocational (technical) education and work experience in the position of technician or other positions filled by specialists with secondary vocational education for at least 2 years;
Technician-technologist of category I - a person with secondary vocational (technical) education and work experience as a technician of category II for at least 2 years.

Appointment to the position of process technician and dismissal from it are made by order of the director of the enterprise.
The technologist must know:

Unified system of technological preparation of production;
standards, specifications and other regulatory and guidance materials for the design, development and execution of technological documentation;
the design of the product or the composition of the product for which the technological process or production mode is being developed;
technical characteristics of the designed object and requirements for it;
production technology of products manufactured by the enterprise;
the main technological equipment of the enterprise and the principles of its operation;
typical technological processes and production modes;
methods for conducting patent research;
basic requirements for the organization of labor in the design of technological processes and equipment;
fundamentals of economics, organization of labor and organization of production;
fundamentals of labor legislation;
rules and regulations of labor protection.

During the absence of a process technician (illness, vacation, etc.), his duties are performed by a person appointed by order of the director of the enterprise. This person acquires the corresponding rights and is responsible for the proper performance of the duties assigned to him.

II. Official duties

Technologist:

Under the guidance of a more qualified specialist, develops progressive technological processes and optimal production modes for simple types of products or their elements, ensuring compliance of the developed projects with technical specifications and current regulatory documents for design, maintaining high quality of products, reducing material and labor costs for their production.
Establishes a step-by-step route for processing parts and assembling products during their manufacturing and control over all operations of the technological sequence.
Draws up process maps, route and material maps, equipment lists and other technological documentation.
Participates in conducting patent research and determining indicators of the technical level of designed equipment and technology, in drawing up technical specifications for the design of devices, equipment and special tools provided for by the developed technology, in introducing technological processes in workshops, in identifying the causes of products, in preparing proposals for its prevention and elimination.
Draws up changes in technical documentation in connection with adjustments to technological processes and production modes and coordinates them with the departments of the enterprise.
Takes part in the development of technically sound time (output) standards, calculates detailed and operational material standards, consumption rates of raw materials, materials, tools, fuel and energy, and the economic efficiency of the designed technological processes.
Monitors compliance with technological discipline in the production departments of the enterprise and the rules of equipment operation.
Participates in testing of technological equipment, in conducting experimental work to verify and master the designed technological processes and production modes.
Performs individual official assignments of his immediate supervisor.

III. Rights

The technologist has the right:

Get acquainted with the draft decisions of the management of the enterprise relating to its activities.
Submit proposals for the management to improve the work related to the duties provided for in this job description.
Notify the immediate supervisor of all shortcomings in the production activities of the enterprise (its structural divisions) identified in the course of the performance of their duties and make proposals for their elimination.
Request personally or on behalf of the immediate supervisor from the heads of enterprise departments and specialists information and documents necessary for the performance of his duties.
Involve specialists from all (individual) structural divisions in solving the tasks assigned to him (if this is provided for by the regulations on structural divisions, if not, then with the permission of the management).
Require the management of the enterprise to assist in the performance of his duties and rights.

IV. A responsibility

The Technician is responsible for:

For improper performance or non-performance of their official duties provided for by this Job Description - within the limits determined by the current labor legislation of Ukraine.
For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine.
For causing material damage - within the limits determined by the current labor and civil legislation of Ukraine.

We recommend interesting articles Section Job descriptions:

▪ Coastal sailor. Job description

▪ Hematologist. Job description

▪ Equipment conveyor line operator. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

New tape density record 19.04.2015

IBM Research has developed a technology for recording data on the surface of a linear magnetic tape, providing a record density of 123 billion bits per square inch without compression. This density corresponds to 220 TB in a standard ribbon cartridge that fits easily in the palm of your hand.

Magnetic tape has traditionally been used to archive information and store backup copies of data. Coughlin Associates estimates that over 500 exabytes of data is stored on tape today. IBM launched its first commercial product in this category almost 60 years ago. At that time, the capacity of the reel of the 726 Magnetic Tape Unit with a half-inch wide magnetic tape was about 2 MB, that is, during the specified period, the capacity of the media was increased by 110 million times. Let's clarify that 220 TB cartridges are not yet available and we are talking about a comparison with a potentially possible volume indicator. One way or another, the achievement of IBM Research engineers proves that tape technology continues to be relevant.

A record-breaking result was obtained using a magnetic tape prototype developed jointly with Fujifilm. Recall that a year ago, partners achieved an indicator of 85,9 billion bits per square inch.

The manufacturer notes that technologies that are being developed to achieve record data density are later implemented in serial IBM products.

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ site section Computer devices. Article selection

▪ article Fragments of old generations. Popular expression

▪ article What are catacombs? Detailed answer

▪ article Head of the medical center. Job description

▪ article TTL signal transmitter. Encyclopedia of radio electronics and electrical engineering

▪ Article Flowers that change color. Focus Secret

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews