Job description for the operator of the equipment conveyor line

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for the operator of the conveyor line equipment. Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The equipment conveyor line operator reports directly to _______.
The operator of the equipment conveyor line follows the instructions of _______.
The equipment conveyor line operator replaces _______.
The operator of the conveyor line of equipment is replaced by _______.
The operator of the equipment conveyor line is appointed to the position and dismissed by the head of the department in agreement with the head of the department.
Must know:

installation of fiber settling and polymerization chambers, dust collection installations, conveyor wet cleaning systems, fiber settling chambers;
technological process of mineral wool production;
requirements for fiber, bundle, carpet;
blocking system, signaling, order of putting into operation of the production line, readjustment and stop of all units and mechanisms;
product range;
rules for the operation of gas facilities.

II. Official duties

The operator of the conveyor line of equipment performs the following job responsibilities:

Conducting the process of production of mineral wool boards, shells, blanks for winding cylinders on a conveyor line installed in a stream with a fiber deposition chamber.
Monitoring the progress of the carpet from the fiber deposition chamber.
Adjustment of carpet thickness and binder supply.
Production line speed control, mineral fiber quality control.
Monitoring the operation of fans, smoke exhausters, their start and stop.
Starting, running and stopping the dust collection system.
Monitoring of instrumentation, coolant temperature, compliance with the heat treatment regime.
Monitoring the operation of circulation, suction fans, fans of the cooling zone.
Power supply to the control panel.
Starting, stopping and monitoring the operation of granulators, shredders, a fan for feeding waste into the fiber settling chamber.
Observation of the technological scheme of the operation of the equipment.

III. Rights

The operator of the equipment conveyor line has the right to:

give assignments to subordinate employees, tasks on a range of issues included in his functional duties;
control the fulfillment of production tasks, the timely execution of individual orders by employees subordinate to him;
to request and receive the necessary materials and documents related to the issues of their activities and activities of employees subordinate to him;
interact with other services of the enterprise on production and other issues that are part of its functional duties;
get acquainted with the draft decisions of the company's management regarding the activities of the Division;
propose for consideration by the manager proposals for improving the work related to the duties provided for in this Job Description;
submit for consideration by the head of the proposal on the promotion of distinguished employees, the imposition of penalties on violators of production and labor discipline;
report to the manager on all identified violations and shortcomings in connection with the work performed.

IV. A responsibility

The equipment conveyor line operator is responsible for:

For failure to perform (improper performance) of their official duties provided for by this Job Description, within the limits determined by the current labor legislation of Ukraine.
For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine.
For causing material damage - within the limits determined by the current labor, criminal and civil legislation of Ukraine.

We recommend interesting articles Section Job descriptions:

▪ Television electrician. Job description

▪ Transportation manager. Job description

▪ Manufacturer of natural sausage casing. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

The ability to concentrate is more important than the amount of memory 20.10.2020

Scientists from the Ural Federal University, together with colleagues from the Institute of Medical Psychology of the University of Tübingen (Germany), found out that work efficiency depends on a person's attention, and not on the amount of his memory.

The ability to structure information, manipulate it and mentally return to the necessary components affects the performance of working memory more than the ability to keep many tasks in the head.

Most real-life working memory tasks require both short-term storage and execution components. For example, remembering a phone number before dialing it requires converting verbal information into a sequence of button presses. The task also involves switching attention between the current number to be dialed and pressing the buttons on the phone panel. A more complex example is transforming a shopping list into an optimal shopping path. This task, in addition to translating a list into a sequence of spatial locations, also involves constantly updating information in working memory.

The main task of working memory is to store information and manage it in the short term. It consists of components such as "capacity" for short-term storage of memory contents and executive components that are responsible for controlling attention, processing and reorganizing or manipulating information in short-term storage. This is what distinguishes working memory from short-term memory.

In their study, the researchers observed a correlation between the ability to store information short-term and the ability to focus on this information in subjects. Participants had to perform above-average tasks so that the researchers could determine what signals the brain was giving. Some tasks required only the storage of information, others - storage and mental manipulation. The study of theta and beta components showed that the functioning of working memory is affected not only by external distractions, but also by the number of items stored in working memory and the presence of simultaneous tasks. The executive component of working memory is needed when the load on it is high or manipulations are needed. In these cases, the execution component helps the memory cope with interference.

According to scientists, people with higher efficiency are more prone to resist interference. This means that the ability to control attention plays a more important role in individual differences in working memory than short-term storage capacity.

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ Telephony site section. Article selection

▪ article So louder, music, play victory! We have won, and the enemy is running, running, running! Popular expression

▪ article What is reincarnation? Detailed answer

▪ article Assistant printer offset machine. Job description

▪ article Modernizing a six-string guitar. Encyclopedia of radio electronics and electrical engineering

▪ article Commutator for water pump and valve. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews