Job description for the operator of fiberization installations

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for the operator of fiberization installations. Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The fiberization plant operator reports directly to _______.
The fiberizing plant operator follows the instructions of _______.
The fiberization plant operator replaces _______.
The fiberization plant operator is replaced by _______.
The operator of fiberization installations is appointed to the position and dismissed by the head of the department in agreement with the head of the department.
Must know:

installation of multi-roll centrifuges, spinneret-blowing installations, related equipment and instrumentation;
technological process of mineral wool production;
requirements for melt, mineral wool fiber, binder, bonded carpet;
blocking system, alarm;
the procedure for starting, readjusting, stopping all units and mechanisms;
air supply scheme, bundles;
location and purpose of reinforcement;
methods for visual determination of the temperature and viscosity of the melt.

II. Official duties

The operator of fiberization installations performs the following job responsibilities:

Conducting the process of obtaining mineral wool fiber on multi-roll centrifuges and spunbond machines.
Preparation of spunbond feeders for work.
Start, control, stop of centrifuges, exhaust fans and other equipment.
Regulation of the melt jet supply, roll cooling, hollow rolls, feeder heating, carpet uniformity, bond supply and deduster.
Change of feeders, nozzles, ceramics, notches, trays.
Rollback and installation of centrifuges.
Troubleshooting equipment.

III. Rights

The fiberization plant operator has the right to:

give assignments to subordinate employees, tasks on a range of issues included in his functional duties;
control the fulfillment of production tasks, the timely execution of individual orders by employees subordinate to him;
to request and receive the necessary materials and documents related to the issues of their activities and activities of employees subordinate to him;
interact with other services of the enterprise on production and other issues that are part of its functional duties;
get acquainted with the draft decisions of the company's management regarding the activities of the Division;
propose for consideration by the manager proposals for improving the work related to the duties provided for in this Job Description;
submit for consideration by the head of the proposal on the promotion of distinguished employees, the imposition of penalties on violators of production and labor discipline;
report to the manager on all identified violations and shortcomings in connection with the work performed.

IV. A responsibility

The fiberization plant operator is responsible for:

For failure to perform (improper performance) of their official duties provided for by this Job Description, within the limits determined by the current labor legislation of Ukraine.
For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine.
For causing material damage - within the limits determined by the current labor, criminal and civil legislation of Ukraine.

We recommend interesting articles Section Job descriptions:

▪ Selector of reference and informational material. Job description

▪ Chemist-expert of a healthcare institution. Job description

▪ Economist for contract and claims work. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

High Speed NFC Memory ST25DV 28.04.2018

A new series of ST2DV wireless NFC / I25C memory chips from STMicroelectronics complies with ISO15693 and NFC Type 5 standards. The main feature of the ST25DV is the Fast data transfer mode, which is implemented through an internal buffer of 256 bytes of RAM (Mailbox).

The microchip can be used both as a conventional dynamic NFC tag (NFC TAG, NDEF message support) and as an interface for wirelessly updating the firmware of the final product via the RFID protocol. In the latter version, it is the high-speed exchange mode that can significantly reduce the firmware download time. In a real experiment, it took about 32 seconds to load an image for STM405F110 with a size of 45 kb.

There are several variants of ST25DV04K, ST25DV16K and ST25DV64K chips available, with EEPROM memory capacity of 4/16/64 Kbps, respectively. Through the I?C interface, microcircuits can work with any microcontroller with a constant power supply. It is possible to interact with the ST25DV via the air interface even without power supply - the microcircuit receives energy for writing and reading data from the electromagnetic field of the reader. If necessary, the radio interface can be disabled via I?C. The internal EEPROM memory can be divided into 4 flexible areas with 64-bit password protection. The microcircuit can interact with both NFC-compatible smartphones and specialized 13,56 MHz RFID readers.

A separate GPO pin on the chip can inform the host of various events, such as RF field detection, air interface activity, or the availability of a message in Mailbox. Under certain conditions, the ST25DV implements Energy Harvesting technology, allowing the connected external circuitry to be powered by the energy of the RFID reader.

ST25DV NFC memory features:

Dynamic NFC tag ISO15693 and NFC Type 5;
Range up to 1 meter;
Capacity 1,2 and 8 kilobytes;
Password protection 64 bit;
Proprietary speed mode up to 53 Kbps;
1 million EEPROM write cycles;
Data storage up to 40 years;
Temperature range -40...125°C (SO8N and TSSOP8).

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ site section Clocks, timers, relays, load switches. Article selection

▪ article Go for broke. Popular expression

▪ article What is magnesium? Detailed answer

▪ article Manufacture of the case. HAM Tips

▪ article Electronic accessories on the microcontroller for the game STALKER. Encyclopedia of radio electronics and electrical engineering

▪ article Repeating malfunction of the GRUNDIG-GR1450 TV. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews