Job description for a refrigeration engineer

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for the driver of refrigeration units. Full Document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The refrigeration engineer reports directly to _______.
The refrigeration engineer follows the instructions of _______.
The refrigeration engineer replaces _______
The refrigeration engineer is replaced by _______.
Upon transfer to another job or dismissal from the post, the Refrigeration Engineer is responsible for the proper and timely handover of cases to the person taking up this position, and in the absence of such, to the person replacing him or directly to his supervisor.
Must know:

constructive arrangement of refrigeration units of various systems;
basic laws of physics regarding the refrigeration process;
layout of pipelines, fittings, automatic control devices and control devices;
technological process of cold production and efficiency of refrigeration units;
installation of isotope level gauges, electronic bridges, solenoid valves and other instrumentation, electric drives;
switching on and off of electric drives;
rules for receiving and checking equipment after repair;
the procedure and form of maintaining the technical and reporting documentation of the installation.

Qualification requirements:

vocational education;
advanced training and work experience by profession as a refrigeration engineer of the 5th category - at least 1 year.

II. Official duties

The refrigeration engineer is responsible for the following duties:

Serves refrigeration units with a total cooling capacity of more than 12600000. KJ / h. (More than 3 million Kcal / h.).
Supervision of the work of lower-ranking machinists in a shift.

III. Rights

The refrigeration engineer has the right to:

Get acquainted with the draft decisions of the management of the enterprise regarding its activities.
Participate in the discussion of issues related to the performance of his duties.
Make suggestions for improving the work related to the provisions of this instruction.
Within the limits of his competence, inform his immediate supervisor about all those identified in the course of his activities, and make proposals for their elimination.
Require the management of the enterprise to assist in the performance of their duties.

IV. A responsibility

The refrigeration engineer is responsible for:

For improper performance or non-performance of their official duties, as well as for non-use or directly to their rights provided for by this Job Description - to the extent determined by the current legislation of Ukraine.
For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine.
For causing material damage - within the limits determined by the current labor legislation on labor of Ukraine.

We recommend interesting articles Section Job descriptions:

▪ Accountant for accounting of intangible assets. Job description

▪ Regional Manager. Job description

▪ Metal cutter with scissors. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

Waste of electricity by electronic devices 05.07.2014

Today, there are 14 billion printers, set-top boxes, game consoles and other electronic devices around the world that waste $80 billion a year in electricity due to inefficient technology. Such data is provided by the International Energy Agency (IEA).

Worldwide, networked devices use about 616 TWh of electricity, most of which is consumed in standby mode.

The problem is that devices in standby mode consume much more power than is necessary to maintain communication with the network. Maria van der Hoeven, CEO of the IEA, claims that even with the best technology available today, these devices can perform the same tasks while in standby mode while using 65% less power. By 2020, the amount of electricity wasted due to the fact that electronic devices consume about the same amount in standby mode as they do during operation will reach $120 billion.

As more and more appliances and household appliances are connected to the network, the need for electricity increases. Analysts forecast an increase in the number of grid appliances in use to 2020 billion by 50, and to 100 billion in the next decade. By improving the energy efficiency of grid appliances, 600 billion kWh of energy can be saved in the coming years, which corresponds to the shutdown of 200 standard 500-MW coal power plants.

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the site Home workshop. Article selection

▪ article Patron. Popular expression

▪ article What is flint for lighters made of? Detailed answer

▪ Kinkan article. Legends, cultivation, methods of application

▪ article Amateur metal detector. Encyclopedia of radio electronics and electrical engineering

▪ article Spectacular card transfer from one hand to another. Focus Secret

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews