Job description for buttermaker

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for buttermaker. Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

Buttermaker is directly subordinated to _______.
The buttermaker follows the directions of _______.
Buttermaker replaces _______.
Buttermaker replaces _______.
Maslodel is appointed to the position and dismissed by the head of the department in agreement with the head of the department.
Must know:

installation of oil production equipment;
composition and physico-chemical properties of milk, cream and butter;
technology for the production of all types of butter;
purpose and types of instrumentation and control devices used;
requirements for the quality of raw materials and oils used.

II. Official duties

The maslodel performs the following job responsibilities:

Conducting the butter production process on production lines of various types and in continuous butter makers.
Regulation of the mode of pasteurization, deodorization and oil formation, the correct operation of machines, devices according to instrumentation.
Separation of cream, regulation of the level of cream in intermediate tanks and accumulative baths according to instrument readings.
Regulation of the modes of receipt of cream, their churning, processing, washing of butter grains according to instrumentation.
Monitoring the condition and operation of the oil maker, troubleshooting.
Preparation of a mixture of fillers, the introduction of a mixture or other components: common salt, bacterial starter.
Checking the quality of oil production.
Monitoring the uniform filling of boxes with oil, weight control, changing boxes.
Preparation of oil for shipment.

III. Rights

The oilmaker has the right:

give assignments to subordinate employees, tasks on a range of issues included in his functional duties;
control the fulfillment of production tasks, the timely execution of individual orders by employees subordinate to him;
to request and receive the necessary materials and documents related to the issues of their activities and activities of employees subordinate to him;
interact with other services of the enterprise on production and other issues that are part of its functional duties;
get acquainted with the draft decisions of the company's management regarding the activities of the Division;
propose for consideration by the manager proposals for improving the work related to the duties provided for in this Job Description;
submit for consideration by the head of the proposal on the promotion of distinguished employees, the imposition of penalties on violators of production and labor discipline;
report to the manager on all identified violations and shortcomings in connection with the work performed.

IV. A responsibility

The oilmaker is responsible for:

For failure to perform (improper performance) of their official duties provided for by this Job Description, within the limits determined by the current labor legislation of Ukraine.
For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine.
For causing material damage - within the limits determined by the current labor, criminal and civil legislation of Ukraine.

We recommend interesting articles Section Job descriptions:

▪ Accountant-cashier. Job description

▪ Allergist-immunologist. Job description

▪ Production preparation engineer. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

Microphone Razer Seiren 17.12.2014

The microphone is not a part of a computer system that gets a lot of attention. Most users do not even think about this component, using either cheap headsets for communication, or generally being content with the microphone built into the webcam with its very mediocre voice quality. But those who often record videos and podcasts know how important a good microphone is and how bad it can spoil the overall impression of the video.

The well-known manufacturer of gaming accessories, Razer, has met this category of enthusiasts by offering them the Seiren, a microphone specifically designed for high-quality speech and vocal recording, but due to its design features, it is also suitable for digitizing instrumental parts.

Unlike studio models that require 48V power supply and use professional XLR connectors, Seiren, thanks to the integrated ADC, can be connected to a regular USB port. But this is not the simplest ADC for a couple of dollars, but quite a serious solution that can digitize sound in 24-bit 192 kHz format. The most important part, the microphone itself, is made up of three 14mm condenser modules, allowing you to customize the polar pattern to suit your needs: traditional cardioid for podcasting and live streaming, stereo for vocals and instruments, and omnidirectional for teleconferencing , and bi-directional - for interviews or recording duet vocals.

The sensitivity of the microphone part is 4,5 mV / Pascal at a frequency of 1 kHz, the declared frequency range is from 20 Hz to 20 kHz. The maximum sound pressure that Seiren can withstand without significant distortion is 120 dB with a harmonic distortion level of 0,5%. For zero-latency monitoring, the Razer Seiren has a separate headphone amplifier with a signal-to-noise ratio of around 114 dB and delivering 130 milliwatts per channel into a 16 ohm load.

The body of the device is made of anodized aluminum, has a classic desktop stand and can be additionally equipped with a pop filter that cuts off interference from breathing and explosive consonants. If the microphone is to be used in a stand, Razer offers a spider mount.

The price of the Razer Seiren kit with a spider and a pop filter is $230, and a separate microphone will cost a lover of high-quality sound recording $180.

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the site Household electrical appliances. Selection of articles

▪ article International cooperation in the field of life safety and environmental protection. Basics of safe life

▪ article In which of the wars did the most British soldiers die - if you count as a percentage? Detailed answer

▪ article Working with hand forging tools. Standard instruction on labor protection

▪ article Gilding of metals. Simple recipes and tips

▪ article Power supply, 13,8 volts 20 amps. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews