Job description for an engineer for automation and mechanization of production processes

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for an engineer for automation and mechanization of production processes. Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

An engineer for the automation and mechanization of production processes belongs to the category of specialists.
For the position:

engineer for automation and mechanization of production processes, a person is appointed who has a higher professional (technical) education without presenting requirements for work experience or secondary vocational (technical) education and work experience in the positions of a technician of category I for at least 3 years or other positions filled by specialists with secondary vocational education, at least 5 years;
engineer for automation and mechanization of production processes II category - a person with higher professional (technical) education and work experience as an engineer for automation and mechanization of production processes or other engineering and technical positions filled by specialists with higher professional education, at least 3 years;
engineer for automation and mechanization of production processes of the 3st category - a person who has a higher professional (technical) education and work experience as an engineer for the automation and mechanization of production processes of the XNUMXnd category for at least XNUMX years.

Appointment to the position of an engineer for automation and mechanization of production processes and dismissal from it is carried out by order of the director of the enterprise on the proposal of the head of the department for automation and mechanization of production processes.
An engineer for automation and mechanization of production processes must know:

resolutions, orders, orders, methodological and regulatory materials on issues of automation and mechanization of production;
prospects for the technical development of the enterprise;
production and organizational structure of the enterprise;
design features and purpose of automation and mechanization means, rules for their operation;
procedure and methods for planning work on automation and mechanization of production;
the main requirements for the developed structures;
production technology of the enterprise;
procedure and methods for conducting patent research;
the procedure for the development and execution of technical documentation;
methods for analyzing the technical level of objects of engineering and technology;
the basic requirements for the rational organization of labor in the design and construction;
the procedure for concluding contracts with third parties;
fundamentals of technical aesthetics and artistic design;
means of computer technology, communications and communications;
methods for determining the economic efficiency of the introduction of automation and mechanization of production;
advanced domestic and foreign experience in the field of automation and mechanization of production processes;
fundamentals of economics, organization of production, labor and management;
fundamentals of labor legislation;
rules and regulations of labor protection.

The engineer for automation and mechanization of production processes reports directly to the head of the department for automation and mechanization of production processes.
During the absence of an engineer for automation and mechanization of production processes (vacation, illness, etc.), his duties are performed by a person appointed in the prescribed manner. This person acquires the appropriate rights and is responsible for the proper performance of the duties assigned to him.

II. Official duties

Engineer for automation and mechanization of production processes:

Carries out work on the introduction of integrated automation and mechanization of production processes, contributing to an increase in the technical level of production, labor productivity, cost reduction, improvement of product quality, ensuring favorable working conditions and its safety.
It studies production processes in order to determine the areas of main and auxiliary work and operations subject to automation and mechanization, conducts patent research and determines the indicators of the technical level of the designed objects of equipment and technology.
Participates in the preparation of long-term and current plans for the automation and mechanization of production processes, labor-intensive manual work, lifting and transport, loading and unloading and warehouse operations, in the preparation of measures for the reconstruction and technical re-equipment of the enterprise, reducing the cost of heavy manual labor.
Prepares technical specifications for the creation of automation and mechanization tools and feasibility studies of the structures being developed.
Participates in the review of draft and technical projects, working drawings developed by order of the enterprise, as well as in the installation, testing, adjustment and commissioning of automation and mechanization equipment, monitors their maintenance.
Performs calculations of the effectiveness of measures for automation and mechanization of production, draws up applications for the necessary equipment.
Participates in the review of technical documentation related to the design of automation and mechanization of the production of newly built facilities, in the development of more advanced designs of protective and protective equipment and sealing harmful production processes.
Analyzes the effectiveness of the means of automation and mechanization used, indicators of their use, prepares proposals for eliminating the identified shortcomings, changing designs or individual assembly units to better ones.
Takes measures to ensure the reliability and uninterrupted operation of automation and mechanization.
Controls the activities of the enterprise divisions that automate and mechanize production processes, monitors the compliance of the implemented tools with the current level of technology development.
Provides instruction and assistance to employees in mastering new designs of automation and mechanization tools, organizes work to improve their technical knowledge.
Carries out control over the correct operation of reconstructed and modernized machines, mechanisms and other equipment, compliance with technological processes of production.
Participates in the development of instructions for the operation and repair of equipment, safe work in the maintenance of automation and mechanization, other technical documentation, in the preparation of applications for inventions and industrial designs.
Prepares materials for concluding contracts with specialized organizations for research, design and development work, as well as for the manufacture and repair of automation and mechanization equipment, develops and coordinates work schedules, provides the necessary technical data and materials.
Takes part in the consideration of rationalization proposals and inventions, the study and dissemination of best practices, rational techniques and methods of work, promotes new achievements in the field of automation and mechanization of production processes.
Prepares reports on completed work.

III. Rights

An engineer for automation and mechanization of production processes has the right to:

Get acquainted with the draft decisions of the management of the enterprise relating to its activities.
Submit proposals for the management to improve the work related to the duties provided for in this job description.
Notify the immediate supervisor of all shortcomings in the production activities of the enterprise (its structural divisions) identified in the course of the performance of their duties and make proposals for their elimination.
Request personally or on behalf of the immediate supervisor from the heads of enterprise departments and specialists information and documents necessary for the performance of his duties.
Involve specialists from all (individual) structural divisions in solving the tasks assigned to him (if this is provided for by the regulations on structural divisions, if not, then with the permission of the management).
Require the management of the enterprise to assist in the performance of his duties and rights.

III. A responsibility

The engineer for automation and mechanization of production processes is responsible for:

For improper performance or non-performance of their official duties provided for by this Job Description - within the limits determined by the current labor legislation of Ukraine.
For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine.
For causing material damage - within the limits determined by the current labor and civil legislation of Ukraine.

We recommend interesting articles Section Job descriptions:

▪ Chief Project Engineer. Job description

▪ Dentist. Job description

▪ Deputy Head of Customer Relations Department. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

Ball lightning is modeled 17.03.2009

By applying a 5000-volt discharge from a capacitor bank to a glass tank of tap water, German scientists from the Plasma Physics Institute in Berlin produce a glowing ball about 20 centimeters in diameter. It rises from the tank about half a meter.

The experimenters believe that they were able to simulate the process of the occurrence of ball lightning. True, the duration of the existence of their "working model" is less than a second, while a real ball lightning usually lasts from 2 to 8 seconds. But the voltage developed by lightning is at least a thousand times greater than that from capacitors.

Spectroscopy has shown that the temperature of the plasma ball in the first moments reaches 5000 degrees Celsius, but quickly drops. The plasma contains sodium and calcium ions (from tap water), as well as copper ions (from electrodes).

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the site House, household plots, hobbies. Article selection

▪ article The poet's soul could not bear it. Popular expression

▪ article What is ozone? Detailed answer

▪ article When there are a lot of mosquitoes. Travel Tips

▪ article Means for coloring hair. Simple recipes and tips

▪ article Without cutting the ropes. Focus secret

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews