Job description for hydraulic engineering (irrigation and drainage systems)

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for hydraulic engineer (irrigation and drainage systems). Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The hydraulic engineer reports directly to _______.
The hydraulic engineer follows the instructions of _______.
The hydraulic engineer replaces _______.
Hydraulic engineering replaces _______.
Must know:

Land Code of Ukraine;
Water Code;
Law of Ukraine "On Land Reclamation";
Rules for the technical operation of irrigation and drainage systems;
resolutions, instructions, orders of governing bodies and other methodological and regulatory materials on the technical operation of reclamation systems;
requirements of environmental and sanitary authorities to prevent harm to the environment;
fundamentals of geodesy, hydrology and hydrogeology, hydraulic engineering and hydraulics, economics and organization of production, management of technological processes of production;
rules and norms of labor protection, industrial sanitation, fire protection
life safety and system protection in the event of emergency situations;
order and planning of repair and maintenance work;
technical characteristics, design features and operating modes of reclamation facilities, prospects for their development;
rules for acceptance and commissioning of repaired facilities;
pay and management;
labor legislation.

Qualification requirements:

Leading hydraulic engineer (irrigation and drainage systems): complete higher education in the relevant field of training (master, specialist) and advanced training, work experience in the profession of hydraulic engineer (irrigation and drainage systems) category I - at least 2 years.
Hydraulic engineer (irrigation and drainage systems) Category I: higher professional (technical) education and advanced training; for a master - no requirements for work experience, for a specialist - work experience in the profession of hydraulic engineering (irrigation and drainage systems) category II - at least 2 years.
Hydraulic engineer (irrigation and drainage systems) category II: higher professional (technical) education, etc. Work experience in the profession of hydraulic engineering (irrigation and drainage systems) - at least 2 years.
Hydraulic engineer (irrigation and drainage systems): complete higher education in the relevant field of training (specialist) with no work experience requirements.

II. Official duties

The Hydraulic Technician is responsible for the following:

Ensures the implementation of organizational and technical measures to maintain all elements of the reclamation system in good working order and operational condition in accordance with the requirements stipulated by legislative acts and other regulatory documents.
Organizes, together with land users and owners of reclaimed lands, the development and implementation of a system of engineering measures to ensure the technological integrity of the functioning of reclamation systems.
Determines performers, makes proposals regarding sources of financing for supervision, maintenance of systems, carrying out current and major repairs, monitors their implementation and accepts the work performed.
Introduces new equipment, advanced technologies and small-scale mechanization equipment to carry out repair and maintenance work.
Provides passage of floods and floods and preparation of systems for the growing season.
Organizes rational water use in irrigation systems, timely and uninterrupted water supply to water users within the specified time frame.
Organizes water distribution equipment with water metering devices and accounts for water entering the irrigation system.
Contributes to the organization of the operation of sprinkler equipment, monitors compliance with scientifically based irrigation regimes.
Provides conditions for creating and maintaining an optimal water-air regime in the root layer on drained lands.
Introduces measures to strictly conserve water, energy and financial resources by complying with established limits.
Participates in the work of commissions to determine the technical condition of elements of reclamation systems, makes proposals to improve their technical level.
Carries out daily monitoring of staff compliance with the rules for the technical operation of elements of the reclamation network, monitors workers' compliance with labor protection requirements, labor discipline and internal regulations.

III. Rights

The hydraulic engineer has the right:

Get acquainted with the draft decisions of the management of the enterprise regarding its activities.
Participate in the discussion of issues related to the performance of his duties.
Make suggestions for improving the work related to the provisions of this instruction.
Within the limits of his competence, inform his immediate supervisor about all those identified in the course of his activities, and make proposals for their elimination.
Require the management of the enterprise to assist in the performance of their duties.

IV. A responsibility

The hydraulic engineer is responsible

For improper performance or non-performance of their official duties, as well as for non-use or directly to their rights provided for by this Job Description - to the extent determined by the current legislation of Ukraine.
For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine.
For causing material damage - within the limits determined by the current labor legislation on labor of Ukraine.

We recommend interesting articles Section Job descriptions:

▪ Chief Accountant. Job description

▪ Worker for complex cleaning and maintenance of households. Job description

▪ Hydraulic technician. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

The new concept of the Internet from AllSeen Alliance 12.12.2013

Manufacturers of devices, network equipment and electronic components announced the creation of the AllSeen Alliance. Its goal is to develop a single industry standard through which communication between devices in the concept of "Internet of things" will be carried out. The members of the alliance call it the "Internet of Everything" and will jointly develop software and channel resources to create an open framework. It will enable device manufacturers, service providers and developers to create interoperable devices and services.

The alliance includes Panasonic, Haier, LG Electronics, Sharp, TP-Link, HTC, Harman, Qualcomm, Cisco, D-Link, Silicon Image, Canary, Fon, LeTV, LIFX, LiteOn, Moxtreme, Sears Holdings, Sproutling, The Sprosty Network, Weaved, doubleTwist and Wilocity are 24 companies in total. They will use operating systems with the Linux kernel in their solutions, and the Linux Foundation, a non-profit organization, will be responsible for software development.

Equipment and component manufacturers will use the AllJoyn open platform, developed by the world's largest chipmaker for smartphones and tablets Qualcomm, which is also a member of the alliance, as the basis for connecting devices in the "Internet of Everything" concept.

The platform is based on a network topology with a nodal structure, in which each node serves not only to transmit and receive its own data, but also as an intermediate point for data transmission between neighboring nodes.

Qualcomm chose this topology because it does not consider it necessary to connect all devices to the Internet. "When you have 2013 devices at home, you don't want all that good stuff connected to the public network," said Rob Chandhok, head of Qualcomm's Innovation Center. Qualcomm introduced the AllJoyn platform in February XNUMX. It can be used on any processor architecture and device running any operating system. Work on the platform has been going on for several years.

In addition to the platform itself, Qualcomm offers a software development kit (SDK) and case studies. It is planned to transfer data between devices using various networks, including Wi-Fi, Ethernet and the electrical network.

The Internet of Things is one of the most promising areas in the information technology market. According to the forecast of IDC, by 2020 the volume of this segment in terms of money will reach $8,9 trillion. "The impetus for the development of the Internet of Things market was provided by a number of factors," said Vernon Turner, senior vice president of IDC. "We have no doubt that the demand for related technologies and services is present both among companies and end users "We are confident that this demand will continue to grow."

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the Electrician website. PUE. Article selection

▪ article by Ernst Feuchtersleben. Famous aphorisms

▪ article Why is Singapore called a fine city? Detailed answer

▪ article Working in an extended day group. Standard instruction on labor protection

▪ article Homemade wind power plant. Wind turbine maintenance. Encyclopedia of radio electronics and electrical engineering

▪ article Magic wand-fountain. Focus Secret

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews