Job description for an energy engineer

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for an energy engineer. Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

An energy engineer belongs to the category of managers.
The power engineer is appointed and dismissed from his position by order of the director.
A person who has a complete higher education in the relevant area of training (Master, Specialist) and at least 3 years of work experience is appointed to the position of an energy engineer.
The power engineer must know:

resolutions, orders, orders of higher authorities, regulatory documents on labor protection, fire safety and industrial sanitation;
rules and means of monitoring the compliance of the technical condition of equipment with the requirements for safe work;
methods for studying working conditions in the workplace;
the main technological processes for the production of the enterprise's products;
organizational structure of enterprise management;
organizational work on safety and heat engineering;
system of labor safety standards;
methods and forms of propaganda of information on heat engineering;
the procedure and deadlines for reporting on the implementation of measures for labor protection and industrial sanitation;
norms and procedure for providing workers with overalls and the terms of its operation;
rules of internal labor regulations;
norms and requirements for labor protection, fire safety and industrial sanitation.

II. Official duties

The Energy Engineer has the following responsibilities:

Studying working conditions in the workplace.
Organizes technically correct operation and timely repair of energy and environmental protection equipment and energy systems, uninterrupted supply of production with electricity, steam, gas, water and other types of energy, control over the rational use of energy resources at the enterprise, consistent compliance with the energy saving and saving regime.
Supervises the planning of the work of electricians, the development of repair schedules for power equipment and power networks, plans for the production and consumption of electricity, process fuel, steam, gas, water, compressed air, consumption rates and modes of consumption of all types of energy by the enterprise.
Provides preparation of applications and necessary calculations for them for:

purchase of power equipment, materials, spare parts,
supply of energy and heat energy to the enterprise and connection of additional capacity to energy supply enterprises,
development of measures to reduce the consumption of energy resources, the introduction of new technology that ensures reliable and safe operation of power plants,
increase in labor productivity.

Taking part:

in the development of plans for the long-term development of the energy sector, increasing the efficiency of production,
in the preparation of proposals for the reconstruction, technical re-equipment of the enterprise, the introduction of means of complex mechanization and automation of production processes,
in considering projects for the reconstruction and modernization of energy supply systems of enterprises and its divisions.

Ensures the maintenance of the technical passport of the energy economy of the enterprise.
Prepares conclusions on the developed projects, participates in testing and acceptance of power plants and networks for commercial operation.
Participates in the work of the commission for the commissioning of newly built facilities and installed equipment.
Monitors compliance with labor protection rules, instructions for the operation of power plants and the use of power plants and networks.
Concludes contracts with third-party organizations to provide the enterprise with electricity, steam, water and other types of energy, monitors their implementation.
Organizes the storage, accounting of the availability and use of energy equipment located at the enterprise, as well as accounting and analysis of electricity and fuel consumption, technical and economic indicators of the energy sector, accidents and their causes.
Supervises the employees of the department and divisions of the enterprise that provide energy services to production.

III. Rights

The power engineer has the right to:

Act on behalf of the department, represent the interests of the enterprise in relations with other structural divisions of the enterprise.
To check the activities of the structural divisions of the enterprise that provide energy services to the enterprise.
Participate in the preparation of draft orders, instructions, instructions and other documents related to the energy service of the enterprise.
Demand and receive from the heads of structural divisions of the enterprise and specialists the necessary information.
Independently conduct correspondence with the structural divisions of the enterprise on issues related to its competence.
Interact with the heads of all structural divisions of the enterprise on the activities of the energy sector.
Within the scope of his competence, sign and visit with his signature orders on the enterprise on issues of energy maintenance of production.
To carry out disconnection from the power supply network of electrical, thermal and other equipment that is in poor condition, as well as in the event of a threat of accidents and accidents.

IV. A responsibility

The Energy Engineer is responsible for:

For improper performance of the duties assigned to him by this Job Description.
Non-disclosure of information constituting the commercial secret of the enterprise.
Compliance with internal labor regulations.
For the commission of an administrative crime in the course of carrying out its activities, for which it is liable in accordance with the norms of the legislation of Ukraine.

We recommend interesting articles Section Job descriptions:

▪ Broadcast leader. Job description

▪ Head of the planning and accounting bureau of the sales department. Job description

▪ Head of the General Department. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

Miniature efficient acoustic amplifier 25.07.2021

Scientists at Sandia National Laboratories have created what can be called the smallest and most efficient acoustic amplifier in the world. This amplifier is based on principles developed about five decades ago, but the latest advances in electronics and nanomanufacturing have made it possible to drastically reduce the size and increase the efficiency of the device by more than 10 times.

Radio signal amplifiers are used today in almost every device, be it a mobile phone or an electric kettle with the ability to access the Internet. Now traditional amplifiers are used to amplify radio signals, but for quite a long time there has been an idea that instead of a stream of electrons, high-frequency acoustic waves can be used.

The first acoustic amplifiers of radio signals appeared in the 70s of the last century. These were relatively large devices, the area of the chips of which reached one square centimeter, their operation required a high electrical potential of the order of 2 thousand volts, and during operation they generated a large amount of heat, which negatively affected the amount of energy consumed, which was 500 mW.

The new acoustic amplifier is a 276 MHz amplifier. In its manufacture, a layer of a semiconductor material, gallium-indium arsenide, with a thickness of only 83 atoms, and a layer of a piezoelectric material comparable in thickness, lithium niobate, was used. As a result, the entire structure of the amplifier fits into an area of 0.5 square millimeters, it operates at a voltage of 36 volts and consumes only 20 mW of energy. At the same time, the new amplifier provides 100 times higher radio signal gain than similar devices of previous generations.

A similar amplifier operating in the 2 GHz band, which is currently used in cellular communications, will have an even smaller size, it will be able to fit in an area of 0.02 square millimeters, which is about 10 times smaller than existing modern solutions.

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the site Experiments in chemistry. Article selection

▪ article Lost sheep. Popular expression

▪ article Why did Dirac want to refuse the Nobel Prize? Detailed answer

▪ article Auto mechanic. Job description

▪ article Low-frequency amplifier on the TDA2004 chip. Encyclopedia of radio electronics and electrical engineering

▪ article Ribbons-travelers. Focus secret

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews