Free technical library

Job description for a press operator. Full document

Occupational Safety and Health / Job descriptions

 Comments on the article

I. General Provisions

1. The enamel presser reports directly to _______.
2. The enamel presser follows the instructions of _______.
3. The enamel presser replaces _______.
4. The enamel presser is replaced by _______.
5. The enamel presser is appointed to the position and dismissed by the head of the department in agreement with the head of the department.
6. Must know:

• device, principle of operation of presses;
• setup rules;
• purpose and rules for the use of instrumentation;
• pressing mode;
• requirements for the quality of semi-finished products and finished products.

7. When transferring to another job or being released from a position, the Enamel Presser is responsible for the proper and timely delivery of work to the person taking up the current position, and in the absence of one, to the person replacing him or directly to his supervisor.

II. Official duties

The Enamel Presser performs the following job responsibilities:

1. Pressing plates made of artificial leather, plates made of thermoplastic materials or papers impregnated with synthetic resins on hydraulic presses with steam heating, as well as pressing raw materials and materials while simultaneously supervising a team of pressers.
2. Performs related duties in accordance with production needs.

III. Rights

The enamel presser has the right to:

1. give assignments to subordinate employees, tasks on a range of issues included in his functional duties;
2. control the fulfillment of production tasks, the timely execution of individual orders by employees subordinate to him;
3. to request and receive the necessary materials and documents related to the issues of their activities and activities of employees subordinate to him;
4. interact with other services of the enterprise on production and other issues that are part of its functional duties;
5. get acquainted with the draft decisions of the company's management regarding the activities of the Division;
6. propose for consideration by the manager proposals for improving the work related to the duties provided for in this Job Description;
7. submit for consideration by the head of the proposal on the promotion of distinguished employees, the imposition of penalties on violators of production and labor discipline;
8. report to the manager on all identified violations and shortcomings in connection with the work performed.

IV. A responsibility

The enamel presser is responsible for:

1. improper performance or non-performance of their official duties provided for by this Job Description - within the limits determined by the labor legislation of Ukraine;
2. violation of the rules and regulations governing the activities of the enterprise;
3. offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine;
4. infliction of material damage - within the limits determined by the current labor and civil legislation of Ukraine;
5. compliance with current instructions, orders and orders for the preservation of trade secrets and confidential information;
6. compliance with internal regulations, safety and fire safety rules.

 We recommend interesting articles Section Job descriptions:

▪ Agroforestry reclamator. Job description

▪ Head of labor protection department. Job description

▪ Area mechanic. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive Cooler FrigusAir 400 ARGB 03.05.2022 Antec has announced the universal CPU cooler FrigusAir 400 ARGB. The novelty has a classic tower layout and is also suitable for XNUMXth generation Intel Core processors (Alder Lake family). The design provides for the use of an aluminum radiator and four U-shaped heat pipes with a diameter of 6 mm. They have direct contact with the processor cover, which increases the efficiency of heat dissipation. A 120 mm fan is mounted on the radiator, the rotation speed of which is regulated by pulse-width modulation (PWM) in the range from 800 to 1600 rpm. An air flow of up to 130 cubic meters per hour is created. The maximum noise level is 36 dBA. The cooler has a multi-color addressable ARGB backlight. You can customize the effects through a motherboard with MSI Mystic Light technology, ASUS Aura, ASRock Polychrome, etc. The overall dimensions of the novelty are 125 x 75 x 158 mm. Compatible with AMD AM4/AM3+/AM3/AM2+/AM2/FM2+/FM2/FM1 processors and Intel LGA 2066/2011-V3/1366/1151/1150/1155/1156/1700 chips.

Other interesting news:

▪ Synthesis of bones and enamel

▪ Eleven more moons of Jupiter

▪ Insulation of houses with cigarette butts

▪ Artificial retina on photocells

▪ Growing stem cells on the ISS

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the site Audio and video surveillance. Selection of articles

▪ article Peter I. Famous aphorisms

▪ How many laws of robotics did Isaac Asimov come up with? Detailed answer

▪ article Bucket knot. Travel Tips

▪ article New Year's Eve. Encyclopedia of radio electronics and electrical engineering

▪ article Repainting scarf. Focus Secret

Leave your comment on this article:

All languages ​​of this page

Arabic	Hebrew	Polish
Bengali	Hindi	Portuguese
Chinese	Italian	Spanish
English	Japanese	Turkish
French	Korean	Ukrainian
German	Malay	Vietnamese

Home page | Library | Articles | Website map | Site Reviews

www.diagram.com.ua
2000-2024