Job description for a tram driver

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for a tram driver. Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The tram driver belongs to the category of technical performers and reports directly to _______.
A person who has professional training according to an established program is appointed to the position of a tram driver without presenting requirements for work experience.
Appointment to the position of a tram driver and dismissal from it are made by order of the head of the enterprise.
The tram driver must know:

design, principle of operation and possible malfunctions of tram cars and their equipment;
rules of the road, technical operation and use of trams;
features of driving trams in autumn-winter conditions and the procedure for operating them on routes with difficult traffic conditions;
arrangement of composters and radio installations;
instructions for saving energy; frequency of inspections and repairs of trams;
forms of travel tickets, the procedure for issuing travel documentation;
profile and features of the served route;
rules and norms of labor protection, safety precautions, industrial sanitation and fire protection;
techniques and methods of providing first medical aid;

II. Official duties

The tram driver performs the following duties:

Management of tram trains operated in this facility, in compliance with the schedule and traffic safety rules.
Coupling of wagons.
Monitoring compliance with the rules of boarding and disembarking passengers, loading and unloading cargo.
Announcement using radio installations of stopping points and fare payment procedures.
Performing preparatory work before leaving the line and after returning to the park.
Elimination of the simplest malfunctions of the rolling stock that have arisen on the line.
Sale of subscription books at stopping points.
Undergoing medical examinations in accordance with the established procedure in order to identify diseases incompatible with the duties of a tram driver.

III. Rights

The tram driver has the right:

Get acquainted with the draft decisions of the management of the enterprise relating to its activities.
Submit proposals for improvement of the methods of work performed by the enterprise and improve the quality of passenger service for consideration by the management of the enterprise.
Require the management of the enterprise to assist in the performance of their duties.

IV. A responsibility

The tram driver is responsible for:

For improper performance or non-performance of their official duties provided for by this Job Description - within the limits determined by the current labor legislation of Ukraine.
For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine.
For causing material damage - within the limits determined by the current labor and civil legislation of Ukraine

We recommend interesting articles Section Job descriptions:

▪ Chief designer of the production department of the television broadcasting department. Job description

▪ Head of Procurement Department. Job description

▪ Head of technical control department. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

Water is a source of terahertz radiation 25.09.2017

It is known that water intensely absorbs electromagnetic waves in the terahertz range, which is why for a long time it was considered unlikely that liquid water could act as a source of terahertz waves. However, an international team of scientists has demonstrated that a thin layer of water, no more than 200 micrometers thick, irradiated with ultrashort pulses of laser light, is capable of emitting terahertz electromagnetic radiation. And, such a source of terahertz waves can be used in the future in wireless communication technologies, industrial quality control and shooting with high resolution and the ability to penetrate deep into the object being filmed.

In their experiments, the scientists focused the light of a femtosecond laser, a laser whose pulse duration is measured in femtoseconds (10^-12 seconds), on the surface of a thin layer of water. The energy of this pulse leads to the creation of a plasma cloud, consisting of ions and free electrons, at the beam focusing point. Some of the energy of the laser pulse is spent on additional excitation of ions and electrons, which begin to emit waves in the terahertz range.

Further studies have shown that terahertz radiation obtained using water has some features in relation to radiation obtained using other methods. In the case of water, an increase in the duration of the laser pulse leads to an increase in the number and energy of terahertz waves, while other methods require a decrease in the duration and increase in the energy of the pulse to obtain the same effect. Secondly, the energy and amount of terahertz radiation depends on the polarization of the light and the angle of incidence of the laser light beam on the surface of the water film.

The results obtained by scientists cannot yet be explained from the point of view of physical laws and mechanisms known to scientists involved in the processes of formation of terahertz radiation. Therefore, it is still very early to talk about the possibility of any practical application of water as a source of radiation. Scientists hope that further research into the interactions between laser light and water will lead to an understanding of the ongoing processes, on the basis of which it will be possible to develop new terahertz technologies.

Other interesting news:

▪ Plant Pore Control

▪ Golden military uniform

▪ GPS alternative works even underground

▪ Quiet supersonic aircraft X-59 QueSST

▪ Repair satellite to be launched into orbit

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the website Residual current devices. Selection of articles

▪ Nemesis article. Popular expression

▪ article What is the name of the capital of Thailand? Detailed answer

▪ article Acceptor of goods. Job description

▪ article Theory: 3H preamplifiers. Encyclopedia of radio electronics and electrical engineering

▪ article Linear stabilizers with high efficiency. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews