Job description for a car driver

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for a car driver. Full Document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The driver of the car is directly subordinated to _______.
The driver of the car follows the instructions of _______.
The driver of the car replaces _______.
The driver of the car is replaced by _______.
The driver of the car is appointed to the position and dismissed by the head of the department in agreement with the head of the unit.
Must know:

purpose, device and rules for the maintenance of road trains, device and rules for the maintenance of cars of the latest releases;
the impact of individual performance indicators of vehicles on the cost of transportation;
ways to ensure high-performance and economical use of rolling stock;
the main technical and operational qualities of the rolling stock and their impact on traffic safety;
elements of the theory of the car;
the main provisions of the traffic safety service of a motor transport enterprise.

II. Official duties

The driver of the vehicle must:

To ensure the correct smooth professional driving of the car, ensuring the maximum safety of the life and health of passengers and the technically sound condition of the car itself. Do not use sound signals and sudden overtaking of vehicles in front unless absolutely necessary. The driver is obliged and able to foresee any traffic situation; choose the speed of movement and distance, excluding the occurrence of an emergency.
Do not leave the vehicle unattended out of sight for any minimum period of time that gives the chance of theft of the vehicle or theft of any items from the passenger compartment. Park your car only in guarded parking lots.
It is mandatory to put the car on the alarm in any case of exit from the passenger compartment. While driving and parking, all vehicle doors must be locked. When leaving the car (landing), you must make sure that there is no potential danger.
Monitor the technical condition of the vehicle, perform independently the necessary work to ensure its safe operation (according to the operating instructions), timely undergo maintenance at the service center and technical inspection.
Keep the engine, body and interior of the car clean, protect them with appropriate care products for certain surfaces.
Strictly follow all orders of the head of the company and his immediate supervisor. Ensure timely delivery of the vehicle.
Communicate truthful information about your health to your immediate supervisor.
Do not use alcohol before or during work, psychotropic, sleeping pills, antidepressants and other drugs that reduce the attention, reaction and performance of the human body.
Categorically not allow cases of transportation of any passengers or cargo at one's own discretion, as well as any kind of use of a car for personal purposes without the permission of the management. Always be at the workplace in the car or in close proximity to it.
Keep daily waybills, noting routes, kilometers traveled, fuel consumption. Established drivers also note the amount of time worked.
Pay close attention to the surrounding road conditions. Remember the numbers and signs of cars in case of their long following "on the tail" of the car of the company. Report to the immediate supervisor all your suspicions regarding security issues, make suggestions for improving it.
Do not engage in extraneous activities during working hours. Be creative in your immediate responsibilities, try to be useful to the company in its current business activities. Show reasonable constructive initiative.

III. Rights

The driver of the car has the right:

give assignments to subordinate employees, tasks on a range of issues included in his functional duties.
control the fulfillment of production tasks, the timely execution of individual orders by subordinate employees.
request and receive the necessary materials and documents related to the issues of its activities and the activities of employees subordinate to it.
interact with other services of the enterprise on production and other issues that are part of its functional duties.
get acquainted with the draft decisions of the management of the enterprise regarding the activities of the Division.
propose for consideration by the manager proposals for improving the work related to the duties provided for in this Job Description.
submit for consideration by the head of the proposal on the promotion of distinguished employees, the imposition of penalties on violators of production and labor discipline.
report to the manager on all identified violations and shortcomings in connection with the work performed.

IV. A responsibility

The driver of the vehicle is responsible for:

improper performance or non-performance of their official duties provided for by this Job Description - within the limits determined by the labor legislation of Ukraine.
violation of the rules and regulations governing the activities of the enterprise.
When transferring to another job or dismissal from the position, the Car Driver is responsible for the proper and timely delivery of cases to the person taking up this position, and in the absence of such, to the person replacing him or directly to his supervisor.
offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine.
causing material damage - within the limits determined by the current labor and civil legislation of Ukraine.
compliance with current instructions, orders and orders for the preservation of trade secrets and confidential information.
compliance with internal regulations, safety and fire safety rules.

We recommend interesting articles Section Job descriptions:

▪ Chief programmer (team leader) of the informatization department. Job description

▪ Personnel training specialist. Job description

▪ Senior foreman of the production site. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

Film capacitors ECQUA class X2 04.11.2020

Panasonic has extended the operating voltage range to 310 VAC for ECQUA series capacitors (safety class X2).

This series of metallized polypropylene film capacitors uses the original proprietary Patterned Metallization process with the function of a safety mechanism. This unique Panasonic technology protects the capacitor from explosion and complete failure during breakdown, which significantly increases the service life and reliability of the final product.

To date, ECQUA series capacitors have rated AC voltages of 275 and 310 V and a range of rated capacitances of 0,1 ... 10 μF. The operating temperature range of the capacitors is -40...110°C. The use of a flame retardant plastic housing and flame retardant polymer (resin) allows for UL/CSA and European safety class X2 accreditation. All products are fully compliant with RoHS and REACH requirements.

Capacitors of the ECQUA series have high temperature resistance (-40...85°C, 1000 cycles) and guaranteed resistance to high humidity. They have successfully passed the THB test: 85°C, 85%, 240VAC for 1000 hours for 275VAC rated capacitors and 275VAC for 1000 hours for 310VAC rated capacitors.

The noise suppression feature of the ECQUA series capacitors is excellent for a wide range of applications, including filtering in the input/output circuits of charging stations, in the input circuits of on-board chargers, in industrial power supplies, and in industrial energy meters.

The ECQUA series provides high safety and reliability of products.

Characteristics of ECQUA series capacitors:

range of nominal capacitances: 0,1 ... 10 μF;
rated voltages AC: 275 and 320 V;
operating temperature range: -40...110°C;
dielectric material: MPP;
installation: outlet;
guaranteed resistance to high humidity and high temperature resistance;
AEC-Q200 compliance;
compliance with UL/CSA and European safety regulations for class X2;
compliance with RoHS and REACH requirements.

Other interesting news:

▪ Global transport system with airships

▪ Artificial heart from self-organized stem cells

▪ Touch screens will become cheaper

▪ Safe magnetic socket

▪ striped rabbit

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the site Life of remarkable physicists. Article selection

▪ article Motoblock with a trolley. Drawing, description

▪ article Which birds immure themselves in a hollow? Detailed answer

▪ article Field mint. Legends, cultivation, methods of application

▪ Antenna Beverage article. Encyclopedia of radio electronics and electrical engineering

▪ article S-meter calibrator. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews