Job description for a jeweler

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for a jeweler. Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

A jeweler belongs to the category of workers and is directly subordinate to _______.
A person who has a special professional education without presenting requirements for work experience is accepted for the position of a jeweler.
The jeweler is accepted and dismissed from work by order of _______.
The jeweler must know:

labor protection rules;
rules of industrial sanitation and fire safety;
rules for the use of personal protective equipment;
requirements for the quality of work (services) performed, for the rational organization of labor at the workplace;
types of marriage and ways to prevent and eliminate it;
production signaling;
technological sequence and methods for performing preparatory operations before assembling jewelry;
degreasing and washing of assembled products;
methods for preparing bleaching compositions;
methods of prong fastening of inserts;
types of cutting inserts;
composition and methods of preparation of mastics for attaching inserts;
methods for manufacturing complex parts and assemblies for jewelry, ways to fit frames to inserts for various types of setting;
rules for refueling the tool used for backtacking;
physical and mechanical properties of corundum, non-ferrous and precious metals;
physical and mechanical properties, types of cutting of semi-precious and precious stones, requirements for the selection of paired stones for earrings;
the technological process and methods of manual processing of jewelry of the tableware group and the rules for using the tool used;
technology of preparatory work, mounting of simple jewelry and art products;
types of artistic processing of precious and non-ferrous metals and precious stones;
the composition of the mixture for soldering;
hard soldering methods;
techniques for soldering jewelry and art products with filigree with intermediate mounting of parts;
purpose of solders and their symbol on the drawings;
methods for determining the quality of solder by external signs;
techniques for performing mounting operations, glue fastening;
whitening rules;
annealing modes;
arrangement of used devices and tools;
device and operating rules of the contact welding apparatus, polishing and grinding machines;
the main properties of the materials used;
samples of precious and grades of non-ferrous metals;
methods of sharpening and filling the applied tool;
geometry of sharpening, straightening and heat treatment of the cutting tool;
physical and mechanical properties of non-ferrous and precious metals;
processing techniques and methods that ensure minimal loss of precious metals; methods of drawing wire of different sections;
methods of passing the frame and fitting the socket to the insert;
techniques for manufacturing especially complex openwork, figured, faden, carmesite frames;
methods of using devices for drilling and punching holes; rules for heat treatment of jewelry and art products from non-ferrous and precious metals;
installation of muffle furnaces;
technology of filigree winding and filigree soldering;
techniques for melting parts of jewelry and art products;
grain melting methods;
etching methods;
drawing basics;
chain manufacturing technology;
methods of quality control of knitting of the fabric of the chain and the joint of the link;
the device of chain knitting machines, methods of adjustment and adjustment of them in the process of work;
methods for checking the operation of chain knitting machines for the accuracy of positioning the details of the assembly and the formation of the link;
types of material used and basic properties of wear parts;
methods for replacing and installing wear parts, feed units and forming a chain link;
methods of processing jewelry and art products with a drill;
rules for the use of calibers and the magnitude of tolerances, landings when completing the product;
basic information about the parameters of processing parts and assemblies;
rules for performing calculations for constructing figures and sweeps;
techniques for scraping and grinding niello;
basics of restoration work and methods of restoration of silver products;
main stylistic features of arts and crafts;
specific features of foundry, filigree, chased, enamel, stone-cutting, engraving of products made of bone inlaid with metal;
methods of mastic modeling;
features of the manufacture of "Florentine" and "Russian" mosaics;
basics of painting, graphics, sculpture;
main trends of classical and modern jewelry art and jewelry fashion; modes and methods of soldering on a spring machine;
adjustment methods, operating modes of installations for laser welding of jewelry chains;
methods of manufacturing tools for engraving work;
rules for reading drawings;
when working with precious metals - instructions for accounting, storage, processing and delivery of precious metals;
purpose and rules for the use of the applied control and measuring tools and devices;
rules for using a caratometer, carat and analytical balances;
device and principle of operation of the serviced equipment.

The jeweler must have individual creative designs approved by the artistic council.

II. Official duties

Manufacturing and repair:

decorative link bracelets with a complex filigree pattern and enamel;
gold bracelets with an openwork centerpiece;
openwork filigree pendants with soldered two-ilane rosettes and granulation;
brooches with large inserts of precious or semi-precious stones in an openwork frame and small inserts of precious stones with openwork soldering;
wall decorations in the form of a plate with a scanned pattern;
toilet utensils made of silver of especially complex shapes with images of a thematic nature.

Manufacturing, installation:

rings, brooches with up to three parts and one insert, earrings, glasses, salt shakers.

Mount:

silver vases with drawings for enamelling;
gold necklace with precious stones.

Mounting, manufacturing and repair:

braided, articulated, stretchable bracelets;
cufflinks;
filigree rings;
rings, brooches, earrings with three to five details and several inserts of precious stones;
chains of the same type of round, oval and shaped lugs in combination with shaped links, gliders, rosettes;
hollow parts and products;
locks for earrings and brooches;
"rope" corners;
chains of several round ears of various types (chain-ribbon), ears that have the shape of a spiral and are soldered together in pairs.

Installation and repair:

silver brooches with inserts of semi-precious stones in an openwork frame and with openwork soldering;
gold rings with diamonds.

Mounting with fastening parts:

badges, medals, orders.

A set of scanned filigree patterns and soldering:

decorative openwork-filigree dishes with inserts from plates and enamel painting;
openwork filigree brooches with soldered two-plane rosettes;
spherical vases on a conical base with filigree ornaments made of small details;
filigree brooches with fine grain and small enamel overlays;
openwork filigree caskets with multifaceted applied details;
figures of animals and people are decorative volumetric with filigree.

Filigree pattern set and soldering:

brooches, openwork filigree vases with false filigree rosettes.

Sawing and scraping:

forks;
dessert spoons, table spoons, tea spoons.

Fitting the frame to the insert:

gold rings with inserts of semi-precious stones with blind setting.

Production of unique and exclusive jewelry, taking into account national traditions, the main trends of classical and modern jewelry art and jewelry fashion.

III. Rights

The jeweler has the right:

For all social guarantees provided for by law.
Require the management of the enterprise to provide assistance in the performance of their professional duties and the exercise of rights.
Demand the creation of conditions for the performance of professional duties, including the provision of the necessary equipment, inventory, a workplace that meets sanitary and hygienic rules and regulations, etc.
To receive special clothing, special footwear and other personal protective equipment.
Payment of additional expenses for medical, social and professional rehabilitation in cases of damage to health due to an accident at work and occupational disease.
Get acquainted with the draft decisions of the management of the enterprise relating to its activities.
Submit proposals for the management of the enterprise to improve the organization and improve the methods of work performed by it.
Request personally or on behalf of the immediate supervisor documents, materials, tools, etc. necessary for the performance of their duties.
Improve your professional qualifications.
Other rights provided by labor legislation.

IV. A responsibility

The jeweler is responsible for:

For failure to perform (improper performance) of their official duties provided for by this Job Description, within the limits determined by the current labor legislation of Ukraine.
For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine.
For causing material damage - within the limits determined by the current labor, criminal and civil legislation of Ukraine.

We recommend interesting articles Section Job descriptions:

▪ Laboratory operator of a photo lab. Job description

▪ PR manager. Job description

▪ Production preparation engineer. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

Microsoft experimental underwater data centers 20.09.2020

Microsoft has completed the Project Natik experiment with placing data centers under water. The results showed that this model of operation is not only viable, but also more reliable than terrestrial data centers. Techcrunch writes about it.

Project Natik aims to solve the problems of locating data centers in coastal areas around the world. This can solve the problem of scaling the network and improving its performance while keeping equipment maintenance costs low.

The company removed the underwater data center at the beginning of the summer, after which experts began to study the equipment and the air inside. The underwater servers not only showed good performance, but also proved to be eight times more reliable than the terrestrial ones. Researchers do not yet know what caused this, but intend to find it and implement the necessary improvements on land.

In addition, experts noted the increased energy efficiency of underwater data centers. Their location allows you to save energy on the artificial cooling of servers. This is especially important for regions with weak energy infrastructure. For example, in the Orkney Islands (Scotland), renewable energy sources are mainly used - wind and solar, which are not enough for a ground-based data center.

In the future, Microsoft intends to explore the issue of increasing the size of servers, as well as combining them to expand capabilities.

Other interesting news:

▪ Silent power supplies Mean Well LSP-160

▪ 10K TV

▪ Titanium Dioxide Increases the Emission Intensity of Laser LEDs

▪ TR2015x LED Display

▪ Barrier for rodents

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the site History of technology, technology, objects around us. Article selection

▪ article Rest in Bose. Popular expression

▪ article Who is scientifically described as a representative of the Homo sapiens species? Detailed answer

▪ article Transportation of students by road

▪ article Capacitance meter - prefix to the tester. Encyclopedia of radio electronics and electrical engineering

▪ article Economical switching power supply, 220/2x27 volts 600 milliamps. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews