Job description for a copier

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for a copier. Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The copier belongs to the category of technical performers.
A person who has primary vocational education without presenting requirements for work experience or secondary (complete) general education or basic general education and special training according to an established program without presenting requirements for work experience is appointed to the position of a copyist.
Appointment to the position of a copyist and dismissal from it is carried out by order of the director of the enterprise upon presentation.
The copier must know:

provisions and instructions for working with technical documentation;
basics of technical drawing;
tools and devices used for copying, rules for storing and caring for them;
rules for preparing tracing paper or special grades of paper for making copies;
basics of labor organization;
fundamentals of labor legislation;
rules of internal labor regulations;
rules and norms of labor protection, industrial sanitation.

The copier reports directly to _______.
During the absence of the copier, his duties are performed by a person appointed in the prescribed manner. This person acquires the appropriate rights and is responsible for the proper performance of the duties assigned to him.

II. Official duties

Copyist:

Makes copies of drawings, diagrams and other technical documentation made in ink or pencil on tracing paper or special types of paper.
Colours, if necessary, copies with paints or colored ink.
Monitors the condition of tools and fixtures, ensures the safety and proper care of them.

III. Rights

The copyist has the right:

Get acquainted with the draft decisions of the organization's management regarding its activities.
Submit proposals for the management to improve the work related to the duties provided for in this job description.
Require the management of the enterprise to assist in the performance of their duties and rights.
Performs individual official assignments of his immediate supervisor.

IV. A responsibility

The copier is responsible for:

For improper performance or non-performance of their official duties provided for by this Job Description - within the limits determined by the current labor legislation of Ukraine.
For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine.
For causing material damage - within the limits determined by the current labor and civil legislation of Ukraine.

We recommend interesting articles Section Job descriptions:

▪ Broadcast video engineer. Job description

▪ Doctor on duty (paramedic) of the first-aid post. Job description

▪ Broker. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

Each 3D printer is unique in its own way. 24.10.2018

As the experiments of researchers from the University of Buffalo have shown, the same objects made on different 3D printers can be quite distinguished from each other.

The authors of the work proceeded from the fact that each 3D printer, like the same typewriter, reproduces some of its characteristic prints over and over again. Therefore, you just need to understand what kind of prints they are, and learn how to "read" them. A series of identical objects were printed on different printers (14 in total), after which detailed images of each of them were obtained using a scanner. Upon closer examination, it turned out that each printed object had characteristic geometric parameters and texture features. By translating the obtained data into a numerical form, it was possible to calculate the degree of difference between one object and another.

It turned out that the mechanical features that affect the movement of the nozzle, the flow of material, etc. are all rather unique parameters for a particular 3D printer. Based on the totality of such characteristics, it is possible to compare the printed object with a specific apparatus with high accuracy. The researchers also tried to test what is called the strength of their method by testing ways in which you can erase individual fingerprints or try to pass off one device for another. It turned out that whether it is a change in the workplace and printing parameters, or a six-month break in the operation of the printer, or physical damage to printed objects - all this has little effect on the accuracy of identification.

3D printing, like many other things, can be used not only for good, but also for harm. Someone prints weapons, someone forges various parts or makes other bad things. Naturally, forensic scientists would like to have some methods to distinguish one printer from another by their products.

Of course, it is too early to say that all 3D printers sold will be listed in special file cabinets, as is done, for example, with rifled weapons. However, those who attempt to use 3D printing for criminal purposes should be aware that the results of their actions will not remain anonymous.

Other interesting news:

▪ Technological forecasts for the next five years

▪ Earthquake expected in New York

▪ robot

▪ Japan to build a network of orbital energy platforms

▪ AI beat a human at poker

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ site section And then an inventor (TRIZ) appeared. Article selection

▪ article Ends in the water. Popular expression

▪ article What was the first bank? Detailed answer

▪ article Yam beans. Legends, cultivation, methods of application

▪ article Stable crystal oscillator. Encyclopedia of radio electronics and electrical engineering

▪ article The coin disappears from the fist. Focus Secret

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews