Swing chair. Drawing, description

BUILDER, HOUSEHOLDER
Free library / Directory / Builder, home master

Swing chair. Tips for the home master

Builder, home master

Probably, there is no such person who would not love a swing. However, if a rope and a piece of board are enough for children, then for respectable people a swing is needed more solidly. We bring to your attention the original swing chair. Equipped with a soft cushion, they are unlikely to leave anyone indifferent. Even the most respected members of the family will be happy to use them.

The swing chair consists of a seat, a backrest and two sidewalls-frames. They are connected by three wooden rods, to which the suspension cords are also attached.

When manufacturing, it is best to use bars and rods made of hardwood - beech or oak. They are both durable and have a beautiful texture, especially if, after a good sanding, they are covered with a transparent varnish.

Sidewall parts are joined together with screws and epoxy glue. To increase the rigidity of the frames, two reinforcing squares are installed on each.

The suspension can be made on any reliable rope, but it is better if it is a nylon cord Ø 6 ... 8 mm. In the upper part, it is necessary to provide strong metal rings for attaching the swing to the crossbar and, quite importantly, to protect the cable from chafing. By the way, you can hang such a chair not only in the garden, but also on the veranda or in the gazebo.

Rice. 1. Swing chair (click to enlarge): 1 - horizontal element of the sidewall (50x50x700 mm, 4 pcs.), 2 - connecting rod (Ø 25x800 mm, 3 pcs.), 3 - reinforcing square (4 pcs., 25x100x100 mm ), 4, 11 - vertical element of the sidewall (500x50x375 mm, 4 pcs.), 5 - element of the back frame (50x50x375 mm, 2 pcs.), 6 - element of the back and seat grille (Ø 25x580 mm, 13 pcs.), 7 - element of the seat frame (50x50x675 mm, 2 pcs.), 8 - suspension cord guide (Ø 25x100 mm, 2 pcs.), 9 - pin (Ø 10x70 mm, 4 pcs.), 10 - seat lock (Ø 25x680 mm) .

Additional comfort is created by a soft pillow. It is made in the form of an ordinary mattress: the cover is a bright durable fabric, the stuffing is hay or synthetic tow.

We recommend interesting articles Section Builder, home master:

▪ secret hallway

▪ Inflating the ball without a needle

▪ Water supply and sewerage for a country house

See other articles Section Builder, home master.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

Fundamentally new computer architecture 22.11.2013

Micron Technology has released a high-profile announcement declaring the development of "a fundamentally new computer architecture capable of performing high-speed, complex searches and analysis of complex, unstructured data streams."

The architecture is embodied in the accelerator Micron Automata Processor (AP), which is characterized by internal memory parallelism. This development is designed to radically improve the ability of computers in bioinformatics, image and video analysis, network security and other areas that are difficult for traditional processor architectures due to the need to process large amounts of complex, unstructured data.

Automata is built on the use of natural parallelism, previously unattainable by means of traditional architectures. Unlike ordinary CPUs, AP is a computing structure formed by tens, hundreds of thousands and even millions of processor elements interconnected into a specialized processor mechanism that is adaptable to solve specific problems and is capable of solving them with unsurpassed performance.

According to the manufacturer, the Automata Processor technology will make it possible to approach tasks that require extremely large computing resources, including genome analysis, from a new perspective.

Now Micron is trying to interest "ecosystem partners and research institutions" in its development. Tools for software developers to build, debug, test, and deploy AP applications should be available in 2014.

Other interesting news:

▪ 726 Series Accurate Multifunction Process Calibrator

▪ How dinosaurs ran

▪ UPS Panduit UPS003024024015 without batteries

▪ Fitness bracelets for cows

▪ Biometric terminals-readers Safran Sigma

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the site Biographies of great scientists. Article selection

▪ article Water supply and sewerage for a country house. Tips for the home master

▪ What is unique about the Umayyad Caliphate? Detailed answer

▪ May article. Legends, cultivation, methods of application

▪ article Refinement of the DFT in the RA3AO transceiver. Encyclopedia of radio electronics and electrical engineering

▪ article Electronic Antenna Switch. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews