Menu English Ukrainian russian Home

Free technical library for hobbyists and professionals Free technical library


ENCYCLOPEDIA OF RADIO ELECTRONICS AND ELECTRICAL ENGINEERING
Free library / Schemes of radio-electronic and electrical devices

Stand with a timer for a soldering iron. Encyclopedia of radio electronics and electrical engineering

Free technical library

Encyclopedia of radio electronics and electrical engineering / Ham Radio Technologies

Comments on the article Comments on the article

It happens that during installation or repair work, the soldering iron “rests” for a long time, lying on a stand. This leads to premature burnout of the sting. It will be possible to prevent this if at such moments less voltage is supplied to the soldering iron. And for this you need to equip the stand with an automatic machine, the diagram of which is shown in Fig. 1. Similar stands were proposed earlier in [1, 2].

Stand with timer for soldering iron

In the shown position of the contacts of the push-button switch SB1 and the contacts K1.1 of the relay K1, the soldering iron connected to the socket X1 is supplied with full supply voltage. This mode is necessary during soldering.

When the soldering iron is placed on the stand, the contacts of the pushbutton switch open. But the relay does not let go, because the timer comes into action - the charged capacitor C1 is slowly discharged through the resistor R2 and the emitter junction of the transistor. If the soldering iron is not used for about six minutes, the relay will release, contacts K1.1 will open. The voltage to the soldering iron will be supplied through the VD5 diode, due to which the power dissipated on it will decrease.

As soon as the soldering iron is removed from the stand, the contacts of the push-button switch will close, the relay will work and close the VD5 diode with its contacts. The soldering iron will again be supplied with full supply voltage.

Automation can be equipped with an existing stand. To do this, it is necessary to attach a push-button switch and a metal lever with a corner for a soldering iron tip to the front post (Fig. 2). When the soldering iron is removed, the lever must be securely lifted with the switch button.

Stand with timer for soldering iron

Relay K1 - RES9 passport RS4.529.029-08 or RS4.529.029-018. Capacitor C1 - K50-ZB, C2 - K50-24 or K50-33. In place of the VT1 transistor, you can install, in addition to that indicated on the diagram, any of the KT815, KT817, KT819 series, but the first two must be equipped with a small radiator

Literature

  1. Aristov A. Automatic soldering iron power regulator. - Radio, 1981, No. 12, p. 51.
  2. Lutskov V. Stand for a soldering iron. - Radio, 1982, No. 12, p. 53.

Author: M. Zakiyanov, Vyatskiye Polyany, Kirov region

See other articles Section Ham Radio Technologies.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Artificial leather for touch emulation 15.04.2024

In a modern technology world where distance is becoming increasingly commonplace, maintaining connection and a sense of closeness is important. Recent developments in artificial skin by German scientists from Saarland University represent a new era in virtual interactions. German researchers from Saarland University have developed ultra-thin films that can transmit the sensation of touch over a distance. This cutting-edge technology provides new opportunities for virtual communication, especially for those who find themselves far from their loved ones. The ultra-thin films developed by the researchers, just 50 micrometers thick, can be integrated into textiles and worn like a second skin. These films act as sensors that recognize tactile signals from mom or dad, and as actuators that transmit these movements to the baby. Parents' touch to the fabric activates sensors that react to pressure and deform the ultra-thin film. This ... >>

Petgugu Global cat litter 15.04.2024

Taking care of pets can often be a challenge, especially when it comes to keeping your home clean. A new interesting solution from the Petgugu Global startup has been presented, which will make life easier for cat owners and help them keep their home perfectly clean and tidy. Startup Petgugu Global has unveiled a unique cat toilet that can automatically flush feces, keeping your home clean and fresh. This innovative device is equipped with various smart sensors that monitor your pet's toilet activity and activate to automatically clean after use. The device connects to the sewer system and ensures efficient waste removal without the need for intervention from the owner. Additionally, the toilet has a large flushable storage capacity, making it ideal for multi-cat households. The Petgugu cat litter bowl is designed for use with water-soluble litters and offers a range of additional ... >>

The attractiveness of caring men 14.04.2024

The stereotype that women prefer "bad boys" has long been widespread. However, recent research conducted by British scientists from Monash University offers a new perspective on this issue. They looked at how women responded to men's emotional responsibility and willingness to help others. The study's findings could change our understanding of what makes men attractive to women. A study conducted by scientists from Monash University leads to new findings about men's attractiveness to women. In the experiment, women were shown photographs of men with brief stories about their behavior in various situations, including their reaction to an encounter with a homeless person. Some of the men ignored the homeless man, while others helped him, such as buying him food. A study found that men who showed empathy and kindness were more attractive to women compared to men who showed empathy and kindness. ... >>

Random news from the Archive

New Solid State Relays International Rectifier 16.06.2007

Compared to its peers and predecessors, the PVN012A family has half the AC on-state resistance (Rdd(on)) and 37,5% higher AC load capacity at 100% duty cycle.

The new relay series is also rated for the maximum impulse (overload) current. With low channel resistance and high current carrying capacity combined with a compact housing, the PVN012A relays outperform traditional electromechanical relays.

They occupy a smaller area, are rated for high isolation voltage between input and output, have a stable open resistance throughout the entire service life, high sensitivity and high reliability, and are free from contact bounce.

The new relays are rated for 20 V, with an on-state resistance of 50 mΩ AC and 15 mΩ DC. The current carrying capacity is 4 A AC and 6 A DC. The insulation test voltage between input and output is 4000 V. The new relays are available in lead-free 6-pin DIP and SOIC packages and on tape.

Other interesting news:

▪ Electric coupe-crossover Skoda Enyaq Coupe iV

▪ Kingmax M.2 SSDs

▪ SUV Ford Everest 2022

▪ Electric tug RSD-E Tug 2513

▪ Type MC33897 Single-Wire CAN Interface Transmitters

News feed of science and technology, new electronics

 

Interesting materials of the Free Technical Library:

▪ Telephony site section. Article selection

▪ Article by Arthur Rimbaud. Famous aphorisms

▪ article How did the pins appear? Detailed answer

▪ article Master of industrial training. Job description

▪ article Designs by M. Erofeev. Encyclopedia of radio electronics and electrical engineering

▪ article DC-DC converter on an integral timer, 12/40 volts 1 ampere. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

Name:


Email (optional):


A comment:





All languages ​​of this page

Home page | Library | Articles | Website map | Site Reviews

www.diagram.com.ua

www.diagram.com.ua
2000-2024