Menu English Ukrainian russian Home

Free technical library for hobbyists and professionals Free technical library


ENCYCLOPEDIA OF RADIO ELECTRONICS AND ELECTRICAL ENGINEERING
Free library / Encyclopedia of radio electronics and electrical engineering / Electrician

Section 2. Sewerage of electricity

Wiring. Wiring in the attic

Free technical library

Encyclopedia of radio electronics and electrical engineering / Rules for the installation of electrical installations (PUE)

Comments on the article Comments on the article

2.1.69. The following types of electrical wiring can be used in attic rooms:

  • open;
  • wires and cables laid in pipes, as well as protected wires and cables in sheaths made of fireproof or slow-burning materials - at any height;
  • unprotected insulated single-core wires on rollers or insulators (in the attic of industrial buildings - only on insulators) - at a height of at least 2,5 m; if the height to the wires is less than 2,5 m, they must be protected from touch and mechanical damage;
  • hidden: in walls and ceilings made of fireproof materials - at any height.

2.1.70. Open electrical wiring in the attic should be carried out with wires and cables with copper conductors.

Wires and cables with aluminum conductors are allowed in attic spaces: buildings with fireproof ceilings - when they are laid open in steel pipes or hidden in fireproof walls and ceilings; industrial buildings for agricultural purposes with combustible ceilings - when they are laid open in steel pipes with the exception of dust penetration into the pipes and junction (branch) boxes; threaded connections must be used.

2.1.71. The connection and branching of copper or aluminum cores of wires and cables in attic spaces should be carried out in metal junction (branch) boxes by welding, crimping or using clamps corresponding to the material, cross section and number of cores.

2.1.72. Electrical wiring in attic spaces made using steel pipes must also meet the requirements given in 2.1.63-2.1.65.

2.1.73. Branches from lines laid in the attic to electrical receivers installed outside the attics are allowed provided that the lines and branches are laid openly in steel pipes or hidden in fireproof walls (ceilings).

2.1.74. Switching devices in the circuits of lamps and other electrical receivers installed directly in attic spaces must be installed outside these premises.

See other articles Section Rules for the installation of electrical installations (PUE).

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

A New Way to Control and Manipulate Optical Signals 05.05.2024

The modern world of science and technology is developing rapidly, and every day new methods and technologies appear that open up new prospects for us in various fields. One such innovation is the development by German scientists of a new way to control optical signals, which could lead to significant progress in the field of photonics. Recent research has allowed German scientists to create a tunable waveplate inside a fused silica waveguide. This method, based on the use of a liquid crystal layer, allows one to effectively change the polarization of light passing through a waveguide. This technological breakthrough opens up new prospects for the development of compact and efficient photonic devices capable of processing large volumes of data. The electro-optical control of polarization provided by the new method could provide the basis for a new class of integrated photonic devices. This opens up great opportunities for ... >>

Primium Seneca keyboard 05.05.2024

Keyboards are an integral part of our daily computer work. However, one of the main problems that users face is noise, especially in the case of premium models. But with the new Seneca keyboard from Norbauer & Co, that may change. Seneca is not just a keyboard, it is the result of five years of development work to create the ideal device. Every aspect of this keyboard, from acoustic properties to mechanical characteristics, has been carefully considered and balanced. One of the key features of Seneca is its silent stabilizers, which solve the noise problem common to many keyboards. In addition, the keyboard supports various key widths, making it convenient for any user. Although Seneca is not yet available for purchase, it is scheduled for release in late summer. Norbauer & Co's Seneca represents new standards in keyboard design. Her ... >>

The world's tallest astronomical observatory opened 04.05.2024

Exploring space and its mysteries is a task that attracts the attention of astronomers from all over the world. In the fresh air of the high mountains, far from city light pollution, the stars and planets reveal their secrets with greater clarity. A new page is opening in the history of astronomy with the opening of the world's highest astronomical observatory - the Atacama Observatory of the University of Tokyo. The Atacama Observatory, located at an altitude of 5640 meters above sea level, opens up new opportunities for astronomers in the study of space. This site has become the highest location for a ground-based telescope, providing researchers with a unique tool for studying infrared waves in the Universe. Although the high altitude location provides clearer skies and less interference from the atmosphere, building an observatory on a high mountain poses enormous difficulties and challenges. However, despite the difficulties, the new observatory opens up broad research prospects for astronomers. ... >>

Random news from the Archive

High Speed ​​NFC Memory ST25DV 28.04.2018

A new series of ST2DV wireless NFC / I25C memory chips from STMicroelectronics complies with ISO15693 and NFC Type 5 standards. The main feature of the ST25DV is the Fast data transfer mode, which is implemented through an internal buffer of 256 bytes of RAM (Mailbox).

The microchip can be used both as a conventional dynamic NFC tag (NFC TAG, NDEF message support) and as an interface for wirelessly updating the firmware of the final product via the RFID protocol. In the latter version, it is the high-speed exchange mode that can significantly reduce the firmware download time. In a real experiment, it took about 32 seconds to load an image for STM405F110 with a size of 45 kb.

There are several variants of ST25DV04K, ST25DV16K and ST25DV64K chips available, with EEPROM memory capacity of 4/16/64 Kbps, respectively. Through the I?C interface, microcircuits can work with any microcontroller with a constant power supply. It is possible to interact with the ST25DV via the air interface even without power supply - the microcircuit receives energy for writing and reading data from the electromagnetic field of the reader. If necessary, the radio interface can be disabled via I?C. The internal EEPROM memory can be divided into 4 flexible areas with 64-bit password protection. The microcircuit can interact with both NFC-compatible smartphones and specialized 13,56 MHz RFID readers.

A separate GPO pin on the chip can inform the host of various events, such as RF field detection, air interface activity, or the availability of a message in Mailbox. Under certain conditions, the ST25DV implements Energy Harvesting technology, allowing the connected external circuitry to be powered by the energy of the RFID reader.

ST25DV NFC memory features:

Dynamic NFC tag ISO15693 and NFC Type 5;
Range up to 1 meter;
Capacity 1,2 and 8 kilobytes;
Password protection 64 bit;
Proprietary speed mode up to 53 Kbps;
1 million EEPROM write cycles;
Data storage up to 40 years;
Temperature range -40...125°C (SO8N and TSSOP8).

Other interesting news:

▪ Childhood addiction to social media leads to overeating

▪ The i beam tablet from NTT DoCoMo is controlled by sight

▪ Mouse left

▪ Plant lanterns

▪ What does the neural network see?

News feed of science and technology, new electronics

 

Interesting materials of the Free Technical Library:

▪ site section Electrical work. Article selection

▪ article Poor in spirit. Popular expression

▪ article What animal could photographers use as a light meter before its invention? Detailed answer

▪ auto electrician article. Job description

▪ article Stabilization of the mode of class AB amplifiers. Encyclopedia of radio electronics and electrical engineering

▪ article Powerful converter for powering household appliances, 100 watts. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

Name:


Email (optional):


A comment:





All languages ​​of this page

Home page | Library | Articles | Website map | Site Reviews

www.diagram.com.ua

www.diagram.com.ua
2000-2024