An example of a sample statement of obligation to assign the duties of a person responsible for electrical facilities

Free technical library

ENCYCLOPEDIA OF RADIO ELECTRONICS AND ELECTRICAL ENGINEERING
Free library / Encyclopedia of radio electronics and electrical engineering / Electrician

Appendix 1. An example of a sample statement of commitment to assign the duties of a person responsible for electrical facilities. Encyclopedia of radio electronics and electrical engineering

Free technical library

Encyclopedia of radio electronics and electrical engineering / Rules for the technical operation of consumer electrical installations (PTE)

Comments on the article

Sample

Assigning Responsibility to the Head of Department
safe operation of state energy supervision
electrical installations _____
______ signature, initials, surname
______ from __
name of the organization of the owner, head of the organization
______ _____
on ___ full name
FULL NAME. Passport: Series ____ No. _______
Agreed issued
Head of department Registration address
state energy supervision of residence ______
___________
(signature, initials, surname) _____
"__" 20 __ "__" __ 20 _ p>
MP

STATEMENT-COMMITMENT

In accordance with paragraph 1.2.4 of the Rules for the technical operation of electrical installations of Consumers, I ask you to agree on the assignment of responsibility for the safe operation of electrical installations located
name of company
by the address ______
for ______ manager, owner _______
cross out unnecessary
this object ___
FULL NAME. fully
I undertake to maintain and operate the electrical installation of the specified facility in accordance with the requirements of the current rules and other regulatory and technical documents.
I do not have electrical receivers with voltage higher than 380 V.
"__" __________ 20_
_
Signature of the head, owner
Checked:
Inspector of State Energy Supervision
__ //
stamp and signature Surname and initials of the inspector
MP
"__" _ 20 _
Instruction on ensuring the safe operation of the electrical installation received:
_______ //
signature Surname and initials
Conducted training:
_______ //
signature Surname and initials
"__" 20_

See other articles Section Rules for the technical operation of consumer electrical installations (PTE).

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

The world's tallest astronomical observatory opened 04.05.2024

Exploring space and its mysteries is a task that attracts the attention of astronomers from all over the world. In the fresh air of the high mountains, far from city light pollution, the stars and planets reveal their secrets with greater clarity. A new page is opening in the history of astronomy with the opening of the world's highest astronomical observatory - the Atacama Observatory of the University of Tokyo. The Atacama Observatory, located at an altitude of 5640 meters above sea level, opens up new opportunities for astronomers in the study of space. This site has become the highest location for a ground-based telescope, providing researchers with a unique tool for studying infrared waves in the Universe. Although the high altitude location provides clearer skies and less interference from the atmosphere, building an observatory on a high mountain poses enormous difficulties and challenges. However, despite the difficulties, the new observatory opens up broad research prospects for astronomers. ... >>

Controlling objects using air currents 04.05.2024

The development of robotics continues to open up new prospects for us in the field of automation and control of various objects. Recently, Finnish scientists presented an innovative approach to controlling humanoid robots using air currents. This method promises to revolutionize the way objects are manipulated and open new horizons in the field of robotics. The idea of controlling objects using air currents is not new, but until recently, implementing such concepts remained a challenge. Finnish researchers have developed an innovative method that allows robots to manipulate objects using special air jets as "air fingers". The air flow control algorithm, developed by a team of specialists, is based on a thorough study of the movement of objects in the air flow. The air jet control system, carried out using special motors, allows you to direct objects without resorting to physical ... >>

Purebred dogs get sick no more often than purebred dogs 03.05.2024

Caring for the health of our pets is an important aspect of the life of every dog owner. However, there is a common assumption that purebred dogs are more susceptible to diseases compared to mixed dogs. New research led by researchers at the Texas School of Veterinary Medicine and Biomedical Sciences brings new perspective to this question. A study conducted by the Dog Aging Project (DAP) of more than 27 companion dogs found that purebred and mixed dogs were generally equally likely to experience various diseases. Although some breeds may be more susceptible to certain diseases, the overall diagnosis rate is virtually the same between both groups. The Dog Aging Project's chief veterinarian, Dr. Keith Creevy, notes that there are several well-known diseases that are more common in certain breeds of dogs, which supports the notion that purebred dogs are more susceptible to disease. ... >>

Random news from the Archive

Eternal paint based on plasmonic pixels 04.06.2016

A team of researchers from the University of Melbourne has developed a paint made from metal nanoparticles - plasmonic pixels - that will never fade in the sun.

A plasmonic pixel is a very small piece of metal. There are many very mobile electrons in any metal, and when light acts on a metal nanoparticle, the photon energy slightly shifts the electrons away from their nuclei, creating negative and positive poles for a short time. The forces of Coulomb attraction bring the electrons back into place. This process is repeated countless times and is called plasmon resonance. It causes the nanoparticles (and the material made from them) to absorb electromagnetic waves with certain characteristics - due to this, the material from the plasmonic pixels acquires a color visible to the eye.

The use of plasmonic pixels as a coloring agent has so far encountered a number of difficulties - in particular, the number of colors available was limited, and there was also no way to give a pixel a permanent specific color.

The new plasmonic pixel format allows you to create more than 2000 colors and shades. Scientists used tiny antennas made of aluminum: the distance between them determines the saturation of the color, and the hue is determined by the length of the antenna. With the size, too, everything is getting better: we managed to make a picture with a size of 1,5 x 1,5 cm - this is much more than similar techniques allowed before. And the resolution of the image is so high that the human eye cannot see the distance between the pixels.

Eternal paint based on plasmonic pixels can be used to paint cars, buildings and other large surfaces.

Other interesting news:

▪ DJI Osmo Action Camera

▪ Connected car from Bosch

▪ 868MHz wireless PIR sensor on the new CC1310 radio

▪ The lifetime of a free neutron has been measured

▪ Moidodyr for shopping carts

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ site section Lightning protection. Article selection

▪ article Beauty is a terrible force! Popular expression

▪ article How did the agave get its name? Detailed answer

▪ article Type-setter of facing materials for furniture. Standard instruction on labor protection

▪ article Anti-vandal protection of the lamp. Encyclopedia of radio electronics and electrical engineering

▪ article Disappearing map. Focus secret

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews