A simple field indicator. Encyclopedia of radio electronics and electrical engineering
Encyclopedia of radio electronics and electrical engineering / Measuring technology
Comments on the article
The signal received by the WA antenna is detected by the VD1 diode, and the selected low-frequency signal is amplified by the DA1 chip. The power supply of the microcircuit is unipolar. The gain is controlled by a variable resistor R5. At the output of the device, a pointer indicator is connected for visual control of the level and radiation or headphones for working in the monitor mode.
The pointer measuring head must be with a total deflection current of 1 mA and a loop resistance of at least 1 kOhm. It is desirable to use a microcircuit with field-effect transistors at the input, such as K140UD8.
Diode VD1 is necessarily germanium, type D9, GD 507.
Antenna WA - copper wire 30 cm long.
See other articles Section Measuring technology.
Read and write useful comments on this article.
<< Back
Latest news of science and technology, new electronics:
Machine for thinning flowers in gardens
02.05.2024
In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers.
... >>
Advanced Infrared Microscope
02.05.2024
Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>
Air trap for insects
01.05.2024
Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>
| Random news from the Archive prominence model
03.08.2000
A model of solar prominences has been implemented at the Department of Applied Physics of the California Institute of Technology (USA).
Prominences are plasma - a hot gas of free electrons and positive ions. For a long time it was not known why these emissions of the solar atmosphere take such a variety of forms. It is now believed that the shape, size and speed of prominences (and they sometimes reach the Earth) are determined by the interaction of magnetic fields and electric currents in a conducting plasma.
Physicists have simulated the development of a prominence by passing a current of about 6000 volts and a force of up to 60 kiloamperes through the plasma in a vacuum chamber, simultaneously applying a magnetic field that is several thousand times more intense than the Earth's magnetic field.
|
Other interesting news:
▪ Beavers are changing Alaska's climate
▪ Origins of human speech found
▪ Different types of trees affect the climate in different ways.
▪ Panasonic Lumix S5
▪ Bionic eye saves from blindness
News feed of science and technology, new electronics
Interesting materials of the Free Technical Library:
▪ site section Voltage converters, rectifiers, inverters. Article selection
▪ article How young we were. Popular expression
▪ Why were people afraid of eclipses in the past? Detailed answer
▪ Tornado article. Tourist tips
▪ article Liquid level sensor. Encyclopedia of radio electronics and electrical engineering
▪ article Converter for powering a two-phase asynchronous electric motor. Encyclopedia of radio electronics and electrical engineering
Leave your comment on this article:
All languages of this page
Home page | Library | Articles | Website map | Site Reviews
www.diagram.com.ua
2000-2024
Arabic
Bengali
Chinese
English
French
German
Hebrew
Hindi
Italian
Japanese
Korean
Malay
Polish
Portuguese
Spanish
Turkish
Ukrainian
Vietnamese