Menu English Ukrainian russian Home

Free technical library for hobbyists and professionals Free technical library


FACTORY TECHNOLOGIES AT HOME - SIMPLE RECIPES
Free library / Directory / Factory technology at home - simple recipes

Toothpaste. Simple recipes and tips

Factory technologies - simple recipes

Directory / Factory technology at home - simple recipes

Comments on the article Comments on the article

The basis ofslaughter pastes is purified chalk with the addition of a small amount of soap powder, as well as magnesium carbonate. The addition of orris root is also recommended, as it gives the pastes a pleasant softness. All parts that make up the paste in powder form must be sifted through the finest sieve. Glycerin or honey is added to most pastes. For flavoring use mainly mint, rose and anise oil.

The pastes are in most cases made of a light pink color, and the coloring is carmine or pink aniline dye, which, of course, must be completely harmless, such as rhodamine, magenta and eosin. In addition, medicines such as chinosol, salicylic acid, formalin, thymol, etc. are added to toothpastes.

The paste should contain glycerin and soap. Glycerin prevents the mass from drying out, soap prevents solids from settling. If you want the paste not to lather, use a poorly foaming soap. The soapy aftertaste, if noticeable at all, is masked by a sufficient amount of mint oil. A very pleasant and refreshing combination of peppermint oil with a little lemon oil.

Glycerin must be of the best quality and free from acids and lime.

Carbon-calcium salt (chalk) should be used only the lightest, in order to avoid separating it from the liquid parts.

Magnesia carbonate should not be used in soap pastes, since it is ten times more soluble than calcium carbonate, as a result of which, in the presence of soap, it can give an insoluble magnesian soap. In the same pastes where there is no soap, magnesium carbonate gradually enters a double compound with calcium carbonate (known in nature as dolomite).

In tooth powders, on the contrary, magnesia carbonate can be used to increase the volume.

Soap in toothpastes has a different purpose: it must protect the paste, as already indicated, from the precipitation of solid substances, make the mass homogeneous and give it the consistency of a paste.

Soaps or their fatty acids do not all react in the same way to lime and magnesia compounds. Coconut soaps are stable in this regard and are therefore the best soaps for hard and sea water.

Coconut potassium soap is the most perfect toothpaste soap. Pure neutral coconut soap also has the property that, when added in small amounts to glycerin, it increases its consistency.

Coconut potash soap is obtained by washing coconut oil with caustic potash. Needless to say, it should not contain excess caustic potash. In addition, to achieve a completely homogeneous mass, the paste should be passed through a roller mill. If the paste is processed in a kneader and passed through a roller mill, water and glycerin impurities can be reduced to a minimum.

Toothpastes are prepared as follows. Firstly, it is certainly necessary to have a kneading machine such as a kneading machine for this purpose, since quite dry pastes cannot be kneaded well by hand. Downloaded carefully sift through a fine sieve all the individual powdery components of the paste to separate impurities. Liquid ingredients such as glycerin, honey, etc., are best warmed up a little so that they do not become thick. It is recommended to stir the paint immediately with liquid components so that it is evenly distributed in the mass. Then a little mixture of powders is poured into the machine and a small amount is stirred, but then the liquid components are immediately poured into the machine and the rest of the powder is added little by little. When everything is well mixed, add perfume, close the lid and stir well again. After a short time, the paste is ready and can be removed from the machine, after which it is filled into tubes using a special machine.

To determine the amount of water to add to the paste, you need to know how high the water content of the soap is. The best soap-free toothpastes are made with pure glycerin without the addition of water. Peppermint oil or a combination of peppermint oil with lemon or anise oil is best for flavoring.

Here are some tried and tested recipes. toothpastes.

Toothpaste "Kalodont"

Mix 100 parts of purified chalk, 100 parts of soap powder and glycerin as much as needed to obtain a soft paste. For aromatization, 2 parts of mint oil are added, and for coloring, 0,5 parts of fuchsin or eosin.

Mint Toothpaste

Mix 500 parts of purified chalk, 200 parts of glycerin soap powder as much as needed to obtain a soft paste. For flavoring add 10-15 parts of mint oil. For coloring take 10 parts of chlorophyll and 50 parts of ether.

violet toothpaste

Mix 100 parts of purified chalk, 40 parts of orris root, 40 parts of soap powder and glycerin as much as needed to obtain a soft paste. For aromatization, 4 parts of violet extract are taken, and for coloring, 0,5 parts of methyl violet.

pink toothpaste

Mix 500 parts of purified chalk, 200 parts of soap powder and glycerin as much as needed to obtain a soft paste. For aromatization, 3 parts of rose oil are taken, and for coloring, 0,5 parts of fuchsin or eosin.

honey toothpaste

Mix 150 parts of purified chalk, 150 parts of orris root and bee honey as much as needed to obtain a soft paste. For flavoring, take the first part of anise oil.

thymol toothpaste

Mix 600 parts of purified chalk, 200 parts of orris root, 200 parts of soap powder and glycerin as much as needed to obtain a soft paste. For aromatization, 10 parts of thymol are taken, and for coloring, 0,5 parts of rhodamine.

Menthol toothpaste

Mix 40 parts of purified chalk, 20 parts of soap powder, 10 parts of magnesium carbonate and glycerin as much as needed to obtain a soft paste. For flavoring add 2 parts of menthol.

Salicylic toothpaste

Mix 150 parts of talc, 150 parts of soap powder, 20 parts of salicylic sodium and glycerin as much as needed to obtain a soft paste. For flavoring, add 8 parts of mint oil.

Perhydrol toothpaste

Mix 25 parts of purified chalk, 5 parts of soap powder, 1 part of hydrogen peroxide and bee honey as much as needed to obtain a soft paste. For flavoring, add 1 part of mint oil.

Formalin toothpaste

Mix 500 parts of purified chalk, 60 parts of pumice powder, 8 parts of formaldehyde and glycerin as much as needed to obtain a soft paste. For flavoring, add 5 parts of mint oil.

Salol toothpaste

Mix 700 parts of purified chalk, 200 parts of soap powder, 20 parts of salol and glycerin as much as needed to obtain a soft paste. For flavoring, add 8 parts of mint oil.

pumice toothpaste

Mix 600 parts of purified chalk, 200 parts of pumice (in powder) and honey as much as needed to obtain a soft mass. For aromatization, 8 parts of mint or anise oil are added, and for coloring, 0,5 parts of eosin.

Mint Toothpaste

  • Chalk purified 1 kg;
  • Soaps on coconut oil, white, best quality 1,3 kg;
  • Wine alcohol 0,5 l;
  • Benzoic acid 120 g;
  • Eucalyptus oil 85 g;
  • Peppermint oil 100 g;
  • Saccharin from 5 to 20 g;
  • Glycerin 600 g.

First mix alcohol, glycerin, eucalyptus and mint oils. Other substances are mixed separately. Both compositions are mixed until a mass of appropriate density is obtained. If necessary, glycerin and alcohol can be added to obtain a more liquid paste. Pack in tin tubes.

Menthol toothpaste

  • Gelatin 28 g;
  • Castile soap (in powder) 56 g;
  • Saccharin 0,6 g;
  • Water 0,5 l;
  • Glycerin 1 l;
  • Menthol 3,6 g;
  • Eucalyptol 3,5 g;
  • Pear oil 7 g;
  • Carmine 5 drops.

Leave the gelatin overnight in water, squeeze it out in the morning and melt over the fire. Dissolve soap and saccharin in water, mix gelatin with solution. Separately mix when heated glycerin, menthol, eucalyptol, carmine pear oil. With stirring, both liquids are drained and 340-150 g of purified chalk is added to each liter of the resulting liquid, after which it is poured into tubes, the solution becomes thick. Depending on the amount of chalk, the paste is obtained in different thicknesses.

Toothpaste

  • Carbon-calcium salt 1 kg;
  • Violet root 1 kg;
  • Sugar 1 kg;
  • Water 500 g;
  • Krappovy varnish 30 g;
  • Lavender oil 10 g;
  • Muscat oil 10 g;
  • Clove oil 10 g;
  • Peppermint oil 30 g;
  • Rose oil 10 g.

Toothpaste "Kalodont"

  • Good neutral soap 200 g;
  • Glycerin 300 g;
  • The finest elutriated chalk 500 g.

Soap, glycerin and chalk dyed pink with some harmless paint are mixed, mint oil is added for the smell and so much water is added to make a viscous dough. Tubes are filled with this dough.

Author: Korolev V.A.

We recommend interesting articles Section Factory technology at home - simple recipes:

▪ Finishing locksmith products

▪ Soaps made from solidified (hydrogenated) liquid fats and oils

▪ Enameling cast iron and cast iron utensils

See other articles Section Factory technology at home - simple recipes.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

Meizu 10 mAh power bank with fast charging technology 19.07.2015

Meizu has introduced a new external battery with a capacity of 10 mAh.

A distinctive feature of the battery is support for mCharge fast charging technology. Moreover, the support is two-way. That is, the battery itself can be charged much faster than other similar solutions, and the MX5 smartphone, which supports mCharge, can be charged up to 58% in half an hour or completely in 83 minutes.

The device uses lithium polymer cells manufactured by Amperex Technology Limited, which supplies batteries to Apple.

The dimensions of the solution are 143,5 x 75,4 x 17,4 mm. The cost of the battery is about $25.

Other interesting news:

▪ Green Revolution in the Oceans: Phytoplankton Rise

▪ Panel thermostats series 7T81 from Finder

▪ Neutrino mass measured

▪ Mobile phone without battery

▪ Hydrodynamic analogue of radiation from oil

News feed of science and technology, new electronics

 

Interesting materials of the Free Technical Library:

▪ section of the site Power supply. Article selection

▪ article Quick Freeze. History of invention and production

▪ article Which company paid off its debts at the dawn of its existence by winning at the casino? Detailed answer

▪ papaya article. Legends, cultivation, methods of application

▪ article The simplest programmer for microcontrollers. Encyclopedia of radio electronics and electrical engineering

▪ Article Magic name. Focus Secret

Leave your comment on this article:

Name:


Email (optional):


A comment:





All languages ​​of this page

Home page | Library | Articles | Website map | Site Reviews

www.diagram.com.ua

www.diagram.com.ua
2000-2024