Mordant for imitation of mahogany. simple recipes

Free technical library

FACTORY TECHNOLOGIES AT HOME - SIMPLE RECIPES
Free library / Directory / Factory technology at home - simple recipes

Mordant for imitation of mahogany. Simple recipes and tips

Factory technologies - simple recipes

Directory / Factory technology at home - simple recipes

Comments on the article

Here are some recipes mordant to simulate mahogany. The wood intended for mordant must be well dried, and the application of mordant is best done with a brush, which must be immediately washed and dried after each use.

1) A very beautiful and durable mordant is prepared by mixing 500 g of finely ground sandalwood, 30 g of potash and 1,5 liters of water in a flask. The mixture is left to stand in a warm place for a week, shaking frequently. The liquid is then filtered through a cloth and stored in a suitable vessel until consumed. In another flask, 1,5 g of alum are dissolved by heating in 30 liters of water, filtered and stored. The object intended for etching is treated with the heated first solution several times until the desired color is obtained, after which it is covered with a second, also heated liquid. Mixing both liquids in one should not be. After drying, the etched object is wiped with linseed oil with a cloth.

2) Recently, sandalwood is often replaced with aniline dyes that are soluble in water. The advantage of aniline paints lies in their high covering power. To imitate mahogany, Ponceau paint is very suitable. 3 g of Ponceau aniline are dissolved in 100 liters of water. This solution is applied to the wood to be painted once or twice, depending on the color that is desired.

Author: Korolev V.A.

We recommend interesting articles Section Factory technology at home - simple recipes:

▪ Mordant for wooden smoking pipes

▪ Waxes

▪ Chinese ink

See other articles Section Factory technology at home - simple recipes.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

Mobile supercomputer from NVidia 13.04.2014

The Jetson TK computer platform, created by NVidia, is based on the Nvidia Tegra K1 single-chip system with an integrated 192-core GPU based on the Kepler architecture. The new solution represents a more advanced version of the NVidia Jetson platform based on Tegra 3. The Jetson TK1 is planned to become a universal solution for the development of embedded machine vision systems, as well as navigation and obstacle detection systems for on-board electronics, unmanned aerial vehicles, robots and medical equipment.

The dimensions of the novelty are 12,7x12,7 cm. In a square with a side of about 13 cm, the developers fit 2 GB of memory and a number of I / O tools, including USB 3.0, HDMI 1.4, Gigabit Ethernet, SATA, miniPCIe and SD slots, an interface for CSI-2 cameras, additional ports for access to DisplayPort and LVDS display options, SPI-based touch control panel, audio input and output.

NVidia estimates the performance of new items at 326 gigaflops. According to the developer, the indicator is "3 times higher than that of existing analogues." "With the Jetson TK1, embedded technology is one step closer to a future where machines interact with each other and simultaneously adapt to environmental conditions in real time," commented Ian Buck, Vice President, GPU Computing Software Division. at NVidia, "This platform allows developers to bring computer vision to handheld devices, giving low-powered devices superpowers."

Chris Jones, director of strategic development for iRobot Corp, a US company specializing in the development, manufacture and sale of robotics, describes the future of the platform: "Because the Jetson TK1 combines low power consumption and high performance, this solution be used to create robots with autonomous navigation that will be able to quickly recognize objects."

The pre-order price of the platform in Europe and the USA is $192. The kit includes 2 GB of RAM, which can be upgraded up to 4 GB (Tegra K1 technically supports up to 8 GB). The package also includes C/C++ VisionWorks software based on the Nvidia CUDA architecture. Implemented support for OpenGL 4.4.

Other interesting news:

▪ Plasma based water purification system

▪ The first wooden satellite will be sent into space

▪ Improved computer speech recognition

▪ black tomatoes

▪ Toyota BLAID: the wearable device of the future for the blind

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ site section Field strength detectors. Article selection

▪ article Everything will pass. Popular expression

▪ article What is protein? Detailed answer

▪ article Director of the sports club. Job description

▪ article Colored cements. Simple recipes and tips

▪ article Rubbing a coin into the hand. Focus secret

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews