OCCUPATIONAL SAFETY AND HEALTH
Instructions for labor protection when working at a plant for bottling viscous products and sealing plastic bags Occupational Safety and Health / Standard instructions for labor protection Safe Operation 1. General safety requirements 1.1. Physically healthy people who do not have medical contraindications, who have undergone industrial training, introductory and primary briefing at the workplace, and must also undergo hygienic training and pass a test once every 1 years according to the established program, should be allowed to work on pouring viscous products and sealing plastic bags . 1.2. Filling personnel for viscous products must know:
1.3. Personnel admitted to work must be provided and familiarized against signature with the instruction on labor protection 2. Safety requirements before starting work 2.1. Wear appropriate clothing according to the rules. clothes. 2.2. Check the presence and serviceability of the grounding of the AR-1 filler, make sure that it is in good condition and test it at idle, inform the management if damage or malfunction is detected. 2.3. Check that the aisles are not obstructed. 2.4. To ensure safe operation, it is necessary to carry out a weekly preventive inspection of devices and equipment that do not have a regulated maintenance period. 2.5. Movable and rotating parts of the equipment must have protective covers and guards that exclude the possibility of injury to operating personnel. 3. Safety requirements during work 3.1. Do only the work assigned to you 3.2. Be careful not to distract yourself and do not distract others from work. 3.3. Do not allow unauthorized persons to operate the AP-1 unit. 3.4. Starting the AR-1 installation to work, making sure that there is no danger to others. 3.5. If a malfunction is detected in the operation of the AP-1 unit, stop it, inform the master. Include in the operation of the AP-1 installation only in the presence of a master and a locksmith. 3.6. Cleaning, washing, AP-1 installations should be carried out only when the equipment is completely stopped and the electric current is turned off. 3.7. Keep the workplace clean, clean up spilled liquids in a timely manner, and eliminate the slipperiness of the floor. 4. Safety requirements in emergency situations 4.1. If voltage is detected on the metal parts of the equipment (sensation of electric current), the electric motor is running in two phases (humming), the ground wire is broken, you should stop the machine and immediately report this to the management. 4.2. If a malfunction is detected in the operation of the equipment, a spontaneous stop, an accident, it is necessary to turn off the power supply, inform the responsible person about this and do not turn it on until the malfunction is eliminated. 4.3. Seek medical attention if injured. item and notify management. 4.4. If a fire is detected, it is necessary to call the fire brigade by phone 01, notify the management. 5. Safety requirements at the end of work 5.1. Upon completion of work, all equipment and mechanisms are transferred to a position that excludes the possibility of their launch by unauthorized persons, the power supply is turned off, the equipment is wiped. Sanitization, disassembly, cleaning and washing are carried out only after disconnecting the equipment from the mains. 5.2. Take off overalls, report all remarks in the operation of the installation to your supervisor, do not repair the equipment yourself, take a shower. We recommend interesting articles Section Standard instructions for labor protection: ▪ Installer of construction machines and mechanisms. Standard instruction on labor protection ▪ Work with toxic, combustible substances, poisons, drugs. Standard instruction on labor protection See other articles Section Standard instructions for labor protection. Read and write useful comments on this article. Latest news of science and technology, new electronics: Artificial leather for touch emulation
15.04.2024 Petgugu Global cat litter
15.04.2024 The attractiveness of caring men
14.04.2024
Other interesting news: ▪ Abandoned mines to save energy ▪ World's first laptop thinner than 1 centimeter ▪ Electronic motion sickness in self-driving cars ▪ Organic CMOS image sensor with electronic sensitivity control in NIR News feed of science and technology, new electronics
Interesting materials of the Free Technical Library: ▪ section of the website Audiotechnics. Article selection ▪ article by Marcus Porcius Cato (the Younger). Famous aphorisms ▪ article Who inspired your future savior to work in the special services? Detailed answer ▪ article Work on three-knife paper-cutting machines. Standard instruction on labor protection ▪ article Without cutting the ropes. Focus secret
Leave your comment on this article: All languages of this page Home page | Library | Articles | Website map | Site Reviews www.diagram.com.ua |