OCCUPATIONAL SAFETY AND HEALTH
Instructions on labor protection for the storekeeper of the repair and construction shop. Full document Occupational Safety and Health / Standard instructions for labor protection 1. General safety requirements 1.1. Individuals who have passed:
Persons who do not have medical contraindications may be accepted to perform the duties of a warehouse keeper. 1.2. The storekeeper must be re-instructed on labor safety at the workplace at least every three months. 1.3. The storekeeper is obliged:
1.4. The storekeeper must:
1.5. The storekeeper must know and follow the rules of personal hygiene. Eat, smoke, rest only in specially designated areas and places. Drink water only from specially designed installations. 1.6. The main hazardous and harmful production factors under certain circumstances can be:
1.7. The storekeeper must know that goods by weight are divided into 3 categories:
2. Safety requirements before starting work 2.1. Wear the appropriate clothing. 2.2. Make sure that the warehouse space is adequately lit, that the floors and coatings are clean, free of potholes, and that the aisles and driveways are not cluttered with foreign objects. 2.3. Check portable platforms and stationary racks. By external inspection, make sure that they are in good condition, stable and durable. 2.4. Check the serviceability of portable ladders and ladders. 2.5. Check the presence of anti-slip devices on the stairs (metal shoes, rubber pads, etc.), and also whether the steps of the stairs are firmly embedded in the longitudinal bars. 2.6. Check the presence of metal ties on the stairs (there must be at least two of them). 2.7. Check on the sliding stepladders the presence and serviceability of devices that exclude the possibility of spontaneous extension. 2.8. Check if the bowstrings of the stairs are fastened with tie bolts every meter. 2.9. Check the availability of trash bins and special metal boxes for used cleaning material. 2.10. Check the availability and serviceability of fire fighting equipment. 2.11. If any deficiencies are found, take corrective action. 3. Safety requirements during work 3.1. Warehousing of goods shall be carried out, if possible, in a mechanized way using lifting and transport equipment and small-scale mechanization, observing the safety requirements set forth in the relevant labor protection instructions. 3.2. Before placing items on racks, make sure that the racks are strong enough. 3.3. It is necessary to ensure that the mass of goods placed on the rack does not exceed the permissible load on the racks. 3.4. Place items on the racks evenly, not in bulk, at a sufficient distance from the edge 3.5. Accept for storage operated items (parts) cleaned of dirt, gasoline, oil. 3.6. Store electrical equipment separately from other equipment, assemblies, parts. 3.7. When stacking or removing items from the upper shelves, you must use stepladders. Store light items on the top shelves. 3.8. Do not litter aisles in the warehouse and access roads to the warehouse. 3.9. When unpacking, packing and stacking property, use a serviceable nail puller, hammer, tongs, do not scatter nails and boards with nails. 3.10. Use gloves when unpacking and packing stitching and materials. 3.11. Do not store packaging material in the warehouse. 4. Safety requirements in emergency situations 4.1. In case of an emergency, suspend the release of products, leave the danger zone, and, if necessary, remove people who are nearby. 4.2. When spilling gasoline, diesel fuel, oil, acids, fill this place with sand, then remove the sand with a scoop and brush, after which the spill site is neutralized with soda. 4.3. In the event of a fire, immediately call the fire brigade by phone 01, remove people and, if possible, combustible substances to a safe place, and start extinguishing the fire with the available primary fire extinguishing equipment. Report the fire to management. Provide first aid to victims in case of injury and call an ambulance or send the victim to a first-aid post, inform the head. 5. Safety requirements at the end of work 5.1. Tidy up the workplace. 5.2. Places of production of works should be subjected to thorough cleaning, washing. 5.2. Remove and put away protective clothing and other protective equipment in the place provided for this. 5.3. Wash your face and hands, take a shower if possible. 5.4. Warn the shifter about the shortcomings noticed and not eliminated during the work. We recommend interesting articles Section Standard instructions for labor protection: ▪ Locksmith-repairman of the repair and procurement workshop. Standard instruction on labor protection ▪ Doorman. Standard instruction on labor protection ▪ Duty electrician. Standard instruction on labor protection See other articles Section Standard instructions for labor protection. Read and write useful comments on this article. Latest news of science and technology, new electronics: Artificial leather for touch emulation
15.04.2024 Petgugu Global cat litter
15.04.2024 The attractiveness of caring men
14.04.2024
Other interesting news: ▪ GeForce GTX 1650 Low Profile Accelerators ▪ How do ants deal with traffic jams? News feed of science and technology, new electronics
Interesting materials of the Free Technical Library: ▪ site section Batteries, chargers. Article selection ▪ article Soar in the empyrean. Popular expression ▪ article Why do mom and dad sound similar in most languages of the world? Detailed answer ▪ Article Geneticist. Job description ▪ article White tower from a chicken egg. Focus Secret
Leave your comment on this article: All languages of this page Home page | Library | Articles | Website map | Site Reviews www.diagram.com.ua |