OCCUPATIONAL SAFETY AND HEALTH
Instructions for labor protection when working with a manual scythe. Full Document Occupational Safety and Health / Standard instructions for labor protection Safe Operation 1. General requirements for labor protection 1.1. Employees of the depot who have the appropriate training and experience in such work are allowed to independently perform work on mowing grass with a scythe. 1.2. Admission to independent work is carried out after an internship for 2 shifts, receiving an initial briefing at the workplace and testing safety knowledge. 1.3. All persons hired must comply with the Internal Regulations, the fire regime, the rules of personal hygiene and industrial sanitation. Do not work in dirty overalls. Wash hands with warm water and soap. 1.4. Drinking alcoholic beverages on the premises is prohibited. Being on the territory of the enterprise in a state of toxic, alcoholic, narcotic poisoning is prohibited. 1.5. Smoking on the territory is prohibited except in places specially equipped for this. 1.6. A person working with a scythe needs to be aware that in the process of work there is a possibility of injury by the cutting parts of the scythe and small objects (chips, stones) flying out from under the knife. 1.7. The issuance of overalls, safety shoes and other PPE is carried out according to the main profession. 1.8. All workers in the depot must be trained in the methods of releasing the victim from the effects of electric current and be able to provide first aid. In case of electric shock, immediately release the victim from the action of the electric current, and then, if the victim has stopped breathing, give him artificial respiration, in the absence of a pulse, do an indirect heart massage until first aid arrives or full restoration of vital functions. In case of injuries, it is necessary to be able to stop bleeding, and in case of dislocations and fractures, it is necessary to be able to apply splints. In all cases, along with the provision of first medical assistance, if necessary, call tel. "103" ambulance brigade. 1.9. In each accident that a worker has witnessed, it is necessary to provide first aid to the victim, call a doctor or help deliver the victim to a health center, report the incident to the management of the shop. 1.10. If the accident occurred with the employee himself, it is necessary, if possible, to contact the health center, inform the administration or ask someone from the people around to do it. 1.11. For violation of this instruction and certain clauses, the perpetrators are personally liable and may be subject to disciplinary, administrative or criminal liability, depending on the degree of guilt and consequences. 2. Labor protection requirements before starting work 2.1. Put on overalls, wear a hat and personal protective equipment. 2.2. Get a job assignment from your immediate supervisor. 2.3. Inspect the workplace, it must be cleared of debris (cans, papers, glass, etc.). 2.4. The tool must be prepared for work. 2.5. If necessary, rivet a braid, while observing all safety measures so as not to cut yourself. 2.6. The wooden base of the spit should be free of gaps, roughness, splits. 2.7. It is forbidden to work barefoot and in open shoes. 2.8. Wear only closed, durable shoes, long trousers, protect your head from the sun's rays (put on a cap, hat) 2.9. Conduct an external inspection of the spit and make sure that all parts and elements are fastened in good condition and are secure. Do not use the scythe until the damage is repaired. 3. Labor protection requirements during work 3.1. Keep the goat at a distance. 3.2. Make sure that the scythe does not come into contact with foreign objects; 3.3. Take a stable position and maintain stability in the process of work. 3.4. While working, hold the scythe by the front handle and the upper part. In the process of work, make sure that the cutting part does not fly off the wooden handle. 3.5. Unauthorized persons must be at a distance of at least 5 meters from the place where the scythe is used. 3.6. When moving to another area of work, carry the scythe up with the metal part, with the sharp end down. 3.7. DO NOT work without personal protective equipment. 3.8. As the braid becomes blunt, riveting it, observing safety measures. 3.9. Use the scythe only for its intended purpose. 3.10. When working with a sickle, pick up small bunches of grass, cut the grass, taking precautions so as not to get hurt. 3.11. While chopping bushes with an ax, in order to avoid injuring the hands, hold the stems of the cut down plants above the logging site, but not lower than 40-50 cm, bending them a little. 4. Labor protection requirements in emergency situations 4.1. If there is a danger to the health and life of workers, the ongoing work must be stopped. 4.2. In the event of an emergency - injury, sudden illness, poisoning - it is necessary to stop the work, report the incident to the master, the head of the shop, the administration, take urgent measures to help the victim and begin to eliminate the emergency. 4.3. Ensure the safety of the environment of the accident. 4.4. In case of injury or sudden illness, provide first aid. Inform the foreman, the head of the workshop, his deputy about what happened. 4.5. In the event of a fire, take measures to eliminate it, inform the fire department and the administration. 5. Labor protection requirements at the end of work 5.1. Tidy up the instrument. Thoroughly clean the entire surface of the braid and inspect it for damage. Clean the outer surface of the spit with a brush. 5.2. Wipe off residual moisture with a soft cloth. 5.3. Remove the scythe in a specially designated place - a dry, well-ventilated area. 5.4. Take off overalls and PPE, put it in a specially designated closet. 5.5. Notify the master of the completion of work. We recommend interesting articles Section Standard instructions for labor protection: ▪ Mobile compressor driver with electric motor. Standard instruction on labor protection ▪ Melting and bottling of printing alloy. Standard instruction on labor protection See other articles Section Standard instructions for labor protection. Read and write useful comments on this article. Latest news of science and technology, new electronics: Artificial leather for touch emulation
15.04.2024 Petgugu Global cat litter
15.04.2024 The attractiveness of caring men
14.04.2024
Other interesting news: ▪ The implant will return a person to tactile sensations ▪ Hybrid trash can with slot machine ▪ A device that decomposes sounds without the help of digital technology News feed of science and technology, new electronics
Interesting materials of the Free Technical Library: ▪ site section And then an inventor (TRIZ) appeared. Article selection ▪ article Rozanov Vasily Vasilyevich. Famous aphorisms ▪ article What happens to vision if a person wears glasses that flip the image? Detailed answer ▪ article Running in and testing of repaired machines. Standard instruction on labor protection ▪ article Car battery voltage indicator. Encyclopedia of radio electronics and electrical engineering ▪ article Surprises feedback. Encyclopedia of radio electronics and electrical engineering
Leave your comment on this article: All languages of this page Home page | Library | Articles | Website map | Site Reviews www.diagram.com.ua |