Labor protection instruction for a transporter with a cut

Free technical library

OCCUPATIONAL SAFETY AND HEALTH
Free library / Occupational Safety and Health / Standard instructions for labor protection

Instructions for labor protection for a transporter with a cut. Full Document

Occupational Safety and Health

Occupational Safety and Health / Standard instructions for labor protection

Comments on the article

Safe Operation

1. General safety requirements

1.1. Persons who have undergone a preliminary medical examination upon admission to work, as well as:

induction training;
unscheduled and targeted briefings;
fire safety briefing;
initial briefing at the workplace;
electrical safety training in the workplace.

1.2. The cut carrier must:

undergo repeated training on labor safety at the workplace at least every three months;
undergo a sanitary medical examination in accordance with the order of the Ministry of Health of the Russian Federation No. 90 dated 14.03.96;
perform only the work that is part of his duties;
use safe working methods;
comply with the requirements of prohibiting, warning, indicative and prescriptive signs and inscriptions, as well as signals given by train compilers, vehicle drivers;
be extremely careful in traffic areas.

The shearer transporter must know:

the impact on a person of dangerous and harmful production factors that arise during work;
requirements for industrial sanitation, electrical safety and fire safety;
location of first aid kits;
internal labor regulations established at the enterprise;
the requirements of this instruction, instructions on fire safety measures, instructions on electrical safety;
appointment of personal protective equipment;
rules and regulations on labor protection, safety and industrial sanitation;
be able to provide first aid to victims, use fire extinguishing equipment, call the fire brigade in the event of a fire.

1.3. The transporter in operation must be guided by the requirements of this instruction.

1.4. During operation, the transporter may be exposed to the following hazards:

increased humidity and air mobility of the working area;
increased noise levels;
moving vehicles, mechanisms, rolling stock;
insufficient lighting at night.

1.5. The transporter must use the following PPE: cotton suit, leather boots, combined gloves.

1.6. The transporter must comply with the following fire safety requirements:

smoking only in designated areas;
do not approach the gas welding machine, gas cylinders of flammable liquids, gaseous liquids and containers with impregnating oil with an open flame;
do not touch oxygen cylinders with hands contaminated with oil;
know and be able to use primary fire extinguishing equipment.

1.7. Personal clothing and overalls must be stored separately in lockers and dressing rooms. It is prohibited to take work clothes outside the enterprise.

1.8. Eating should only be in canteens, buffets or specially designated rooms with appropriate equipment. Before eating, wash your hands thoroughly with soap and water.

1.9. For non-compliance with the safety requirements set forth in this manual, the transporter is liable in accordance with applicable law.

2. Safety requirements before starting work

2.1. Before starting work, the cutter transporter must:

put on the overalls and safety shoes that are required by the norms, put them in order;
tuck the loose ends of the clothes so that they do not hang down;
establish the sequence of operations;
inspect your workplace;
make sure that containers, carts, wheelbarrows are available and in good condition;
make sure the illumination of the workplace is reliable;
check passages, driveways.

3. Safety requirements during work

3.1. Be careful while working.

3.2. Place the transported goods on the trolley evenly over the entire area, avoiding overloading any side and so that the goods do not fall off during transportation

3.3. If necessary, strengthen the load with ropes or ropes.

3.4. Do not overload the cart or wheelbarrow.

3.5. Move the trolley only in front of you, take care not to catch protruding objects and protruding parts of the equipment.

3.6. When using three-wheeled trolleys, make sure that the axle with one wheel is at the rear.

3.7. Unload and store the transported goods and semi-finished products in the places designated for them, without blocking the aisles.

3.8. It is forbidden to stack materials on faulty racks.

3.9. During breaks in work, do not leave the trolley in the aisles and driveways.

3.10. Use only designated lanes. Climbing over cars and crawling under them is prohibited

3.11. The workplace and passages to it should be kept clean, not allowing them to be cluttered with spare parts.

3.12. Be careful when moving on wet floors.

4. Safety requirements in emergency situations

4.1. In the event of an emergency, the transporter is obliged to stop work, immediately inform the master and then follow his commands.

4.3. When eliminating an emergency, it is necessary to act in accordance with the approved plan for eliminating accidents.

4.4. In the event of a fire that could lead to an explosion, you must:

notify the fire brigade immediately;
start extinguishing the fire;
organize the evacuation of people;
organize a meeting with the fire brigade.

In case of electrical fires, use only carbon dioxide or powder fire extinguishers.

4.5. If the insulation of electrical equipment is damaged, stop work, notify the master and resume work only after the damage has been eliminated.

4.6. In case of injury or illness, the transporter must stop work, transfer duties to another person, notify the master and contact the first-aid post.

5. Safety requirements at the end of work

5.1. At the end of the work, the transporter must:

tidy up the workplace and eliminate traces of spilled oil;
put the tool, inventory in a specially designated place;
collect used cleaning material in metal boxes with a tight-fitting lid;
take off your overalls and put them in the dressing room closet.

5.2. Wash contaminated clothing if necessary.

5.3. After work or in cases of contamination of body parts, take a shower.

We recommend interesting articles Section Standard instructions for labor protection:

▪ Working with antifreeze Standard instruction on labor protection

▪ Working with hand tools and fixtures. Standard instruction on labor protection

▪ Working on pad printing machines. Standard instruction on labor protection

See other articles Section Standard instructions for labor protection.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Artificial leather for touch emulation 15.04.2024

In a modern technology world where distance is becoming increasingly commonplace, maintaining connection and a sense of closeness is important. Recent developments in artificial skin by German scientists from Saarland University represent a new era in virtual interactions. German researchers from Saarland University have developed ultra-thin films that can transmit the sensation of touch over a distance. This cutting-edge technology provides new opportunities for virtual communication, especially for those who find themselves far from their loved ones. The ultra-thin films developed by the researchers, just 50 micrometers thick, can be integrated into textiles and worn like a second skin. These films act as sensors that recognize tactile signals from mom or dad, and as actuators that transmit these movements to the baby. Parents' touch to the fabric activates sensors that react to pressure and deform the ultra-thin film. This ... >>

Petgugu Global cat litter 15.04.2024

Taking care of pets can often be a challenge, especially when it comes to keeping your home clean. A new interesting solution from the Petgugu Global startup has been presented, which will make life easier for cat owners and help them keep their home perfectly clean and tidy. Startup Petgugu Global has unveiled a unique cat toilet that can automatically flush feces, keeping your home clean and fresh. This innovative device is equipped with various smart sensors that monitor your pet's toilet activity and activate to automatically clean after use. The device connects to the sewer system and ensures efficient waste removal without the need for intervention from the owner. Additionally, the toilet has a large flushable storage capacity, making it ideal for multi-cat households. The Petgugu cat litter bowl is designed for use with water-soluble litters and offers a range of additional ... >>

The attractiveness of caring men 14.04.2024

The stereotype that women prefer "bad boys" has long been widespread. However, recent research conducted by British scientists from Monash University offers a new perspective on this issue. They looked at how women responded to men's emotional responsibility and willingness to help others. The study's findings could change our understanding of what makes men attractive to women. A study conducted by scientists from Monash University leads to new findings about men's attractiveness to women. In the experiment, women were shown photographs of men with brief stories about their behavior in various situations, including their reaction to an encounter with a homeless person. Some of the men ignored the homeless man, while others helped him, such as buying him food. A study found that men who showed empathy and kindness were more attractive to women compared to men who showed empathy and kindness. ... >>

Random news from the Archive

Found a way to hear the fish inside the aquarium 31.01.2018

Physicists from Japan and South Korea have developed a metamaterial that transmits about 30 percent of the energy of sound waves.

The new metamaterial will make it possible to use sensitive condenser microphones for recording underwater sounds and significantly increase the quality of such recordings.

If the fish were constantly screaming, then people would still not notice it - 99,9 percent of the energy of sound waves is lost when passing through the water-air border. The metamaterial significantly reduces these losses: when using it, about a third of the wave energy passes through the interface. With it, conventional air microphones can be used to record underwater sounds. In this way it will be possible to hear the sounds inside the aquarium.

The fact is that the water-air interface transmits sound very poorly. The acoustic resistance of water is 3600 times greater than that of air, and therefore the energy of a sound wave when passing through their border decreases by almost three orders of magnitude. This is easy to check for yourself by tapping, for example, with two stones in the air and under water - if you hear how the stones click when hit in the water, the sound will reach your ears through your hands and body rather than through water and air.

Other interesting news:

▪ Hybrid OLED with 111,7 lm/W

▪ High Voltage MOSFETs for High Speed Switching Devices

▪ IHLP-6767DZ-11 - High Current Low Profile Inductors

▪ Phone in hours

▪ The most relevant brands of our time

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the site Protection of electrical equipment. Article selection

▪ article And nothing was reflected on his high forehead. Popular expression

▪ article Where and when were beer boilers converted into armored vehicles? Detailed answer

▪ article Non-ionizing radiation

▪ article Device for the selection of poison from bees. Encyclopedia of radio electronics and electrical engineering

▪ article Charger. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews