Job description for a repairman of the chief engineer department

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for a repairman in the department of the chief engineer. Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

A repairman in the department of the chief engineer of the production manager's service (hereinafter referred to as a repairman) belongs to the category of workers who directly ensure the preparation of work at the production site in accordance with shift assignments.
A person who has primary vocational education in this specialty with at least 1 year of work experience is appointed to the position of repairman.
This instruction does not exempt the employee from following any other instructions of the chief engineer and production manager that are not taken into account within the limits of the employee’s specialty and qualifications.
Appointment to the position of mechanic-repairman and dismissal from it are made by order of the director of the enterprise, upon the recommendation of the chief engineer.
The repairman reports directly to the power engineer.
The repairman in his work is guided by:

the goals of the enterprise;
current legislation of Ukraine;
orders, instructions and orders of higher management;
rules and regulations of labor protection, safety, fire safety, industrial sanitation and internal labor regulations in force at the enterprise.

The repairman must know:

technological processes of manufactured glass and mirror products;
be able to read blueprints;
know the basics of the theory of metal cutting within the work performed;
rules for determining cutting conditions according to the passport and reference book;
kinematic and electrical diagrams of serviced machines;
design and rules for using complex instrumentation and instruments;
design features of universal, special devices and other equipment;
ways to install the tool;
enterprise standards and methodological quality instructions as they relate to its activities;
rules and regulations of labor protection, safety and fire protection;
internal labor regulations in force at the enterprise.

II. Official duties

Repairman:

Timely repairs the equipment of the production site.
Conducts scheduled preventive maintenance (PPR) of equipment according to the PPR schedule.
Identifies the causes of premature wear of equipment, takes measures to prevent and eliminate them.
Repairs technical equipment and carries out minor repairs to components and mechanisms of machine tools.
Keeps records of existing equipment (mandrels, fixtures, etc.) and promptly provides information to the power engineer about ordering spare parts.
Performs work using special devices and tools.
Performs operations related to setting up machines.
Produces parts for machine tools at the direction of the power engineer.
Informs the power industry about all the shortcomings in the quality of parts.
Treats equipment and accessories with care and maintains it in working condition and cleanliness, and does not leave operating equipment unattended.
Maintains cleanliness and order in the workplace and area.
Complies with the rules of the internal regulations of the workshop and the mode of operation.
Complies with the rules of labor protection, safety and fire safety in accordance with current instructions.

III. Rights

The repairman has the right to:

Submit proposals for improving equipment maintenance, improving technological processes, improving equipment, and improving the aesthetics of work for consideration by the chief engineer and heads of structural divisions.
Demand the provision of normal working conditions at the site.
Receive information and instructions from the power engineer regarding the emergence of new types of work on the site.
Require the administration to ensure the rules of labor protection, safety and fire safety.
Require the provision of overalls in accordance with applicable regulations.
Make suggestions for improving technological processes, improving tooling, equipment, improving the aesthetics of work, and others.

IV. A responsibility

The Maintenance Technician is responsible for:

Timely and high-quality implementation of scheduled preventative repairs for equipment downtime caused by the fault of a repairman.
Production of parts according to the technological process.
Compliance with the rules of labor protection, safety and fire safety.
Cleanliness and order in the workplace.
Improper performance or non-performance of their official duties provided for by this Job Description - within the limits determined by the current labor legislation of Ukraine.
Offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine.
Causing material damage - within the limits determined by the current labor and civil legislation of Ukraine.

We recommend interesting articles Section Job descriptions:

▪ Accountant-cashier. Job description

▪ Physician-methodologist. Job description

▪ Laboratory assistant. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

Batteries from used glass containers 01.05.2017

Scientists at the University of California at Riverside believe that in the foreseeable future, glass bottles could become the raw material for the creation of lithium-ion batteries.

The authors of the original idea note that bottle glass is a very cheap and promising raw material for creating new generation batteries, because today it is difficult to estimate the enormous volumes of used glass containers that end up in landfills. Scientists believe that the silicon dioxide contained in glass can be used to make anodes in lithium-ion batteries, despite its lower stability than graphite electrodes.

The conclusions of scientists are based on the results of the experiments. Used bottles were first ground to a fine powder, which was then subjected to special treatments. As a result, it was possible to obtain nanostructured silicon dioxide suitable for use in batteries for a long period of time.

The developers claim that one glass bottle can become the raw material for creating hundreds of "coin" batteries or several cells of a more powerful battery. It is noted that the use of such raw materials will contribute to a significant reduction in the cost of lithium-ion power supplies.

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the site Electronic directories. Article selection

▪ article Correspondence of models and chassis of TVs. Directory

▪ article What makes football fields look striped? Detailed answer

▪ article Working with an angle grinder. Standard instruction on labor protection

▪ article Security device with iButton keys and shock sensor. Encyclopedia of radio electronics and electrical engineering

▪ article Standards for testing electrical equipment and devices for electrical installations of consumers. Permissible values of DC resistance of KRU elements. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews