Job description for a nurse in a dental office

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for a nurse in a dental office. Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The appointment and dismissal of a nurse of a dental office is carried out by the chief physician of the clinic in accordance with applicable law.
The dental office nurse reports directly to the dentist and works under his supervision.
In her work, the nurse of the dental office is guided by this Job Description and other official documents.

II. Official duties

Prepare workplaces before an outpatient appointment with dentists, controlling the availability of medical instruments (burs, canal fillers, etc.), medicines, inventory, and documentation in the required amount.
Check the health of the drill before starting work.
Sterilize and lay out instruments on a sterile table.
Help the doctor at the reception in the preparation of filling material, during various manipulations.
Observe the rules for the use of equipment, tools, the consumption of medicines, filling material.
Monitor the serviceability of electromechanical equipment, in the event of a malfunction, disconnect it from the network and notify the administration.
Write out requirements for medicines, cotton wool, etc. and receive them from the head (senior) nurse.
Strictly monitor the preservation of the labels on the vials.
Participate in the conduct of sanitary and educational work among patients.
Systematically improve their skills by studying the relevant literature, participating in conferences, seminars.

III. Rights

The dental office nurse has the right to:

present requirements to the administration of the polyclinic to create the necessary conditions at the workplace, ensuring the high-quality performance of their duties;
take part in meetings (meetings) when discussing the work of the dental office;
receive the necessary information for the performance of their functional duties from the dentist, the head nurse of the department (responsible for the office), the head nurse;
require visitors to comply with the internal regulations of the clinic;
master a related specialty;
give instructions and supervise the work of the junior medical staff of the dental office;
to improve their qualifications in the workplace, advanced training courses in the prescribed manner.

IV. A responsibility

The dental office nurse is responsible for:

For improper performance or non-performance of their official duties provided for by this Job Description - within the limits determined by the current labor legislation of Ukraine.
For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine.
For causing material damage - within the limits determined by the current labor and civil legislation of Ukraine.

We recommend interesting articles Section Job descriptions:

▪ Cook of a preschool educational institution. Job description

▪ Trading broker. Job description

▪ Bulldozer and scraper operator. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

Global transport system with airships 02.09.2019

Rising to a height of 10 to 20 kilometers, airships will be able to be transported by the power of the polar jet stream - a narrow and powerful stream that blows steadily in the upper troposphere.

The era of airships ended in 1937, when the passenger Hindenburg caught fire and died during landing. This disaster was not the largest, but it turned out to be the last straw: a dangerous mode of transport was abandoned, despite all its efficiency. Perhaps now is the time to return to zeppelins - already at a new level and with new technologies. It is not for nothing that many companies in the world are already developing their transportation systems using such lighter-than-air vehicles.

Some of the prospects for cargo transportation by airships were appreciated by Julian Hunt and his colleagues. Their concept relies on truly large size machines; the authors write about airships ten times larger than the Hindenburg, which was 245 meters long. In theory, this will increase the carrying capacity by three orders of magnitude, even in comparison with the Hindenburg, which could take on board up to 100 tons of payload.

Rising to a height of 10 to 20 kilometers, such giants can be carried by the power of the polar jet stream - a narrow and powerful stream that blows steadily in the upper troposphere. In the temperate latitudes of the Northern Hemisphere, it is directed from west to east and reaches an average speed of 165 km/h. According to the calculations of Hunt and his colleagues, "riding" this stream, huge airships will be able to make a complete trip around the Earth in 16 days, carrying tens of thousands of tons of cargo and practically not consuming energy. A similar route in the Southern Hemisphere will take 14 days.

Thanks to modern materials and technology, huge cargo airships can become much safer than the Hindenburg, whose shell was made from animal intestines - today it can be made from carbon fiber. On the other hand, the "buoyancy" necessary for traveling with the wind can still be provided only by light gas. The only economically available option for it today remains the same hydrogen, the flammability of which was so clearly demonstrated by the Hindenburg. And if an accident does happen, it’s even scary to imagine what the explosion of a thousand-ton zeppelin with a kilometer-long hydrogen cylinder will turn into.

Other interesting news:

▪ Liquid crystal current transmission cable

▪ Virtium 4GB DDR64 VLP RDIMMs

▪ New BMW bulbs won't need to be replaced

▪ LG Stylus 2 Smartphone with DAB+ Digital Broadcasting

▪ All Samsung electronics will be equipped with artificial intelligence

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ site section And then an inventor (TRIZ) appeared. Article selection

▪ article Fundamentals of sociology and political science. Crib

▪ article Who was the first ruler of England? Detailed answer

▪ article Real pistachio. Legends, cultivation, methods of application

▪ article Monoblock stereo loudspeaker. Encyclopedia of radio electronics and electrical engineering

▪ article Automotive VHF FM tuner. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews