Adata ISSS332 Industrial Grade Solid State Drives. Free Technical Library News

NEWS OF SCIENCE AND TECHNOLOGY, NOVELTY IN ELECTRONICS
Free technical library / timeline

Adata Industrial Grade Solid State Drives ISSS332

11.12.2015

The ISSS332 industrial-grade solid state drives have expanded the Adata range. 2,5-inch drives are equipped with a SATA 6 Gb / s interface. They are available in versions designed for operation in the normal (-10°C to 80°C) and extended (-40°C to 90°C) temperature ranges.

The sequential read speed reaches 560 MB / s, sequential write - 450 MB / s. MTBF is claimed to be 2 million hours.

Adata ISSS332 drives are available in SLC and MLC NAND flash options. SLC NAND flash drives are available in capacities from 8 GB to 256 GB. ISSS332 MLC NAND flash drives are available in capacities from 16 GB to 1 TB. All of them support SMART, NCQ and TRIM.

<< Back: TV damages the brain 11.12.2015

>> Forward: No differences found between male and female brains 10.12.2015

Latest news of science and technology, new electronics:

The existence of an entropy rule for quantum entanglement has been proven 09.05.2024

Quantum mechanics continues to amaze us with its mysterious phenomena and unexpected discoveries. Recently, Bartosz Regula from the RIKEN Center for Quantum Computing and Ludovico Lamy from the University of Amsterdam presented a new discovery that concerns quantum entanglement and its relation to entropy. Quantum entanglement plays an important role in modern quantum information science and technology. However, the complexity of its structure makes understanding and managing it challenging. Regulus and Lamy's discovery shows that quantum entanglement follows an entropy rule similar to that for classical systems. This discovery opens new perspectives in the field of quantum information science and technology, deepening our understanding of quantum entanglement and its connection to thermodynamics. The results of the study indicate the possibility of reversibility of entanglement transformations, which could greatly simplify their use in various quantum technologies. Opening a new rule ... >>

Mini air conditioner Sony Reon Pocket 5 09.05.2024

Summer is a time for relaxation and travel, but often the heat can turn this time into an unbearable torment. Meet a new product from Sony - the Reon Pocket 5 mini-air conditioner, which promises to make summer more comfortable for its users. Sony has introduced a unique device - the Reon Pocket 5 mini-conditioner, which provides body cooling on hot days. With it, users can enjoy coolness anytime, anywhere by simply wearing it around their neck. This mini air conditioner is equipped with automatic adjustment of operating modes, as well as temperature and humidity sensors. Thanks to innovative technologies, Reon Pocket 5 adjusts its operation depending on the user's activity and environmental conditions. Users can easily adjust the temperature using a dedicated mobile app connected via Bluetooth. Additionally, specially designed T-shirts and shorts are available for convenience, to which a mini air conditioner can be attached. The device can oh ... >>

Energy from space for Starship 08.05.2024

Producing solar energy in space is becoming more feasible with the advent of new technologies and the development of space programs. The head of the startup Virtus Solis shared his vision of using SpaceX's Starship to create orbital power plants capable of powering the Earth. Startup Virtus Solis has unveiled an ambitious project to create orbital power plants using SpaceX's Starship. This idea could significantly change the field of solar energy production, making it more accessible and cheaper. The core of the startup's plan is to reduce the cost of launching satellites into space using Starship. This technological breakthrough is expected to make solar energy production in space more competitive with traditional energy sources. Virtual Solis plans to build large photovoltaic panels in orbit, using Starship to deliver the necessary equipment. However, one of the key challenges ... >>

New method for creating powerful batteries 08.05.2024

With the development of technology and the expanding use of electronics, the issue of creating efficient and safe energy sources is becoming increasingly urgent. Researchers at the University of Queensland have unveiled a new approach to creating high-power zinc-based batteries that could change the landscape of the energy industry. One of the main problems with traditional water-based rechargeable batteries was their low voltage, which limited their use in modern devices. But thanks to a new method developed by scientists, this drawback has been successfully overcome. As part of their research, scientists turned to a special organic compound - catechol. It turned out to be an important component that can improve battery stability and increase its efficiency. This approach has led to a significant increase in the voltage of zinc-ion batteries, making them more competitive. According to scientists, such batteries have several advantages. They have b ... >>

Alcohol content of warm beer 07.05.2024

Beer, as one of the most common alcoholic drinks, has its own unique taste, which can change depending on the temperature of consumption. A new study by an international team of scientists has found that beer temperature has a significant impact on the perception of alcoholic taste. The study, led by materials scientist Lei Jiang, found that at different temperatures, ethanol and water molecules form different types of clusters, which affects the perception of alcoholic taste. At low temperatures, more pyramid-like clusters form, which reduces the pungency of the "ethanol" taste and makes the drink taste less alcoholic. On the contrary, as the temperature increases, the clusters become more chain-like, resulting in a more pronounced alcoholic taste. This explains why the taste of some alcoholic drinks, such as baijiu, can change depending on temperature. The data obtained opens up new prospects for beverage manufacturers, ... >>

Random news from the Archive

Each 3D printer is unique in its own way. 24.10.2018

As the experiments of researchers from the University of Buffalo have shown, the same objects made on different 3D printers can be quite distinguished from each other.

The authors of the work proceeded from the fact that each 3D printer, like the same typewriter, reproduces some of its characteristic prints over and over again. Therefore, you just need to understand what kind of prints they are, and learn how to "read" them. A series of identical objects were printed on different printers (14 in total), after which detailed images of each of them were obtained using a scanner. Upon closer examination, it turned out that each printed object had characteristic geometric parameters and texture features. By translating the obtained data into a numerical form, it was possible to calculate the degree of difference between one object and another.

It turned out that the mechanical features that affect the movement of the nozzle, the flow of material, etc. are all rather unique parameters for a particular 3D printer. Based on the totality of such characteristics, it is possible to compare the printed object with a specific apparatus with high accuracy. The researchers also tried to test what is called the strength of their method by testing ways in which you can erase individual fingerprints or try to pass off one device for another. It turned out that whether it is a change in the workplace and printing parameters, or a six-month break in the operation of the printer, or physical damage to printed objects - all this has little effect on the accuracy of identification.

3D printing, like many other things, can be used not only for good, but also for harm. Someone prints weapons, someone forges various parts or makes other bad things. Naturally, forensic scientists would like to have some methods to distinguish one printer from another by their products.

Of course, it is too early to say that all 3D printers sold will be listed in special file cabinets, as is done, for example, with rifled weapons. However, those who attempt to use 3D printing for criminal purposes should be aware that the results of their actions will not remain anonymous.

See full Archive of science and technology news, new electronics

All languages of this page

Home page | Library | Articles | Website map | Site Reviews