Instruction on labor protection for a picker of materials, cuts and products

Free technical library

OCCUPATIONAL SAFETY AND HEALTH
Free library / Occupational Safety and Health / Standard instructions for labor protection

Instructions on labor protection for a picker of materials, cuts and products. Full Document

Occupational Safety and Health

Occupational Safety and Health / Standard instructions for labor protection

Comments on the article

Safe Operation

1. General requirements for labor protection

1.1. When applying for a job, each worker must undergo an introductory general safety briefing, and when transferring him from one job to another, (at least for a short time, as well as from one workshop to another, he must go through the foreman, since the safety precautions at that workplace which he will serve with.

1.2. Persons no younger than are allowed to work independently as a picker of materials, cuts and products. 18 years old who have passed a medical examination, trained in maintenance, safe labor methods and techniques, when picking materials, cut and product, who have studied safety instructions and have been instructed at the workplace.

2. Labor protection requirements before starting work

2.1. Put on work clothes, keep your hair under a hat.

Do not allow hanging ends of clothing.

2.2. Perform only the work that is authorized by the administration of the shop.

2.3. Do not start work without passing the briefing.

2.4. The picker of materials, cut and products must work on the principle of the typewriter.

3. Labor protection requirements during work

3.1. Be attentive, do not get distracted and do not enthrall others.

3.2. Do not allow people who are not related to your work to your workplace.

3.3. Do not block passages and driveways.

3.4. Do not lift the load beyond the permissible norm.

3.5. Do not lie on the edge of the worker steel cutting tools (scissors).

4. Labor protection requirements in emergency situations

4.1. In case of injury, contact the first-aid post and inform the head.

4.2. If any malfunctions are found, call a repairman after disconnecting the equipment from the power supply.

5. Safety requirement at the end of work

5.1. Clean up your workspace.

5.2. Check the storage status of materials.

5.3. Take personal hygiene measures.

We recommend interesting articles Section Standard instructions for labor protection:

▪ Grocery seller. Standard instruction on labor protection

▪ Turner. Standard instruction on labor protection

▪ Bar machine operator. Standard instruction on labor protection

See other articles Section Standard instructions for labor protection.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Artificial leather for touch emulation 15.04.2024

In a modern technology world where distance is becoming increasingly commonplace, maintaining connection and a sense of closeness is important. Recent developments in artificial skin by German scientists from Saarland University represent a new era in virtual interactions. German researchers from Saarland University have developed ultra-thin films that can transmit the sensation of touch over a distance. This cutting-edge technology provides new opportunities for virtual communication, especially for those who find themselves far from their loved ones. The ultra-thin films developed by the researchers, just 50 micrometers thick, can be integrated into textiles and worn like a second skin. These films act as sensors that recognize tactile signals from mom or dad, and as actuators that transmit these movements to the baby. Parents' touch to the fabric activates sensors that react to pressure and deform the ultra-thin film. This ... >>

Petgugu Global cat litter 15.04.2024

Taking care of pets can often be a challenge, especially when it comes to keeping your home clean. A new interesting solution from the Petgugu Global startup has been presented, which will make life easier for cat owners and help them keep their home perfectly clean and tidy. Startup Petgugu Global has unveiled a unique cat toilet that can automatically flush feces, keeping your home clean and fresh. This innovative device is equipped with various smart sensors that monitor your pet's toilet activity and activate to automatically clean after use. The device connects to the sewer system and ensures efficient waste removal without the need for intervention from the owner. Additionally, the toilet has a large flushable storage capacity, making it ideal for multi-cat households. The Petgugu cat litter bowl is designed for use with water-soluble litters and offers a range of additional ... >>

The attractiveness of caring men 14.04.2024

The stereotype that women prefer "bad boys" has long been widespread. However, recent research conducted by British scientists from Monash University offers a new perspective on this issue. They looked at how women responded to men's emotional responsibility and willingness to help others. The study's findings could change our understanding of what makes men attractive to women. A study conducted by scientists from Monash University leads to new findings about men's attractiveness to women. In the experiment, women were shown photographs of men with brief stories about their behavior in various situations, including their reaction to an encounter with a homeless person. Some of the men ignored the homeless man, while others helped him, such as buying him food. A study found that men who showed empathy and kindness were more attractive to women compared to men who showed empathy and kindness. ... >>

Random news from the Archive

Changing the state of matter with a flash of light 29.10.2018

In physics there is such a concept - charge density waves. We are talking about the distribution of charge in conductors, as a rule - in metals. It is uneven: somewhere there are more electrons, somewhere there are more positively charged ions. The phenomenon is associated with the structure of the crystal lattice and, in general, is well studied.

However, "not bad" in physics never means "not at all". This is exactly what a team of scientists from the SLAC National Accelerator Laboratory of the Department of Energy and the Massachusetts Institute of Technology has demonstrated by finding a simple and very fast way to invert these waves. A flash of laser light is used as a "switch".

As a test material, the experimenters used tantalum disulfide. Its crystal was irradiated coherently at a wavelength of 800 nm. The pulse duration was 80 femtoseconds. The area of the irradiated sample was 150 x 150 micrometers, with a thickness of 50 nanometers.

As it turned out, under these conditions, the charge of the observed regions after each flash changes to the opposite, and after the next - back.

This holds great promise in areas such as memory design. In today's devices, information is stored and retrieved by magnetizing materials. "Here we have changed another feature of the material, known as charge density waves," says Alfred Zong, one of the study's lead authors.

Other interesting news:

▪ Bolt Wireless Protocol for Keyboards and Mice

▪ Advertising poster look counter

▪ Semiconductor materials from the sewer

▪ VIPER26K regulators with built-in MOSFET 1050 V

▪ GIGABYTE GB-BNi5G4-1050Ti barebone system

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the Electrician website. PUE. Article selection

▪ article End of story. Popular expression

▪ article What is a bloodhound? Detailed answer

▪ article Neurologist. Standard instruction on labor protection

▪ article Sensors for burglar alarms. Encyclopedia of radio electronics and electrical engineering

▪ article Coins across. Focus secret

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews