Job description for the chief researcher

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for chief researcher. Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

A person who has an academic degree of Doctor of Science, major scientific works or diplomas for discoveries and copyright certificates for inventions, as well as results implemented in practice, scientific authority in the relevant field of knowledge is appointed to the position of chief researcher.
Appointment to a position and dismissal from it are made by order of the director of the organization upon presentation.
The Chief Scientist should know:

scientific problems of the relevant field of knowledge, science and technology, directions of development of the economic sector, guidance materials from higher and other bodies;
domestic and foreign achievements on these issues;
the latest methods, means and practices of planning, organizing, conducting and implementing scientific research and development (assessment, patent information support, production of scientific and technical documentation, etc.);
forms of economic incentives and material incentives for workers;
current legislature;
organization of labor, production and management;
rules and regulations of labor protection.

The Chief Research Officer reports directly to _______.

II. Official duties

Chief Researcher:

Provides scientific supervision of research on the most important scientific problems of a fundamental and applied nature, including scientific and technical programs, and directly participates in their implementation.
Formulates new areas of research and development, organizes the preparation of a work program, determines methods and means for their implementation.
Participates in the formation of plans for research work, coordinates the activities of co-executors involved in joint work with other institutions (organizations) in the tasks assigned to him.
Summarizes the results obtained, conducts research examination of completed research and development.
Determines the scope of application of the results of scientific research and development and provides scientific guidance for the practical implementation of these results.
Carries out training and advanced training of scientific personnel in the relevant field of knowledge.

III. Rights

The chief researcher has the right to:

Get acquainted with the draft decisions of the organization's management regarding its activities.
On issues within his competence, submit proposals for the consideration of the organization’s management to improve the organization’s activities and improve working methods; comments on the activities of the organization’s employees; options for eliminating existing shortcomings in the organization’s activities.
Request personally or on behalf of the management of the organization from the heads of departments and specialists information and documents necessary for the performance of his duties.
Involve specialists from all (individual) structural divisions in solving the tasks assigned to him (if this is provided for by the regulations on structural divisions, if not, then with the permission of the head).
Require the management of the organization to assist in the performance of his duties and rights.

IV. A responsibility

The chief researcher is responsible in the following cases:

For improper performance or non-performance of their official duties provided for by this Job Description - within the limits determined by the current labor legislation of Ukraine.
For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine.
For causing material damage - within the limits determined by the current labor and civil legislation of Ukraine.

We recommend interesting articles Section Job descriptions:

▪ Typesetter. Job description

▪ Auto electrician. Job description

▪ Roofer for rolled roofs and roofs made of artificial materials. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

Mirrorless camera Panasonic Lumix DMC-G7 19.05.2015

Panasonic introduced the Lumix DMC-G7 mirrorless camera with interchangeable lenses. The novelty has replenished the family of devices of the Micro Four Thirds standard. The camera is endowed with a 17,3 x 13 mm CMOS sensor with 16 million effective pixels and a powerful Venus Engine image processor. The 3-inch tilt-and-turn display with touch control makes it easy to take self-portraits and work in conditions where the camera has to be held below or above eye level.

The light sensitivity is ISO 160-25600, the shutter speed range is 1/4000-60 s. Materials are stored on SD/SDHC/SDXC memory cards. There is a stereo microphone, a USB 2.0 port and an HDMI interface.

The camera supports ultra-high definition video recording in 4K format with a resolution of 3840 x 2160 pixels (30, 25, 24, 20 frames per second). In addition, Full HD (1920 x 1080 pixels) video recording at up to 60 frames per second is possible.

Model Lumix DMC-G7 allows you to take sequential photos in maximum resolution at a speed of 7 frames per second. 4K Burst Shooting lets you capture a virtually unlimited number of 4K photos while holding down the shutter button. 4K Pre-burst mode allows you to capture 60 4K images before/after you press the shutter button. In this case, you can choose between four resolutions: 3840 x 2160 (16:9 aspect ratio), 3328 x 2496 (4:3), 3504 x 2336 (3:2) or 2880 x 2880 (1:1) pixels.

The camera is equipped with a fast autofocus system, an electronic viewfinder with 100% frame coverage and a Wi-Fi wireless adapter. Dimensions are 125 x 86 x 77 mm, weight - 410 grams.

The Lumix DMC-G7 will be available for an estimated price of $800 with a 14-42mm lens or $1100 with a 14-140mm lens.

Other interesting news:

▪ Embroidery of electrons by ion

▪ Not a single paper is lost

▪ LSM6DSO32 chip for MEMS motion sensors

▪ Mushkin Ventura Ultra 3.0 USB Drive

▪ TV for mobile phones: crazy growth expected

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ site section Voltage converters, rectifiers, inverters. Article selection

▪ article by Shams al-Din Mahammad ibn Ashraf al-Husayn al-Samarkandi. Famous aphorisms

▪ What wind is considered a hurricane? Detailed answer

▪ article Pigeon peas. Legends, cultivation, methods of application

▪ article Chokeless power supply of fluorescent lamps. Encyclopedia of radio electronics and electrical engineering

▪ article Water-cooled bipolar voltage stabilizer, 220/±41 volts 4 amps. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews