Job description for a pharmacist-analyst

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for a pharmacist-analyst. Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The pharmacist-analyst reports directly to _______.
The pharmacist-analyst follows the instructions of _______.
The pharmacist-analyst replaces _______.
Analyst pharmacist replaces _______.
Must know:

the current legislation on health protection and regulatory documents regulating the activities of government bodies and healthcare institutions;
organization of the pharmaceutical service;
fundamentals of law in medicine;
rights, duties and responsibilities of a pharmacist-analyst;
organization of a quality control system for medicines at the stages of development, manufacture, distribution, transportation, storage and consumption;
methods of quality control of medicines manufactured according to individual prescriptions and frequently repeated prescriptions, according to the requirements of medical institutions;
general methods of forensic chemical research of physical evidence and laboratory express analysis in order to establish the causes of poisoning, the determination of narcotic and other substances that cause intoxication;
technology for the manufacture of dosage forms;
storage conditions for medicines and medical products;
methods for conducting targeted pharmaceutical examinations and laboratory work;
documentation rules;
advanced information and Internet technologies;
modern scientific literature and scientific and practical periodicals in the specialty, methods of its analysis and generalization.

Qualification requirements:

Pharmacist-analyst of the highest qualification category: higher education (specialist, master) in the direction of training "Pharmacy", specialty "Pharmacy". Passing an internship in the specialty "General Pharmacist" with subsequent specialization in the specialty "Pharmacist-Analyst". Advanced training (improvement courses, internships, pre-certification cycles, etc.). Availability of a certificate of a pharmacist-specialist and a certificate of assignment (confirmation) of the highest qualification category in this specialty. More than 10 years of professional experience.
Pharmacist-analyst of the 7st qualification category: higher education (specialist, master) in the field of study "Pharmacy", specialty "Pharmacy". Passing an internship in the specialty "General Pharmacist" with subsequent specialization in the specialty "Pharmacist-Analyst". Advanced training (improvement courses, internships, pre-certification cycles, etc.). Availability of a certificate of a pharmacist-specialist and a certificate of assignment (confirmation) of the I qualification category in this specialty. Work experience in the specialty for more than XNUMX years.
Pharmacist-analyst of the II qualification category: higher education (specialist, master) in the direction of preparation "Pharmacy", specialty "Pharmacy". Passing an internship in the specialty "General Pharmacist" with subsequent specialization in the specialty "Pharmacist-Analyst". Advanced training (improvement courses, internships, pre-certification cycles, etc.). Availability of a certificate of a pharmacist-specialist and a certificate of assignment (confirmation) of the II qualification category in this specialty. Work experience in the specialty for more than 5 years.
Pharmacist-analyst: higher education (specialist, master) in the direction of training "Pharmacy", specialty "Pharmacy". Passing an internship in the specialty "General Pharmacist" with subsequent specialization in the specialty "Pharmacist-Analyst". The presence of a certificate of a pharmacist-specialist. No requirement for work experience.

II. Official duties

It is guided by the current legislation of Ukraine on health protection and regulatory legal acts that determine the activities of government bodies and healthcare institutions, the organization of the pharmaceutical service.
Carries out a qualitative and quantitative analysis of medicines for industrial and pharmaceutical production, taking into account the requirements of regulatory and technical documentation.
Carries out Intra-pharmaceutical procurement, distributes work between packers, accepts packaged products.
Monitors the correctness of the design of the stem eye with stocks of medicines.
Completes the order of departments and institutions, dispenses medicines and controls the correctness of prescriptions for the individual production of medicines.
Quality control of drugs manufactured according to extemporaneous formulations.
Maintains current and reporting documentation.
Conducts targeted pharmaceutical surveys of pharmacies and other institutions in order to assess the state of quality control of medicines during their manufacture, transportation, storage and dispensing.
Supervises the work of paramedical staff.
Constantly improves his professional level.

III. Rights

The pharmacist-analyst has the right:

Get acquainted with the draft decisions of the management of the enterprise regarding its activities.
Participate in the discussion of issues related to the performance of his duties.
Make suggestions for improving the work related to the provisions of this instruction.
Within the limits of his competence, inform his immediate supervisor about all those identified in the course of his activities, and make proposals for their elimination.
Require the management of the enterprise to assist in the performance of their duties.

IV. A responsibility

The pharmacist-analyst is responsible for:

For improper performance or non-performance of their official duties, as well as for non-use or directly to their rights provided for by this Job Description - to the extent determined by the current legislation of Ukraine.
For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine.
For causing material damage - within the limits determined by the current labor legislation on labor of Ukraine.

We recommend interesting articles Section Job descriptions:

▪ Material Accountant. Job description

▪ Trolleybus driver. Job description

▪ Washing machine operator. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

INA260 - digital current, voltage and power meter with built-in shunt 11.05.2018

The INA260 chip from Texas Instruments allows you to measure current, voltage and power in circuits up to 36 V, 15 A. Guaranteed accuracy is provided by a 2 mΩ shunt built into the microcircuit. The internal shunt has an accuracy of 0.1% and is connected according to the Kelvin circuit, so the measurement results do not depend on the length and cross section of the conductors to the measured circuit.

The INA260 can measure forward and reverse current in both the high and low side. The microcircuit internally multiplies the measured voltage and current values and outputs the resulting power.

The ADC of the microcircuit has a capacity of 16 bits. The price of the least significant digit for the measured current is 1,25 mA, voltage 1,25 V and power 10 mW. The conversion time can be selected from 140 µs to 8 ms (8 values). A special programmable output Alert is designed to signal the end of the conversion or to warn of an overload in voltage, current or power. To reduce fluctuations in readings, you can turn on automatic averaging - from 4 to 1024 times.

The internal shunt can withstand an overload of up to 100 amps for 200 milliseconds and at least 30 amps for a minute. The INA260 operates from a single 2,7...5,5 V supply, typical consumption is 310 µA. Temperature range -40°C to +125°C.

Other interesting news:

▪ World's largest digital camera under construction

▪ Elastic Stopwatch

▪ Water replacement for lithium-ion batteries

▪ The world's first robot with citizenship

▪ Revealed the secret of dog friendliness

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the site Car. Article selection

▪ article I am an old soldier and do not know the words of love. Popular expression

▪ article Which animals hibernate immediately after birth? Detailed answer

▪ Article Chief Designer. Job description

▪ article Drop-down boards. Encyclopedia of radio electronics and electrical engineering

▪ article Economical signaling device for the presence of mains voltage. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews