Job description for a bookbinder

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for bookbinder. Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

General provisions

The binder is appointed to the position and dismissed from the position in accordance with the procedure established by the Labor Code, by order _______.
The bookbinder reports directly to _______.
During the period of temporary absence of the Binder, his duties are assigned to (position title).
The position of a Bookbinder may be held by a person who has a secondary technical education and at least 2 (two) years of work experience.
The binder must know:

standard formats;
rules for cutting cardboard and technical fabric and technical requirements for them;
rules for completing and binding documents;
rules for drilling holes and sharpening knives and drills;
technical requirements for bookbinding, types and methods of restoration of bookbinding;
properties of materials from which bound books and documents are made;
properties of adhesives used during restoration bookbinding, their formulation and preparation.

In the case of performing more complex bookbinding and restoration work, he must know the rules for their implementation and have the ability to:

production of various types of endpapers (cap, glued, stitched, sewn);
sewing book blocks in different ways and methods;
manufacture of leather paper;
restoration of books in leather bindings (preparation of lubricating oil to soften leather bindings; making edging (braid from fabric);
removal and restoration of individual elements of the binding under the guidance of an artist-restorer.

II. Official duties

Bookbinder:

binds documents (texts) manually;
sorts cardboard, cuts it into a format along the longitudinal line, prepares the binding spine from technical fabric;
selects documents (texts) by numbers and formats, collides sheets, puts sheets of cardboard from below and above, puts them into forms;
drills holes, stitches documents (texts), seals the spine of the binding;
prepares and sticks labels on the spine of the binding and on the top cover;
monitors the technical condition of working tools;
binds by hand old books and documents that need it;
carries out restoration (binding) work, restores damaged bindings, disinfects them;
strengthens and restores corners, edges, covers;
prepares new bindings for rare, rare and especially valuable texts, strengthens old bindings;
restores leather-bound books.

III. Rights

The binder has the right:

To be present at the acceptance of an order for the execution of binding works.
Provide opinions on the condition of documents sent to him to assess the condition of the binding (binding), the possibility and degree of restoration.
Report to the management about all identified shortcomings and put forward proposals within their competence.
To make proposals for the improvement of work related to the responsibilities provided for in this Instruction.

IV. A responsibility

The binder is responsible for:

The quality and timeliness of the fulfillment of the duties assigned to him by this job description.
Compliance with the internal labor regulations of the enterprise.
Compliance with instructions on labor protection, fire safety and industrial sanitation.

We recommend interesting articles Section Job descriptions:

▪ Laboratory operator of a photo lab. Job description

▪ Intellectual property appraiser. Job description

▪ Forwarder. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

External SSDs up to 2TB Samsung T5 16.08.2017

Samsung has launched the T5 series of portable solid state drives, designed for demanding users and professionals involved in processing large amounts of data.

Information storage devices are made using 64-layer 3D V-NAND flash memory microchips. The USB 3.1 Gen 2 interface is used to connect to a computer; the declared data transfer rate reaches 540 MB/s.

The Samsung T5 family includes 250GB and 500GB blue drives, as well as black 1TB and 2TB models.

Device dimensions are 74 x 57,3 x 10,5 mm, weight - 51 grams. Products are able to withstand drops from a height of up to 1,8 meters. It also talks about the support for encryption of information using the AES algorithm with a key length of 256 bits.

The scope of delivery includes USB-C - USB-C and USB-C - USB-A connection cables.

As for prices, the younger version of the drive, designed to store 250 GB of information, will cost $ 130, and for the 500 GB version you will have to pay $ 200. Devices with a capacity of 1 and 2 TB are priced at $400 and $800, respectively.

Other interesting news:

▪ Synesthesia can be taught

▪ The brain turns words into pictures

▪ Solar canopy with flexible panels and LED lights

▪ Ancient people poisoned with heavy metals

▪ Why there is no point in arguing about tastes

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the site Reference materials. Article selection

▪ article Lovelas (Lavlas, Lovlas). Popular expression

▪ article Is it possible to communicate with a whistle? Detailed answer

▪ article Producer of natural sausage casing. Job description

▪ article Car radio transmitters. Encyclopedia of radio electronics and electrical engineering

▪ article Cable lines up to 220 kV. Laying of cable lines in cable blocks, pipes and reinforced concrete trays. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews